What To Do If Electric Recliner Stops Working

(Many of the links in this article redirect to a specific reviewed product. Your purchase of these products through affiliate links helps to generate commission for Storables.com, at no extra cost. Learn more)

Check the Power Source

When your electric recliner suddenly stops working, the first step is to check the power source. This may seem obvious, but it's a crucial initial troubleshooting step. Start by ensuring that the recliner is securely plugged into a functioning power outlet. Sometimes, the plug can become loose due to regular use, which can interrupt the power supply to the recliner.

If the recliner is plugged in properly, the next thing to check is the power outlet itself. Plug another electronic device into the same outlet to verify if it is working. If the other device doesn't power on, the issue may lie with the outlet rather than the recliner. In such cases, you may need to reset the circuit breaker or replace the outlet to restore power.

In some instances, power surges or electrical issues can cause the recliner to stop working. To address this, consider plugging the recliner into a different outlet or using a surge protector to safeguard it from power fluctuations.

It's also important to inspect the power cord for any signs of damage, such as fraying or exposed wires. If any damage is detected, the power cord should be replaced to prevent potential electrical hazards and restore the recliner's functionality.

By thoroughly checking the power source, including the outlet, power cord, and potential power surges, you can effectively troubleshoot and resolve issues related to the electric recliner's power supply. This simple yet essential step can often rectify the problem and get your recliner back up and running without the need for further intervention.

Inspect the Remote Control

The remote control is a pivotal component of an electric recliner, providing convenient access to its various functions. When encountering issues with an electric recliner, inspecting the remote control is a crucial step in the troubleshooting process. Start by checking the batteries to ensure they are properly inserted and have an adequate charge. Over time, batteries can lose their power, leading to a decline in the remote's functionality. By replacing the batteries with fresh ones, you can eliminate this potential cause of the problem.

Next, examine the remote control for any visible damage or signs of wear and tear. Inspect the buttons to ensure they are responsive and not stuck or jammed. Dust and debris can accumulate over time, hindering the functionality of the buttons. Carefully clean the remote control using a soft, dry cloth to remove any buildup that may be impeding its operation.

In some cases, the remote control may require reprogramming to synchronize with the recliner. Refer to the manufacturer's instructions for the correct reprogramming procedure, as this can vary depending on the model and brand of the electric recliner. By following the reprogramming guidelines, you can reset the remote control and establish a seamless connection with the recliner, potentially resolving any operational issues.

If the remote control appears to be in good condition and the batteries are functioning correctly, consider testing it from different angles and distances to ensure that the signal is reaching the recliner. Sometimes, obstructions or interference can disrupt the transmission of signals, causing the recliner to be unresponsive to the remote control's commands.

By thoroughly inspecting the remote control and addressing any potential issues related to its functionality, you can effectively troubleshoot and resolve problems with the electric recliner. This meticulous approach can often pinpoint the root cause of the malfunction, allowing you to restore the seamless operation of the recliner and enjoy its comfort and convenience once again.

Examine the Wiring

When troubleshooting an electric recliner that has ceased to function, a critical step is to meticulously examine the wiring. The wiring system is integral to the recliner's electrical operation, and issues within this component can lead to malfunctions. Begin by carefully inspecting the power cord that connects the recliner to the power source. Look for any visible signs of damage, such as fraying, cuts, or exposed wires. If any damage is detected, it is imperative to address it promptly to prevent potential electrical hazards and restore the proper functionality of the recliner.

In addition to the power cord, it is essential to examine the internal wiring within the recliner itself. This may require accessing the underside or back of the recliner to gain visibility of the wiring connections. Look for loose or disconnected wires, as these can disrupt the flow of electricity and impede the recliner's operation. Gently wiggle the wires to ensure they are securely connected and not damaged. If any loose connections are found, carefully reattach them to their respective terminals, ensuring a snug and secure fit.

Furthermore, inspect the wiring for any signs of wear, corrosion, or overheating. Over time, the wiring may deteriorate due to regular use or environmental factors, potentially leading to electrical issues. Look for discoloration, melting, or burning marks, as these can indicate underlying problems within the wiring system. If any concerning signs are observed, it is advisable to seek professional assistance to assess and rectify the wiring issues effectively.

It is also important to check for any obstructions or entanglements within the wiring. Sometimes, foreign objects or debris can inadvertently become entwined with the wires, disrupting the electrical flow and causing the recliner to malfunction. Carefully untangle and remove any obstructions, ensuring that the wiring is free from impediments that could compromise its functionality.

By meticulously examining the wiring of the electric recliner, you can identify and address potential issues that may be causing the malfunction. This proactive approach allows for the thorough assessment of the recliner's electrical components, enabling you to rectify any wiring-related issues and restore the seamless operation of the recliner.

Check the power source and make sure it’s plugged in. If it’s still not working, look for any visible damage to the power cord or switch. If everything looks okay, contact the manufacturer for further assistance.

Look for Obstructions

When an electric recliner experiences a sudden malfunction, it's essential to consider the possibility of obstructions within the mechanism. Obstructions can impede the smooth operation of the recliner, causing it to become unresponsive or malfunction. Therefore, conducting a thorough inspection for obstructions is a crucial step in the troubleshooting process.

Begin by carefully examining the area surrounding the recliner, paying close attention to any potential obstructions that may be hindering its movement. Common obstructions include loose objects, such as small toys, books, or other items that may have inadvertently fallen and become lodged beneath or around the recliner. These objects can obstruct the recliner's mechanical components, preventing it from functioning properly.

In addition to visible obstructions, it's important to check for any hidden impediments that may be affecting the recliner's operation. This includes inspecting the underside and back of the recliner for any foreign objects or debris that may have become entangled within the mechanism. Dust, pet hair, or fabric remnants can accumulate over time, potentially causing obstructions that interfere with the recliner's movement.

Furthermore, examine the recliner's mechanical components, such as the hinges, tracks, and motorized parts, for any signs of obstruction or blockage. Dust and debris can accumulate within these components, impeding their smooth functioning and causing the recliner to stop working as intended. Carefully clean and remove any accumulated debris to ensure that the mechanical components can operate freely without obstruction.

It's also important to inspect the recliner's upholstery and padding for any irregularities that may be affecting its movement. Loose fabric, tangled threads, or displaced padding can interfere with the recliner's mechanisms, leading to operational issues. Smooth out any wrinkles or folds in the upholstery and ensure that the padding is properly aligned to prevent any potential obstructions.

By meticulously looking for obstructions within and around the electric recliner, you can effectively identify and address any impediments that may be causing the malfunction. This diligent approach allows for the comprehensive assessment and removal of obstructions, enabling the recliner to regain its smooth and seamless operation without the presence of any hindrances.

Contact Customer Support

In the event that the troubleshooting steps outlined above do not resolve the issues with your electric recliner, reaching out to the manufacturer's customer support is the next recommended course of action. Customer support teams are equipped with the expertise and resources to provide tailored assistance and guidance specific to your recliner model and its technical specifications.

Initiating contact with customer support can be done through various channels, including phone, email, or online chat, depending on the manufacturer's available support options. When reaching out, it is beneficial to have essential information readily available, such as the recliner's model number, purchase date, and a detailed description of the issues encountered. This information enables the customer support team to better understand the nature of the problem and provide targeted assistance.

During the interaction with customer support, it is important to communicate the steps already taken to troubleshoot the recliner, including the outcomes of each step. This information allows the support team to assess the situation comprehensively and offer relevant recommendations or solutions. Additionally, if the recliner is under warranty, it is advisable to have the warranty details on hand to facilitate a smoother resolution process.

Customer support representatives are adept at diagnosing complex technical issues and can provide specific instructions for further troubleshooting, if applicable. In some cases, they may arrange for a technician to inspect the recliner in person or facilitate the repair process through authorized service centers. This personalized assistance ensures that the underlying cause of the malfunction is accurately identified and addressed, leading to a satisfactory resolution.

Moreover, customer support interactions offer an opportunity to seek clarification on the recliner's maintenance requirements, operational nuances, and potential software updates or recalls. This valuable information can contribute to the long-term care and optimal performance of the electric recliner, enhancing its durability and user experience.

By engaging with customer support, you can leverage the manufacturer's expertise and resources to effectively address the issues with your electric recliner. This proactive approach not only facilitates the resolution of immediate concerns but also fosters a deeper understanding of the recliner's functionality and maintenance, empowering you to make informed decisions regarding its care and usage.

In summary, contacting customer support is a pivotal step in the troubleshooting process, offering personalized assistance, technical insights, and potential resolutions tailored to your electric recliner's specific requirements.