Home>Articles>How To Fix The Error Code F35 For Whirlpool Washer

How To Fix The Error Code F35 For Whirlpool Washer How To Fix The Error Code F35 For Whirlpool Washer

Articles

How To Fix The Error Code F35 For Whirlpool Washer

Written by: Emma Thompson

Learn how to fix the error code F35 for your Whirlpool washer with our helpful articles. Find step-by-step instructions and troubleshooting tips.

(Many of the links in this article redirect to a specific reviewed product. Your purchase of these products through affiliate links helps to generate commission for Storables.com, at no extra cost. Learn more)

An Expert’s Guide to Fixing the F35 Error Code on Your Whirlpool Washer

Picture this: you’ve got a pile of laundry waiting to be washed, and when you finally load it into your trusty Whirlpool washer, you’re greeted with an unfamiliar error code: F35. Panic sets in as you wonder what this mysterious code means and how to fix it.

Well, fear not! As an expert in Whirlpool washers, I’m here to shed some light on the F35 error code and provide you with a step-by-step guide to resolve it. So, let’s dive in!

Key Takeaways:

  • Don’t let the F35 error code intimidate you! With a few simple steps, you can troubleshoot and resolve this issue on your Whirlpool washer, getting back to clean laundry in no time.
  • Prioritize safety and follow the expert guide to fix the F35 error code. If the issue persists, consider consulting a professional or reaching out to Whirlpool’s customer service for further assistance.

Understanding the F35 Error Code

The F35 error code on a Whirlpool washer is specifically related to the analog pressure sensor. This sensor plays a crucial role in monitoring and controlling the water level during a wash cycle. When it malfunctions, the washer may not be able to accurately detect the water level, leading to the F35 error code.

But fret not, as fixing this issue is possible with a few simple steps.

How to Fix the F35 Error Code

Here’s a step-by-step guide to help you fix the F35 error code on your Whirlpool washer:

  1. Step 1: Unplug the washer – Safety first! It’s essential to disconnect the power supply before attempting any repairs.
  2. Step 2: Access the pressure sensor – The analog pressure sensor is typically located inside the control panel. You’ll need to remove the panel to reach it. Refer to your washer’s user manual for specific instructions on accessing the control panel.
  3. Step 3: Check for loose connections – Once you’ve accessed the pressure sensor, carefully inspect the wiring connections. Ensure that all the wires are securely connected and free from any damage.
  4. Step 4: Clean the pressure sensor – Gently remove the pressure sensor from its housing and clean it thoroughly using compressed air or a soft brush. This will help remove any debris or dust that may be affecting its functionality.
  5. Step 5: Reassemble and test – Once the pressure sensor is clean and the wiring connections are secure, reassemble the control panel and plug in the washer. Run a test cycle to see if the F35 error code is resolved.

In most cases, following these steps should fix the F35 error code and get your Whirlpool washer back to its efficient self in no time. However, if the error persists, it may be necessary to replace the analog pressure sensor altogether. In such instances, it’s recommended to consult a professional or contact Whirlpool’s customer service for further assistance.

Check the air pressure hose for any blockages or kinks. Clean or replace the hose if necessary. Also, ensure the air trap is clear of any debris.

Don’t Let F35 Drag You Down

The F35 error code on your Whirlpool washer can be frustrating, but armed with this expert knowledge, you’re well-equipped to tackle it head-on. Remember, safety should always be your priority when dealing with any electrical appliance, so be sure to unplug your washer before attempting any repairs.

By following the step-by-step guide outlined above, you’ll be back to enjoying clean, fresh laundry in no time. So bid farewell to the F35 error code, and let your Whirlpool washer work its magic once again!

Frequently Asked Questions about How To Fix The Error Code F35 For Whirlpool Washer

What does the error code F35 on my Whirlpool washer mean?

The error code F35 on your Whirlpool washer typically indicates a malfunction with the pressure sensor or the analog pressure switch. This error code is related to the water level or water pressure in your washer.

To fix the F35 error code on your Whirlpool washer, you can try the following steps:

1. First, turn off and unplug the washer from the power source.
2. Check the pressure hose connected to the pressure switch for any clogs, kinks, or damage. Clear any blockages or replace the hose if necessary.
3. Inspect the pressure sensor and analog pressure switch for any signs of damage. If they appear to be faulty, consider replacing them.
4. Clean the air trap and ensure it is free from any debris.
5. Make sure the washer is level and stable. Adjust the feet if needed.
6. Plug the washer back in and run a test cycle to check if the error code persists.

If these steps do not resolve the issue, it is recommended to contact a professional technician or Whirlpool customer support for further assistance.

Can I fix the F35 error code myself, or do I need to call a professional?

While it is possible to fix the F35 error code on your Whirlpool washer yourself, it is recommended to have some knowledge of appliance repair. If you feel comfortable troubleshooting and handling electrical components, you can attempt the suggested fixes mentioned earlier. However, if you are unsure or inexperienced with appliance repairs, it is best to call a professional technician to avoid any further damage.
How can I prevent the F35 error code from occurring again in the future?

To prevent the F35 error code from occurring again in the future, you can take the following preventive measures:

1. Regularly clean the pressure hose and air trap to prevent blockages.
2. Avoid overloading the washer, as this can put excess strain on the pressure sensor.
3. Keep an eye on the water pressure in your home. If you notice any fluctuations or issues, contact a plumber to address them promptly.
4. Periodically check and ensure that the washer is level and stable on the floor.

By taking these preventive measures, you can potentially minimize the chances of encountering the F35 error code in the future.

Is there any quick troubleshooting I can do before calling for help?

Yes, before calling for professional help, you can try the following quick troubleshooting steps:

1. Turn off and unplug the washer from the power source.
2. Check the pressure hose for any clogs or damage and clear them if present.
3. Remove and clean the air trap to remove any debris.
4. Ensure the washer is level and stable on the floor.
5. Plug the washer back in and run a test cycle to see if the error code remains.

If the error code persists after these steps, it is advisable to contact a professional technician or Whirlpool customer support for further assistance.

Was this page helpful?

At Storables.com, we guarantee accurate and reliable information. Our content, validated by Expert Board Contributors, is crafted following stringent Editorial Policies. We're committed to providing you with well-researched, expert-backed insights for all your informational needs.

Comments

0 thoughts on “How To Fix The Error Code F35 For Whirlpool Washer

Leave a Comment

Your email address will not be published. Required fields are marked *

Menu