How To Get Sand Out Of Hot Tub

(Many of the links in this article redirect to a specific reviewed product. Your purchase of these products through affiliate links helps to generate commission for Storables.com, at no extra cost. Learn more)

Introduction

Welcome to the wonderful world of hot tub relaxation! There’s nothing quite like sinking into a warm, bubbling hot tub after a long day. However, this blissful experience can be disrupted when you find sand in your hot tub. Sand can enter your hot tub from various sources, such as dirty swimsuits, beach towels, or even natural debris. While it may seem like a minor nuisance, sand in your hot tub can clog the filter, scratch the surface, and create an uncomfortable experience for you and your guests.

But fear not! Getting sand out of your hot tub is a manageable task that can be easily accomplished with the right approach. In this guide, we’ll walk you through the step-by-step process of removing sand from your hot tub and provide valuable tips for preventing future sand build-up. By following these instructions, you’ll be able to maintain a pristine hot tub environment, ensuring that every soak is as enjoyable and rejuvenating as it should be.

Step 1: Drain the Hot Tub

The first step in removing sand from your hot tub is to drain the water completely. Before draining, ensure that the hot tub’s power supply is turned off to prevent any mishaps. Refer to your hot tub’s manual for specific instructions on safely draining the water. Typically, this involves attaching a hose to the drainage valve and directing the water to an appropriate outdoor location, such as a lawn or garden area.

Once the water has been drained, take the time to inspect the hot tub’s interior for any accumulated sand. Use a soft-bristled brush or a damp cloth to gently remove any visible sand particles from the surfaces. Pay attention to the nooks and crannies where sand may have settled, ensuring that the entire interior is free from debris.

After cleaning the interior, it’s a good idea to rinse the hot tub with a hose to remove any remaining sand or residue. This thorough rinsing will prepare the hot tub for the next steps in the sand removal process. Once the interior is clean and free of sand, you’re ready to proceed to the next step in restoring your hot tub to its pristine condition.

Step 2: Vacuum the Sand

With the hot tub drained and the interior surfaces cleaned, it’s time to focus on removing the remaining sand particles. Using a wet/dry vacuum specifically designed for hot tubs or a shop vacuum with appropriate attachments, carefully vacuum the entire interior of the hot tub. Pay close attention to areas where sand tends to accumulate, such as the bottom of the tub, around the seats, and along the waterline.

When vacuuming, move the nozzle methodically across the surfaces, ensuring that you cover the entire area comprehensively. Take your time to effectively remove as much sand as possible, as thorough vacuuming is crucial for achieving optimal results. If the vacuum has adjustable suction power, consider using a lower setting to prevent any damage to the hot tub’s surfaces while effectively picking up the sand.

As you vacuum, periodically check the vacuum’s filter or collection bag to monitor the amount of sand being removed. Empty or clean the filter as needed to maintain the vacuum’s suction power and efficiency. Continue vacuuming until you are confident that the majority of the sand has been successfully extracted from the hot tub.

Once the vacuuming process is complete, visually inspect the hot tub’s interior to ensure that no significant sand residue remains. Any remaining sand particles should be removed manually using a soft cloth or brush, ensuring that the surfaces are completely free of debris. With the sand effectively vacuumed and removed, you’re ready to proceed to the next step in the restoration process.

Step 3: Clean the Filter

The hot tub’s filter plays a critical role in maintaining water clarity and removing impurities, including sand particles. Over time, the filter can become clogged with sand and debris, compromising its effectiveness. To ensure optimal filtration and prevent sand from re-entering the hot tub, it’s essential to thoroughly clean or replace the filter as part of the sand removal process.

Start by locating the hot tub’s filter housing, which is typically situated near the access panel. Depending on the type of filter your hot tub uses, such as cartridge, sand, or diatomaceous earth (DE) filter, the cleaning process may vary. Consult your hot tub’s manual for specific instructions on accessing and maintaining the filter.

If your hot tub is equipped with a cartridge filter, carefully remove the cartridge and inspect it for any signs of sand accumulation or damage. Rinse the cartridge thoroughly with a hose to dislodge and remove trapped sand particles. For a deeper clean, consider soaking the cartridge in a filter cleaning solution to dissolve oils, debris, and stubborn contaminants. After cleaning, allow the cartridge to dry completely before reinstalling it in the filter housing.

For hot tubs with sand or DE filters, refer to the manufacturer’s guidelines for proper maintenance and cleaning procedures. This may involve backwashing the filter to remove trapped sand and debris, or in the case of DE filters, disassembling the filter grid for thorough cleaning.

Inspect the filter housing and the surrounding area for any residual sand or debris, and remove it using a soft brush or cloth. Once the filter and its housing are clean and free of sand, reinstall the filter according to the manufacturer’s instructions, ensuring a secure and proper fit.

Regular maintenance of the filter, including periodic cleaning and replacement as needed, is essential for preventing sand build-up and maintaining the hot tub’s water quality. With the filter cleaned and restored to optimal functionality, you’re one step closer to enjoying a sand-free hot tub experience.

To get sand out of a hot tub, use a fine mesh skimmer to scoop out as much sand as possible. Then, vacuum the remaining sand using a wet/dry vacuum with a fine filter. Finally, clean the filter to remove any remaining sand particles.

Step 4: Refill the Hot Tub

With the hot tub interior thoroughly cleaned and the filter maintained, it’s time to refill the hot tub with fresh, clean water. Before refilling, take a moment to inspect the hot tub’s exterior and surrounding area for any residual sand or debris. Wipe down the exterior surfaces with a damp cloth to ensure that the hot tub is free from any remaining contaminants.

When refilling the hot tub, it’s important to use a clean water source to prevent introducing additional impurities. If your home is equipped with a water softener, bypass it when filling the hot tub to avoid adding excess minerals to the water. Additionally, consider using a fine-mesh filter or a pre-filter attachment on the hose to further purify the water as it enters the hot tub.

As the hot tub fills, monitor the water level to ensure that it reaches the appropriate depth for optimal functionality. Take this opportunity to add the necessary water care products, such as chlorine or bromine, as well as a water clarifier to help maintain water clarity and purity. Follow the manufacturer’s recommendations and dosage instructions for the specific products you use to treat the hot tub water.

Once the hot tub is filled to the desired level and the water care products have been added, turn on the hot tub’s circulation system to begin circulating and filtering the water. This will help distribute the water care products evenly and initiate the filtration process to maintain water clarity and cleanliness.

After the hot tub has been refilled, allow the water to circulate and filter for a sufficient period before testing and adjusting the water chemistry as needed. Regularly monitor the water quality and maintain the appropriate chemical balance to ensure a comfortable and hygienic hot tub experience.

With the hot tub refilled and the water quality optimized, you’re well on your way to enjoying a rejuvenating soak in a thoroughly cleaned and sand-free hot tub.

Step 5: Preventing Sand Build-Up

Preventing sand build-up in your hot tub can help you avoid the hassle of extensive cleaning and maintenance in the future. Implementing proactive measures to minimize the introduction of sand and debris into the hot tub can contribute to a consistently clean and enjoyable soaking experience.

• Shower Before Soaking: Encourage hot tub users to rinse off in a shower before entering the hot tub. This simple step can help remove sand, dirt, and other impurities from the body, reducing the likelihood of these particles entering the hot tub.
• Use Quality Accessories: Invest in high-quality hot tub accessories, such as durable and well-constructed swimsuits, towels, and water toys. Look for materials that are less likely to shed fibers or release sand particles, minimizing the risk of introducing debris into the hot tub.
• Regular Maintenance: Establish a routine maintenance schedule for your hot tub, including regular cleaning of the filter, monitoring water chemistry, and inspecting the hot tub for any signs of sand or debris accumulation. Consistent maintenance can help address potential issues before they escalate.
• Proper Landscaping: If your hot tub is located outdoors, consider the surrounding landscaping to minimize the introduction of sand and dirt into the hot tub. Utilize barriers such as fences, shrubbery, or windbreaks to reduce the impact of environmental debris.
• Footwear Awareness: Encourage hot tub users to remove their footwear before entering the hot tub area. Sand and dirt can easily be tracked into the hot tub vicinity on footwear, contributing to potential debris accumulation.

By incorporating these preventive measures into your hot tub care routine, you can significantly reduce the likelihood of sand build-up and maintain a cleaner and more inviting hot tub environment. Consistent attention to these practices will contribute to a more enjoyable and hassle-free hot tub experience for you and your guests.

Conclusion

Managing sand build-up in your hot tub is an essential aspect of hot tub maintenance, ensuring that your relaxation oasis remains clean, inviting, and free from debris. By following the step-by-step process outlined in this guide, you can effectively remove sand from your hot tub and establish preventive measures to minimize future build-up. From draining the hot tub to thoroughly cleaning the filter and refilling the tub with fresh water, each step plays a crucial role in restoring your hot tub to its optimal condition.

Remember that proactive maintenance and preventive practices, such as encouraging showering before soaking and investing in quality accessories, can contribute to a cleaner hot tub environment and reduce the likelihood of sand and debris entering the water. Consistent attention to these practices, along with regular maintenance and water care, will help you sustain a pristine hot tub experience for yourself and your guests.

As you embark on the journey of maintaining a sand-free hot tub, keep in mind that the effort you invest in proper care and cleaning will be rewarded with countless moments of relaxation and rejuvenation. With a well-maintained hot tub, you can look forward to many soothing soaks and enjoyable gatherings, knowing that your hot tub is a clean and inviting retreat.

Embrace the process of hot tub care and maintenance, and relish in the tranquil and revitalizing experiences that await you in your beautifully maintained and sand-free hot tub.