How To Fix The Error Code F27 For Whirlpool Dryer

(Many of the links in this article redirect to a specific reviewed product. Your purchase of these products through affiliate links helps to generate commission for Storables.com, at no extra cost. Learn more)

Is your Whirlpool dryer displaying the F27 error code? Here’s what you need to know!

As an expert in dryer troubleshooting, I understand how frustrating it can be when an error code shows up on your Whirlpool appliance. Today, we’re going to tackle the infamous F27 error code, specifically related to the moisture sensor being open. But fret not! I’m here to guide you through the process of fixing this issue and getting your dryer up and running smoothly once again.

Understanding the F27 Error Code

The F27 error code on a Whirlpool dryer signifies that the moisture sensor circuit is open. Your dryer’s moisture sensor plays a crucial role in determining when your clothes are dry enough to be taken out. When this sensor is open or not functioning properly, it can prevent your dryer from working as intended.

But fear not, the fix for this issue is not as complex as it might seem. By following a few simple steps, you can resolve the F27 error code and have your dryer back in operation in no time.

Check the wiring connections between the motor control board and the main control board. If any connections are loose or damaged, reseat or replace them to fix the F27 error code on your Whirlpool dryer.

How to Fix the F27 Error Code

1. Step 1: Start by unplugging your dryer from the power outlet for safety purposes.
2. Step 2: Open the dryer door and locate the moisture sensor. It is usually found near the front lint screen or on the inside front wall of the dryer drum.
3. Step 3: Carefully disconnect the moisture sensor wiring harness from the control board. Ensure you handle the connectors gently to avoid any damage.
4. Step 4: Use a multimeter to test the sensor for continuity. Set your multimeter to the Ohms setting and touch each lead of the multimeter to the sensor terminals. If you get a reading of infinity or an open circuit, then the sensor is indeed open and needs to be replaced.
5. Step 5: If the moisture sensor is indeed open, it’s time to replace it. Locate the model number of your Whirlpool dryer and order the appropriate replacement part. You can find the model number in the user manual or by checking the back of the dryer.
6. Step 6: Once you have the replacement moisture sensor, reconnect the wiring harness to the control board and install the new sensor in its designated location. Ensure the connections are secure and avoid any excessive clamping or twisting of the wiring.
7. Step 7: Finally, plug your dryer back into the power outlet and test it to see if the F27 error code has been eliminated. Run a short drying cycle and keep an eye out for any further error codes or malfunctions.

By carefully following these steps, you should be able to fix the F27 error code on your Whirlpool dryer and restore its functionality. However, if you encounter any difficulties or have concerns about the process, it’s always recommended to consult a professional technician for assistance.

Remember, proper maintenance and prompt troubleshooting are essential to keep your appliances running smoothly. By promptly addressing error codes like F27, you can prevent larger issues down the line and extend the lifespan of your Whirlpool dryer.

So don’t let the F27 error code dampen your spirits! With a little bit of know-how and determination, you’ll have your dryer back to its efficient, clothes-drying ways in no time.