How To Fix The Error Code 44958 For Whirlpool Dishwasher

(Many of the links in this article redirect to a specific reviewed product. Your purchase of these products through affiliate links helps to generate commission for Storables.com, at no extra cost. Learn more)

Uh-Oh! Is Your Whirlpool Dishwasher Giving You Error Code 44958? Here’s How to Fix It!

There’s nothing more frustrating than encountering a stuck key on the user interface of your Whirlpool dishwasher. Not only does it hinder the operation of your appliance, but it also leaves you wondering how to resolve the issue. But fret not! As an expert on this subject, I’m here to guide you on how to fix the error code 44958 on your Whirlpool dishwasher.

What Does Error Code 44958 Mean?

Before diving into the solution, let’s understand what this error code signifies. Error code 44958 on your Whirlpool dishwasher indicates a stuck key on the user interface. Essentially, one or more buttons on the control panel are being pressed or “stuck” continuously, preventing the dishwasher from functioning correctly.

Check the power supply and make sure the dishwasher is properly connected. If the error persists, try resetting the dishwasher by turning off the power for a few minutes and then turning it back on. If the issue continues, contact Whirlpool customer service for further assistance.

How to Fix Error Code 44958 on Your Whirlpool Dishwasher

Step 1: Unplug the Dishwasher

The first step in resolving this issue is to unplug your Whirlpool dishwasher. This ensures your safety while working on the appliance and prevents any further damage.

Step 2: Inspect the Control Panel

Carefully examine the control panel for any visible signs of damage or foreign objects. Sometimes, small particles or debris can get lodged under the buttons, causing them to stick. If you discover any obstructions, gently remove them using a toothpick or a soft cloth.

Step 3: Check for Moisture Buildup

Moisture can often be the culprit behind a stuck key on the user interface. Inspect the control panel for any signs of water damage or excessive moisture. If you notice any, use a clean cloth to wipe away the moisture, ensuring that the buttons are dry and free from any leftover residue.

Step 4: Press and Hold the Cancel Button

To reset the dishwasher and clear the error code 44958, press and hold the “Cancel” button for a few seconds. This action will simulate a power reset and may resolve the stuck key issue.

Step 5: Plug in the Dishwasher and Test

After completing the above steps, plug your Whirlpool dishwasher back in and test if the error code 44958 has been resolved. Run a short cycle or select any other function on the control panel to check if the buttons are functioning correctly.

Note: If the error message persists even after attempting these troubleshooting steps, it is advisable to consult a professional technician. They will be able to diagnose the issue accurately and provide the necessary repair solutions.

So, next time you encounter error code 44958 on your Whirlpool dishwasher, don’t panic! Follow these steps to fix the stuck key on the user interface and get your appliance back up and running smoothly.

• Step 1: Unplug the dishwasher
• Step 2: Inspect the control panel
• Step 3: Check for moisture buildup
• Step 4: Press and hold the cancel button
• Step 5: Plug in the dishwasher and test