How To Fix The Error Code F35 For Maytag Washing Machine

(Many of the links in this article redirect to a specific reviewed product. Your purchase of these products through affiliate links helps to generate commission for Storables.com, at no extra cost. Learn more)

Is your Maytag washing machine displaying the F35 error code? Don’t panic!

As an expert in Maytag washing machines, I’m here to help you resolve this frustrating issue. The F35 error code typically indicates an analog pressure sensor error. But fear not, with a little bit of know-how, you can easily fix this problem and get your washing machine back to its optimal performance.

Understanding the F35 Error Code

Before diving into the solution, let’s first understand what the F35 error code signifies. In Maytag washing machines, the analog pressure sensor is responsible for monitoring and regulating the water level during the wash cycle. When it malfunctions, the washer displays the F35 error code on its control panel.

This error code indicates that the pressure sensor is experiencing some sort of issue, which prevents it from accurately detecting the water levels. As a result, your washing machine may not fill up with water properly or may show inconsistent water levels throughout the cycle.

Check the air pressure hose and air trap for any blockages or damage. Clean or replace as needed. If the issue persists, consider contacting a professional technician for further assistance.

How to Fix the F35 Error Code

Now that we know what the error code means, let’s get to the solution! Follow these steps to fix the F35 error code on your Maytag washing machine:

1. Unplug the washing machine: Safety first! Before attempting any repairs, make sure your washing machine is completely unplugged.
2. Remove the top panel: Most Maytag washing machines have a removable top panel. Look for screws or clips that secure it in place and carefully take it off.
3. Locate the analog pressure sensor: The sensor is usually situated near the top of the washing machine, next to the control board. It’s a small device with wires connected to it.
4. Clean the sensor: Gently disconnect the wires from the sensor and clean it using a soft cloth or brush. Over time, dust and debris can accumulate on the sensor, affecting its performance. Ensuring it’s free from any obstructions might resolve the F35 error code.
5. Check for loose connections: While you have the sensor disconnected, inspect the wire connections for any signs of damage or looseness. If you find any issues, fix or replace the wires accordingly.
6. Reassemble and test: Once the sensor is clean and the connections are secure, reattach everything in the reverse order. Put the top panel back on and plug your washing machine back in. Run a test cycle to confirm if the F35 error code has been resolved.

If you have followed these steps carefully, your Maytag washing machine should now be free from the F35 error code. However, if the problem persists, it might be best to seek professional assistance from a certified technician.

Remember, regular maintenance and cleaning can help prevent errors like the F35 code from occurring in the future. By keeping your washing machine in good condition, you can enjoy clean clothes without the worry of interruptions.

Now that you’re equipped with knowledge on resolving the F35 error code, go ahead and tackle this issue with confidence. Don’t let a simple error code disrupt your laundry routine!