How to Reset an Amana Washer

(Many of the links in this article redirect to a specific reviewed product. Your purchase of these products through affiliate links helps to generate commission for Storables.com, at no extra cost. Learn more)

Introduction

Welcome to this guide on how to reset an Amana washer. If you’re experiencing any issues with your washer, such as it not starting or not functioning properly, performing a reset can often resolve the problem. Resetting the washer is a simple process that can be done without the need for a technician. In this article, we will walk you through the step-by-step instructions to reset your Amana washer, ensuring it’s back to optimal performance.

Amana is a well-established brand known for their durable and reliable appliances, including washers. However, like any electronic device, occasional glitches or malfunctions can occur. Performing a reset on your Amana washer can help to alleviate these issues and get your machine back up and running smoothly.

Before we dive into the steps to reset your Amana washer, it’s important to note that different models may have slightly different procedures. Therefore, it’s always a good idea to consult your owner’s manual for specific instructions tailored to your model. However, the general steps outlined in this guide should work for most Amana washer models.

Now that we have an overview, let’s get started with step 1: unplugging the washer.

Step 1: Unplug the Washer

The first step in resetting your Amana washer is to ensure that it’s completely unplugged from the power source. This is a crucial safety precaution to prevent any electrical accidents while you’re working on your washer.

To unplug the washer, simply locate the power cord at the back of the machine and gently pull it out of the wall socket. Make sure to verify that the washer is no longer receiving any power by checking that the control panel is completely dark.

It’s important to leave the washer unplugged for a few minutes to allow any residual electricity to dissipate. This will ensure a more effective reset process. During this time, you can proceed to the next step, which involves accessing the control panel.

Now that you have successfully unplugged the washer, let’s move on to step 2: accessing the control panel.

Step 2: Access the Control Panel

After unplugging the Amana washer, the next step is to access the control panel. This will allow you to navigate the settings and enter the service mode to perform the reset.

The location of the control panel may vary depending on the model of your Amana washer. In most cases, it is located at the top of the machine, either on the back or at the front. Look for a panel with buttons and indicators that control the washer’s functions.

If the control panel is at the front, you can easily access it by flipping open the top lid or door of the washer. For control panels at the back, you may need to pull the washer away from the wall to gain access.

Once you can clearly see the control panel, make sure it’s clean and free from any debris that could affect the functionality of the buttons. Use a soft cloth or a mild detergent to wipe away any dirt or grime.

Now that you’ve accessed the control panel, let’s move on to step 3: entering the service mode.

Step 3: Enter Service Mode

Entering the service mode of your Amana washer is essential to perform the reset. It allows you to access additional settings and features that are not available in normal operation mode.

To enter service mode, follow these steps:

1. Make sure the washer is plugged back into the power source.
2. Press and hold the specific combination of buttons on the control panel. The combination may vary depending on your Amana washer model, so it’s important to consult the owner’s manual for the correct button sequence.
3. Continue holding the buttons until the display shows the service mode indicator or a specific code.

Once you have successfully entered the service mode, you may see various options and codes displayed on the control panel. This is normal and indicates that you are in the correct mode to perform the reset.

If you are unsure about the button combination to enter the service mode, you can try a common sequence used for Amana washers: Press and hold the “Start” and “Cancel” buttons simultaneously or the “Power” and “Start” buttons together. If these combinations don’t work, consult the owner’s manual or the Amana customer support for the correct button sequence.

Now that you’ve entered the service mode, let’s proceed to step 4: resetting the washer.

To reset an Amana washer, unplug the machine for 1 minute, then plug it back in. Press and hold the “Start” button for 5 seconds to reset the control board.

Step 4: Reset the Washer

Now that you have entered the service mode of your Amana washer, it’s time to perform the reset. This step will restore the washer to its factory settings, clearing any previous configurations or errors.

To reset the washer, follow these steps:

1. Look for the specific reset option or code on the control panel display. Again, the location and name of the reset option may vary depending on your Amana washer model.
2. Select the reset option by pressing the corresponding button on the control panel. This may involve using the arrow keys or a specific reset button.
3. Confirm the reset by pressing the “Start” or “Enter” button. This will initiate the reset process.

During the reset, you may notice lights flashing or the display showing various messages or codes. This is normal and indicates that the reset is in progress. It’s important to let the reset process complete without interrupting it.

Once the reset is done, the washer will automatically restart and return to its initial setup screen or default settings. This means that any previous configurations or errors have been cleared, and your washer is now ready for use.

Now that you have successfully reset your Amana washer, let’s move on to the final step: exiting the service mode.

Step 5: Exit Service Mode

After performing the reset on your Amana washer, it’s important to exit the service mode to return the washer to normal operation. Exiting the service mode ensures that any changes you made during the reset are saved and that the washer functions correctly.

To exit the service mode, follow these steps:

1. Press and hold the “Power” button on the control panel. This will turn off the washer.
2. Once the washer is completely powered off, wait for a few seconds.
3. Press the “Power” button again to turn the washer back on. This will exit the service mode and return the washer to normal operation.

After exiting the service mode, the control panel display should show the regular settings and options for your Amana washer. You can now use the washer as you normally would, and any previous issues or errors should be resolved.

It’s always a good idea to test the washer after performing the reset to ensure that it’s working properly. Run a short cycle to check if all functions, such as filling, agitating, and draining, are functioning as expected.

Congratulations! You have successfully reset your Amana washer and resolved any issues you may have been facing. By following these steps, you’ve restored the washer to its optimal performance and can now enjoy hassle-free laundry cycles.

Remember, if you continue to experience any persistent issues or if the reset doesn’t resolve the problem, it’s recommended to consult the Amana customer support or a qualified technician for further assistance.

Thank you for using this guide on how to reset an Amana washer. We hope this article has been helpful, and happy laundering!

Conclusion

Resetting an Amana washer is a simple and effective way to resolve common issues and restore optimal functionality. By following the step-by-step instructions in this guide, you can easily reset your Amana washer and get it back to working order.

Start by unplugging the washer from the power source as a safety precaution. Then, access the control panel to enter the service mode. Once in the service mode, select the reset option and confirm the reset process. Allow the reset to complete, and then exit the service mode by powering off and on the washer.

Performing a reset clears any previous configurations or errors, returning the washer to its factory settings. This ensures that any problems that were causing the malfunction are resolved, and the washer is ready for normal use.

If you encounter any persistent issues or the reset doesn’t solve the problem, it’s always best to seek further assistance from Amana customer support or a qualified technician. They can provide additional guidance and support to address any underlying issues with your washer.

Regular maintenance and care of your Amana washer can also prevent future problems. Follow the manufacturer’s instructions for cleaning and maintenance, and handle the washer with care to prolong its lifespan and maintain its performance.

We hope that this guide has been helpful in guiding you through the process of resetting your Amana washer. With a properly functioning washer, you can enjoy clean and fresh laundry without any worries.

Thank you for reading, and we wish you success in resetting your Amana washer!