Home>Articles>How To Fix The Error Code 45172 For Whirlpool Dishwasher
Articles
How To Fix The Error Code 45172 For Whirlpool Dishwasher
Modified: December 14, 2023
Learn how to fix the error code 45172 for your Whirlpool dishwasher with these helpful articles.
(Many of the links in this article redirect to a specific reviewed product. Your purchase of these products through affiliate links helps to generate commission for Storables.com, at no extra cost. Learn more)
Is your Whirlpool dishwasher displaying the error code 45172? Don’t panic! We’re here to help you fix this water heating issue.
Whirlpool dishwashers are known for their reliability and efficiency, but occasionally, you may encounter an error code 45172. This error code indicates a problem with the water heating system in your dishwasher. Without proper water heating, your dishes may not come out as clean and sanitized as they should be. Luckily, there are a few troubleshooting steps you can take to resolve this issue.
Key Takeaways:
- Ensure your Whirlpool dishwasher’s water temperature is at least 120°F to fix error code 45172. If that doesn’t work, inspect the heating element and clean the filters to restore optimal performance.
- If troubleshooting steps don’t resolve error code 45172, contact Whirlpool customer service or a certified technician for professional assistance. Remember, a simple reset can also sometimes clear the error code.
How to Fix Error Code 45172 on Your Whirlpool Dishwasher:
- Check the water temperature: Ensure that the temperature of your hot water supply is at least 120°F (49°C). If the water is not hot enough, increase the temperature on your water heater and give it some time to heat up. This simple step can often resolve the 45172 error code.
- Inspect the heating element: The heating element in your dishwasher is responsible for heating the water during the wash cycle. If it is faulty or damaged, it can trigger the 45172 error code. To check the heating element, you’ll need to access the dishwasher’s interior. Start by turning off the power to your dishwasher and removing the lower dish rack. Look for any signs of damage or burn marks on the heating element. If you notice any issues, it’s time to replace the heating element with a new one.
- Clean the filters: Clogged filters can restrict the water flow and interfere with the proper functioning of the dishwasher. Remove the filters from the bottom of your dishwasher and rinse them under running water to remove any debris or food particles. Once clean, reinstall the filters and run a test cycle to see if this resolves the error code.
- Check the wiring connections: Loose or damaged wiring connections can disrupt the power supply to the heating element, leading to the 45172 error code. Make sure all the wiring connections related to the heating system are secure and intact. If you spot any damaged wires, they should be repaired or replaced by a qualified technician.
- Reset the dishwasher: Sometimes, a simple reset can fix the error code 45172. Disconnect the dishwasher from the power source for a few minutes, then plug it back in. This action can clear any temporary glitches that may be causing the problem.
If none of the above steps resolve the error code 45172, it is recommended to contact Whirlpool customer service or schedule a service call with a certified technician. They will be able to diagnose the issue and provide a suitable solution.
Remember, errors like the 45172 code are common in appliances, and with a little troubleshooting, you can often fix them yourself. By following these steps, you’ll have your Whirlpool dishwasher back to its optimal performance, ensuring squeaky clean dishes every time!
Check the dishwasher’s manual for the error code 45172. It could indicate a problem with the water supply or inlet valve. Try cleaning the inlet valve and ensuring proper water flow to fix the issue. If the problem persists, consider contacting a professional technician for further assistance.
Frequently Asked Questions about How To Fix The Error Code 45172 For Whirlpool Dishwasher
1. Check if the water supply to the dishwasher is turned on and the water pressure is adequate.
2. Ensure that the water inlet hose is not kinked or blocked.
3. Clean the water inlet valve filter, which can sometimes get clogged with debris.
4. Make sure that the water tap is fully open and not partially closed.
5. If the issue persists, it is recommended to contact a professional technician for further assistance.
1. Turn off the dishwasher and unplug it from the power source.
2. Locate the water inlet valve, which is usually behind the dishwasher.
3. Remove the water inlet hose from the valve.
4. Look for the filter screen inside the valve and gently remove it.
5. Rinse the filter screen under running water to remove any debris or sediment.
6. Once clean, reinsert the filter screen into the water inlet valve.
7. Reconnect the water inlet hose and ensure it is securely attached.
8. Plug the dishwasher back in and run a test cycle to check if the error code is resolved.
1. Press the “Cancel” button on the dishwasher’s control panel to clear any ongoing cycles.
2. Turn off the dishwasher and unplug it from the power source.
3. Wait for approximately 10 minutes to allow the dishwasher to reset.
4. Plug the dishwasher back in and turn it on.
5. Run a test cycle to see if the error code has been cleared.
If the error code reappears after the reset, it is recommended to contact a professional technician for further assistance.
Was this page helpful?
At Storables.com, we guarantee accurate and reliable information. Our content, validated by Expert Board Contributors, is crafted following stringent Editorial Policies. We're committed to providing you with well-researched, expert-backed insights for all your informational needs.
0 thoughts on “How To Fix The Error Code 45172 For Whirlpool Dishwasher”