How To Fix The Error Code 7-5 For Maytag Dishwasher

(Many of the links in this article redirect to a specific reviewed product. Your purchase of these products through affiliate links helps to generate commission for Storables.com, at no extra cost. Learn more)

Is your Maytag dishwasher displaying the error code 7-5?

Don’t worry, you’re not alone. Many dishwasher owners have encountered this frustrating error, where the diverter disk gets stuck and the control system detects that it hasn’t settled into a position within 90 seconds. But fear not, as a dishwasher expert, I’m here to guide you on how to fix this issue in a few simple steps.

Understanding the Error Code 7-5

When your Maytag dishwasher shows the error code 7-5, it means that the diverter disk, a critical component responsible for directing water flow in the dishwasher, has encountered a problem. The control system of the dishwasher has detected that the disk failed to settle into its intended position within 90 seconds, resulting in an error.

Tip: To fix error code 7-5 on a Maytag dishwasher, try resetting the appliance by turning off the power for a few minutes. If the error persists, it may indicate a problem with the door latch or control board, and professional service may be needed.

How to Fix the Error Code 7-5

Follow these steps to resolve the error code 7-5 on your Maytag dishwasher:

1. Start by turning off the dishwasher: Before attempting any troubleshooting, ensure that the dishwasher is turned off and disconnected from the power source. Safety first!
2. Inspect the diverter disk: Remove the lower spray arm and locate the diverter disk. Check if it is obstructed by any debris or food particles. If so, gently clean it using a soft brush or cloth.
3. Test the diverter motor: The diverter motor is a vital component responsible for moving the diverter disk. Use a multimeter to verify if the motor is functioning correctly. If not, it may require replacement. Consult a professional technician if needed.
4. Check the motorized diverter valve: This valve helps control the direction of water flow. Make sure it moves freely and isn’t stuck. If it’s stuck, try applying a small amount of lubricant to loosen it up.
5. Inspect the diverter seals: The diverter seals ensure a watertight connection. Examine them for any signs of damage or wear. If needed, replace the seals to ensure proper functioning.
6. Restart the dishwasher: Once you have checked and resolved any issues with the diverter disk, seals, motor, or valve, plug the dishwasher back in and restart it. Hopefully, the error code 7-5 will no longer appear, and your dishwasher will operate smoothly once again.

If you’ve followed these steps and the error code 7-5 persists, it’s advisable to contact a professional technician or the Maytag customer service for further assistance. They will have the necessary expertise to diagnose and fix the problem.

Remember, dishwasher errors can be frustrating, but with a methodical approach and a bit of troubleshooting, you can often resolve them without the need for expensive repairs or replacements. Happy dishwashing!