Home>Articles>How To Fix The Error Code 6-4 For Maytag Dishwasher
Articles
How To Fix The Error Code 6-4 For Maytag Dishwasher
Modified: February 28, 2024
Learn how to fix the Error Code 6-4 on your Maytag dishwasher with these helpful articles.
(Many of the links in this article redirect to a specific reviewed product. Your purchase of these products through affiliate links helps to generate commission for Storables.com, at no extra cost. Learn more)
The Dreaded Error Code 6-4: Float Switch Open
Picture this: you load up your Maytag dishwasher with a sink full of dirty dishes, press the start button, and eagerly wait for the magic to happen. But instead of the soothing sound of water swooshing around, you’re greeted with an error code on the display – 6-4: Float Switch Open. What does it mean? How do you fix it? Don’t panic! As an expert in all things Maytag dishwasher, I’m here to guide you through this frustrating situation.
So, let’s get down to business. The error code 6-4 on your Maytag dishwasher indicates that there is a problem with the float switch. The float switch is a nifty little device that’s responsible for monitoring the water level in the dishwasher. When it detects that the water has reached the appropriate level, it signals the dishwasher to stop filling with water. But when the switch is open, it means that the dishwasher isn’t receiving the signal, and as a result, it refuses to start.
Key Takeaways:
- The error code 6-4 on your Maytag dishwasher indicates a problem with the float switch, which can be fixed by cleaning the switch and float area, and testing its functionality. Always prioritize safety and seek professional help if needed.
- To prevent the error code 6-4 from occurring in the future, regularly maintain the water inlet valve, ensure a clean water supply, and avoid overloading the dishwasher. Address any potential issues promptly to prevent further damage.
How to Fix Error Code 6-4
Now that we know what the error code means, it’s time to roll up our sleeves and fix the issue. Here’s a step-by-step guide to get your Maytag dishwasher back up and running:
- Turn Off the Power: Safety first! Before you start tinkering with your dishwasher, make sure to turn off the power supply. You can either unplug the dishwasher or locate the circuit breaker and switch it off.
- Inspect the Float Switch: The float switch is usually located at the front or the side of the dishwasher tub near the bottom. Carefully remove the lower access panel to gain access to the switch. Check for any visible signs of damage or debris that might be interfering with its operation.
- Clean the Float Area: If you notice any gunk or debris around the float switch or in the float area, give it a good cleaning. It’s not uncommon for food particles or other objects to get stuck here, preventing the switch from functioning properly.
- Test the Float Switch: Once everything is clean and tidy, it’s time to put the switch to the test. Gently move the float up and down and listen for a clicking sound. If you hear a click, it means that the switch is closing and opening as it should. If there’s no clicking sound, it may be necessary to replace the float switch.
- Restart the Dishwasher: After you’ve completed all the necessary steps, it’s time to turn the power back on and restart your Maytag dishwasher. Hopefully, the error code 6-4 will be a thing of the past, and you’ll be able to enjoy clean, sparkling dishes once again!
Remember, if you’re unsure about any step or feel uncomfortable working on your dishwasher, it’s always best to seek professional help. Now that you’re armed with the knowledge of how to fix error code 6-4 on your Maytag dishwasher, you can confidently tackle this issue and get your kitchen chores back on track. Happy dishwashing!
Check the drain hose for any clogs or kinks, and ensure it is properly connected. Also, clean the filters and check for any debris in the dishwasher. If the issue persists, consider contacting a professional for further assistance.
Frequently Asked Questions about How To Fix The Error Code 6-4 For Maytag Dishwasher
1. Turn off the dishwasher and unplug it from the power source.
2. Check the water inlet valve for any visible signs of damage or obstructions.
3. Ensure that the water supply to the dishwasher is turned on and the water pressure is sufficient.
4. Clean the water inlet valve filter to remove any debris or sediment that could be causing the issue.
5. If the above steps don’t resolve the error, it is recommended to consult a professional technician for further assistance.
1. Regularly clean and maintain the water inlet valve and its filter to prevent any blockages from occurring.
2. Ensure that the water supply to the dishwasher is free from any debris or sediment that can clog the valve.
3. Use a water softener if your area has hard water, as mineral deposits can accumulate and affect the valve’s performance.
4. Avoid overloading the dishwasher, as this can put unnecessary strain on the water inlet valve and other components.
5. If you notice any signs of a potential issue, such as leaks or unusual noises, address them promptly to prevent further damage.
Was this page helpful?
At Storables.com, we guarantee accurate and reliable information. Our content, validated by Expert Board Contributors, is crafted following stringent Editorial Policies. We're committed to providing you with well-researched, expert-backed insights for all your informational needs.
0 thoughts on “How To Fix The Error Code 6-4 For Maytag Dishwasher”