How To Fix The Error Code F31 For Whirlpool Oven & Range

(Many of the links in this article redirect to a specific reviewed product. Your purchase of these products through affiliate links helps to generate commission for Storables.com, at no extra cost. Learn more)

Is your Whirlpool oven or range displaying the F31 error code?

If you’re seeing the F31 error code on your Whirlpool oven or range, don’t worry – we’re here to help! As an expert on the subject, I’ll explain what the F31 error code means and guide you through the steps to fix it.

Understanding the F31 Error Code

The F31 error code is indicative of a “Shorted probe connection.” This error occurs when there is an issue with the connectivity between the temperature sensor probe and the control board of your oven or range. The temperature sensor probe is responsible for monitoring the internal temperature of the oven and relaying that information to the control board.

How to Fix the F31 Error Code

To resolve the F31 error code, follow these simple steps:

1. Disconnect the power: To ensure your safety, always disconnect the power supply before attempting any troubleshooting or repairs on your oven or range.
2. Access the temperature sensor probe: Depending on the model of your Whirlpool oven or range, you may need to remove the back panel or open the oven door to access the temperature sensor probe.
3. Check for loose or damaged connections: Carefully inspect the wires and connections leading to the temperature sensor probe. Look for any signs of damage or looseness. If you find any problems, gently tighten the connections or replace the damaged wires.
4. Test the temperature sensor probe: Using a multimeter set to the resistance (ohms) setting, test the temperature sensor probe by placing the multimeter probes on the sensor’s connector terminals. The resistance reading should be within the manufacturer’s specified range. If the reading is too high or too low, you may need to replace the temperature sensor probe.
5. Reassemble and restore power: Once you have checked and fixed any issues with the temperature sensor probe, reassemble the oven or range and reconnect the power supply.

If the F31 error code persists after following these steps, it may indicate a more complex issue with the control board or wiring. In such cases, it is best to consult a professional technician or reach out to Whirlpool customer support for further assistance.

Check the wiring connections between the oven sensor and the control board. If they are secure, then the oven sensor may need to be replaced to fix the F31 error code on your Whirlpool oven and range.

In Conclusion

The F31 error code on your Whirlpool oven or range is an indication of a shorted probe connection. By carefully inspecting and fixing any loose or damaged connections with the temperature sensor probe, you can often resolve this issue on your own. However, if the problem persists, it’s always best to seek assistance from a professional to ensure proper diagnosis and repair.

Remember, safety should always be your top priority when working with any electrical appliance. Always disconnect the power supply before troubleshooting or performing any repairs, and if you’re unsure about anything, it’s best to leave it to the experts.

With these steps and precautions in mind, we hope you can quickly resolve the F31 error code and get your Whirlpool oven or range back to its optimal working condition!