How To Fix The Error Code F14 For Whirlpool Washer

(Many of the links in this article redirect to a specific reviewed product. Your purchase of these products through affiliate links helps to generate commission for Storables.com, at no extra cost. Learn more)

Oh no, F14: EEPROM Error on Your Control Board? Here’s How to Fix It!

Is your trusty Whirlpool washer suddenly flashing the dreaded F14 error code? Don’t panic! While it can be frustrating to encounter an error message on your washing machine, we’re here to help. As experts in appliance troubleshooting, we’ll guide you through fixing the F14: EEPROM error on your control board. So, let’s dive right in and get your washer back up and running smoothly!

But first, let’s understand what the F14 error code signifies. In Whirlpool washers, F14 is an EEPROM error, which stands for “Electrically Erasable Programmable Read-Only Memory error.” Essentially, it indicates a communication problem between the central control unit (CCU) and the EEPROM on the control board. This miscommunication can occur due to various factors, such as power surges, loose connections, or a faulty control board.

So, How Can You Fix the F14 Error Code? Let’s Find Out!

1. Power Cycle the Washer: First, let’s start with a simple and often effective solution – power cycling. Turn off the washer, unplug it from the power source, and wait for a couple of minutes. Then, plug it back in and power it on. This action can sometimes reset the control board and resolve minor communication glitches.

2. Check the Connections: Loose connections can interrupt the smooth flow of data between the CCU and the control board, triggering the F14 error. Ensure that all the wiring connections are secure and tight. Pay particular attention to the wiring harness between the CCU and control board. If you find any loose or damaged wires, fix or replace them accordingly.

3. Conduct a Control Board Reset: The next step involves resetting the control board. Locate the control board, which is usually behind the top panel or in the rear of the washer. Unplug the washer, remove the necessary panels to access the control board, and locate the small reset button (usually labeled “Reset” or “Restart”). Press and hold the reset button for about 10-15 seconds before releasing it. Then, reassemble the panels and power on the washer to see if the F14 error persists.

4. Replace the Control Board: If the above solutions fail to rectify the F14 error, it may indicate a faulty control board. In such cases, it is advisable to seek professional assistance or contact Whirlpool’s customer support directly. A qualified technician will be able to diagnose the issue accurately and replace the control board if necessary.

Check the water inlet hoses for kinks or blockages, and ensure they are properly connected. Also, make sure the water supply is turned on and the water pressure is adequate. If the issue persists, consider contacting a professional technician for further assistance.

In Conclusion

Dealing with the F14: EEPROM error on your Whirlpool washer can seem daunting, but with the right steps, it’s usually fixable. By power cycling your washer, checking connections, conducting a control board reset, or replacing the control board if necessary, you can tackle the F14 error code with confidence. Remember, safety should always come first when troubleshooting electrical appliances, so if you’re unsure or uncomfortable with any step, call in a professional. Soon enough, you’ll have your Whirlpool washer back in action, ready to tackle that next load of laundry!