How To Program An ONN Universal Remote

(Many of the links in this article redirect to a specific reviewed product. Your purchase of these products through affiliate links helps to generate commission for Storables.com, at no extra cost. Learn more)

Introduction

Welcome to the world of home entertainment systems, where the possibilities for enjoying your favorite movies, TV shows, music, and more are endless. Whether you’re a tech-savvy enthusiast or just getting started, a crucial component of any home entertainment setup is a universal remote. A universal remote simplifies the operation of multiple devices by consolidating their controls into one convenient device.

In this article, we’ll guide you through the process of programming an ONN Universal Remote. Whether you have a television, DVD player, audio receiver, or cable/satellite box, we’ll show you how to program your ONN Universal Remote to control each of these devices seamlessly.

Before we dive in, it’s important to note that the steps we’ll outline here are specific to the ONN Universal Remote. While the overall programming process may be similar for other universal remotes, it’s always best to consult the manufacturer’s instructions for your specific device.

So, let’s get started and unlock the full potential of your home entertainment experience by programming your ONN Universal Remote!

Step 1: Gather the Necessary Information

Before diving into the programming process, it’s important to gather some key information about your devices. This information will make the programming process much smoother and quicker. Here’s what you’ll need:

1. Device Model Numbers: Take note of the model numbers for each device you want to program with the ONN Universal Remote. These model numbers can usually be found on the back or bottom of your devices.
2. User Manuals: Locate the user manuals for each device. These manuals will provide you with important information about the device, including any specific programming instructions for remote control compatibility.
3. Manufacturer Codes: Many universal remotes, including the ONN Universal Remote, require manufacturer codes to program specific devices. These codes allow the remote to communicate with your devices effectively. You can usually find a list of manufacturer codes in the ONN Universal Remote’s user manual or on the manufacturer’s website.

By gathering this information ahead of time, you’ll be well-equipped to move smoothly through the programming process without any hiccups.

Step 2: Prepare the Remote

Before you begin programming your ONN Universal Remote, it’s important to ensure that the remote is properly prepared. Here are the necessary steps to prepare your remote:

1. Insert Batteries: Open the battery compartment on the back of the remote and insert the required batteries. Ensure that the batteries are inserted correctly, following the polarity markings.
2. Power On the Devices: Make sure the devices you want to program with the ONN Universal Remote are powered on and in a ready state. This will ensure that the remote can successfully communicate with each device during the programming process.
3. Clear Obstructions: Clear any physical obstructions between the remote and the devices. This will ensure a strong and uninterrupted signal transmission during programming.

By properly preparing your remote, you’ll set yourself up for a successful programming experience. Now that the remote is ready, let’s move on to finding the programming code for your devices!

Step 3: Find the Programming Code

Now that your ONN Universal Remote is prepared, it’s time to find the programming code for each device you want to control. The programming code is a unique set of numbers that allows the remote to communicate with your devices. Here’s how to find the programming code:

1. Refer to the User Manual: Start by consulting the user manual that came with your ONN Universal Remote. Look for a section that provides a list of programming codes for different manufacturers and models of TVs, DVD players, audio receivers, and cable/satellite boxes. The manual may include a code search feature as well.
2. Online Resources: If you don’t have access to the user manual or cannot find the programming code you need, you can search online resources. Visit the ONN website, as they may have a database of programming codes available. You can also search for programming code databases or forums dedicated to universal remote programming.
3. Try Codes Sequentially: If you have a list of programming codes, but you’re not sure which one is applicable to your device, you can try the codes sequentially. Start with the first code on the list and follow the programming instructions provided by the ONN Universal Remote. If that code doesn’t work, try the next one, and so on, until you find the correct programming code.

Remember, finding the right programming code may require some trial and error, but with patience and persistence, you’ll be able to find the correct code for each device.

Once you have the programming codes ready, it’s time to proceed to the next step and program the ONN Universal Remote for your TV.

Step 4: Program the Remote for a TV

Programming your ONN Universal Remote to control your TV is a straightforward process. Follow these steps to successfully program the remote for your TV:

1. Turn on the TV: Ensure that your TV is powered on and in a ready state.
2. Locate the TV Button: On your ONN Universal Remote, locate the “TV” button. It is usually located at the top of the remote or near the control buttons.
3. Enter the Programming Mode: Press and hold the “TV” button until the LED indicator on the remote lights up. This indicates that the remote is in programming mode.
4. Enter the Programming Code: Using the numeric key pad on the remote, enter the programming code for your TV. Refer to the programming code list that you obtained in Step 3.
5. Test the Remote: After entering the programming code, press the “Power” button on the remote. If the TV turns off, it means the programming was successful. If not, repeat Steps 3 and 4 with a different programming code until you find the correct one.
6. Store the Programming Code: Once you have successfully programmed the remote, press the “TV” button again to store the programming code. The LED indicator will flash briefly, indicating that the code has been saved.

Congratulations! You have successfully programmed your ONN Universal Remote to control your TV. Now, let’s move on to the next step and program the remote for a DVD player.

When programming an ONN universal remote, make sure to have the correct code for your device handy. Follow the instructions in the manual carefully, and test the remote after programming to ensure it works properly.

Step 5: Program the Remote for a DVD Player

If you have a DVD player that you want to control with your ONN Universal Remote, you can easily program it following these steps:

1. Turn on the DVD Player: Ensure that your DVD player is powered on.
2. Locate the DVD Button: On your ONN Universal Remote, find the “DVD” button. It is typically located near the top of the remote or alongside other control buttons.
3. Press and Hold the DVD Button: Press and hold the “DVD” button until the LED indicator on the remote lights up. This signifies that the remote is in programming mode.
4. Enter the Programming Code: Using the numeric key pad on the remote, enter the programming code specific to your DVD player. Refer to the programming code list obtained in Step 3.
5. Test the Remote: Once you have entered the programming code, press the “Power” button on the remote. If the DVD player turns off, it indicates a successful programming. If not, repeat Steps 3 and 4 with a different programming code until you find the correct one.
6. Store the Programming Code: After successfully programming the remote, press the “DVD” button again to store the programming code. The LED indicator will blink briefly to confirm that the code has been saved.

Well done! You have successfully programmed your ONN Universal Remote to control your DVD player. Now, let’s move on to the next step and program the remote for an audio receiver.

Step 6: Program the Remote for an Audio Receiver

If you have an audio receiver as part of your home entertainment system, you can program your ONN Universal Remote to control it. Follow these steps to proceed:

1. Turn on the Audio Receiver: Make sure your audio receiver is powered on and ready to be programmed.
2. Locate the Audio Button: On your ONN Universal Remote, locate the “Audio” button. It is typically situated near the top of the remote or alongside other control buttons.
3. Press and Hold the Audio Button: Press and hold the “Audio” button until the LED indicator on the remote illuminates. This indicates that the remote is in programming mode.
4. Enter the Programming Code: Use the numeric keypad on the remote to enter the programming code specific to your audio receiver. Refer to the programming code list obtained in Step 3.
5. Test the Remote: Once you have entered the programming code, press the “Power” button on the remote. If the audio receiver turns off, it signifies a successful programming. If not, repeat Steps 3 and 4 with a different programming code until you find the correct one.
6. Store the Programming Code: After successfully programming the remote, press the “Audio” button again to store the programming code. The LED indicator will flash briefly, confirming that the code has been saved.

Fantastic! You have now programmed your ONN Universal Remote to control your audio receiver. Let’s move on to the final step and program the remote for a cable/satellite box.

Step 7: Program the Remote for a Cable/Satellite Box

If you have a cable/satellite box that you want to control with your ONN Universal Remote, you can easily program it by following these steps:

1. Turn on the Cable/Satellite Box: Ensure that your cable/satellite box is powered on and ready to be programmed.
2. Locate the Cable/Sat Button: On your ONN Universal Remote, find the “Cable” or “Sat” button. It is typically located near the top of the remote or alongside other control buttons.
3. Press and Hold the Cable/Sat Button: Press and hold the “Cable” or “Sat” button until the LED indicator on the remote lights up. This indicates that the remote is in programming mode.
4. Enter the Programming Code: Using the numeric key pad on the remote, enter the programming code specific to your cable/satellite box. Refer to the programming code list obtained in Step 3.
5. Test the Remote: Once you have entered the programming code, press the “Power” button on the remote. If the cable/satellite box turns off, it indicates a successful programming. If not, repeat Steps 3 and 4 with a different programming code until you find the correct one.
6. Store the Programming Code: After successfully programming the remote, press the “Cable” or “Sat” button again to store the programming code. The LED indicator will blink briefly to confirm that the code has been saved.

Great job! You have now programmed your ONN Universal Remote to control your cable/satellite box. Now, it’s time to test the remote and ensure that all the programming has been successful.

Step 8: Test the Remote

After programming your ONN Universal Remote for various devices, it’s important to test the remote to ensure that everything is working correctly. Follow these steps to test your remote:

1. Select the Device: Use the corresponding buttons on the remote (TV, DVD, Audio, Cable/Sat) to select the device you want to control.
2. Control the Device: Test the basic functions of the remote, such as changing channels, adjusting volume, navigating menus, and powering the device on and off. Make sure that the remote operates the device as expected.
3. Verify Additional Functions: If your remote has additional buttons or features specific to certain devices, such as DVD-specific controls or audio receiver modes, test these functions to ensure they work properly as well.
4. Make Adjustments if Needed: If you encounter any issues with the remote’s functionality, review the programming steps and ensure that you correctly entered the programming codes. If necessary, repeat the programming process for the problematic device.

If all the devices respond correctly to the commands from the ONN Universal Remote, congratulations! You have successfully programmed and tested your remote for your home entertainment system.

Remember, if you add new devices to your setup in the future, you can always refer back to this guide to program your ONN Universal Remote to control them as well.

Now sit back, relax, and enjoy the convenience and versatility of your newly programmed ONN Universal Remote as you navigate through your favorite entertainment!

Conclusion

In conclusion, programming an ONN Universal Remote to control your home entertainment system is a simple and rewarding process. By following the steps outlined in this guide, you can effortlessly program the remote to operate your TV, DVD player, audio receiver, and cable/satellite box.

Gathering the necessary information about your devices, preparing the remote, finding the programming codes, and successfully programming each device will give you full control over your home entertainment system with just one remote. The convenience of consolidating all your device controls into a single remote cannot be overstated.

Remember to refer to the user manuals and online resources for specific programming instructions and manufacturer codes. Take your time to enter the correct codes and test the remote’s functionality for each device to ensure a smooth and seamless experience.

With a properly programmed ONN Universal Remote, you can easily switch between devices, adjust volume levels, change channels, and navigate menus without the hassle of juggling multiple remotes.

So kick back, relax, and immerse yourself in a world of entertainment as you control all your devices with ease using your ONN Universal Remote. Whether you’re enjoying a movie night, listening to music, or catching up on your favorite TV shows, the convenience and simplicity of the ONN Universal Remote will enhance your home entertainment experience.

Now go ahead and take the first step in unlocking the full potential of your home entertainment system by programming your ONN Universal Remote. Happy programming!