How To Fix The Error Code C1 For GE Dishwasher

(Many of the links in this article redirect to a specific reviewed product. Your purchase of these products through affiliate links helps to generate commission for Storables.com, at no extra cost. Learn more)

Are you facing an Error Code C1 with your GE Dishwasher? Don’t worry, we’ve got you covered!

Is your dishwasher taking too much time to pump out the water? If so, you might be encountering the Error Code C1 on your GE dishwasher. But fear not, because in this blog post, we will walk you through everything you need to know about fixing this issue.

The Error Code C1 on a GE dishwasher indicates a partial restriction in the drainage system. This means that the dishwasher is struggling to pump out the water efficiently, leading to longer cycles and potentially incomplete washing.

So, let’s dive into the solution!

Fixing Error Code C1

Step 1: Start by turning off the dishwasher and ensuring it is unplugged from the power source. Safety first!

Step 2: Locate the dishwasher’s drain filter. This can usually be found at the bottom of the dishwasher, underneath the lower spray arm. Consult your dishwasher’s user manual for the exact location.

Step 3: Remove the drain filter carefully. It might be held in place by screws or clips, so take your time to release it gently.

Step 4: Inspect the drain filter for any debris, such as food particles or other clogs. Use a brush or toothbrush to remove any obstructions carefully. It’s important to ensure the filter is completely clean and free from any debris.

Step 5: After cleaning the drain filter, reattach it securely in its original position. Make sure it is properly aligned and fastened.

Step 6: Once the drain filter is back in place, plug your dishwasher back into the power source. Turn it on and run a test cycle to check if the Error Code C1 has disappeared.

If the error code persists, it is advisable to contact a professional technician to troubleshoot and address the issue further.

Check the power supply and make sure the dishwasher is getting enough voltage. Reset the dishwasher by turning off the power for a few minutes and then turning it back on. If the error persists, consult the user manual or contact GE customer support for further assistance.

Preventing Future Occurrences

To avoid encountering Error Code C1 or similar drainage issues in the future, it’s important to take a few preventive measures:

• Regularly clean the drain filter, ideally on a monthly basis, to prevent any accumulation of debris.
• Scrape off excess food from your dishes before placing them in the dishwasher to prevent clogs.
• Ensure that items such as small utensils or plastics are not blocking the dishwasher’s drain.
• Use a suitable dishwasher detergent and follow the manufacturer’s guidelines for optimal performance.

By following these simple steps and practicing regular maintenance, you can keep your GE dishwasher running smoothly and prevent the inconvenience of encountering an Error Code C1.

We hope this guide helped you troubleshoot and fix the Error Code C1 on your GE dishwasher. Remember, if the problem persists or if you feel uncomfortable performing the steps yourself, it’s always best to seek professional assistance. Happy dishwashing!