How To Use A Bissell Proheat Carpet Cleaner

(Many of the links in this article redirect to a specific reviewed product. Your purchase of these products through affiliate links helps to generate commission for Storables.com, at no extra cost. Learn more)

Introduction

Welcome to this comprehensive guide on how to use a Bissell Proheat carpet cleaner! If you’re tired of dealing with dirty and stained carpets, the Bissell Proheat can be your ultimate solution. This powerful carpet cleaning machine is designed to deep clean your carpets and eliminate stubborn dirt, stains, and odors, leaving your carpets fresh and rejuvenated.

In this article, we will walk you through a step-by-step process on how to effectively use a Bissell Proheat carpet cleaner. Whether you are a seasoned user looking for a refresher or a first-time user, this guide will provide you with all the information you need to achieve professional-quality carpet cleaning results.

Before we dive into the specifics, it’s important to note that the Bissell Proheat carpet cleaner comes with different models and features. While the basic operation remains the same, there might be slight variations in the controls and attachments depending on the model you own. Make sure to refer to your user manual for any model-specific instructions.

Now, let’s get started on the journey to cleaner and healthier carpets with your Bissell Proheat!

Step 1: Preparing the Bissell Proheat Carpet Cleaner

Before you start using the Bissell Proheat carpet cleaner, it is essential to properly prepare the machine and ensure that everything is ready for optimal performance. Follow these steps to get your carpet cleaner ready:

1. Check the Power Cord: Ensure that the power cord is in good condition and not damaged. If you spot any frays or cuts, do not use the machine and contact customer service for assistance.
2. Inspect the Clean Water Tank: Remove the clean water tank from the machine and check for any debris or leftover water. Rinse the tank with clean water if necessary.
3. Prepare the Cleaning Solution: Depending on your carpet’s needs and the recommendations provided by Bissell, prepare the cleaning solution. Some Bissell Proheat models come with a built-in cleaning solution tank, while others require you to mix the cleaning solution separately. Follow your machine’s instructions for the correct cleaning solution ratio.
4. Fill the Solution Tank: If your Bissell Proheat has a separate solution tank, fill it with the prepared cleaning solution. Ensure that the tank is securely in place and properly sealed.
5. Attach the Hose and Tools (if applicable): If you plan to use the hose and additional tools, such as the upholstery tool or crevice tool, ensure they are securely attached to the machine. These tools can be helpful for cleaning stairs, upholstery, and hard-to-reach areas.
6. Preheat the Machine: Depending on the model, your Bissell Proheat may require preheating. Follow the instructions provided in the user manual to preheat the machine before use. Preheating helps to ensure more effective cleaning.

By taking the time to properly prepare your Bissell Proheat carpet cleaner, you’ll set yourself up for success and ensure that the machine is ready to deliver exceptional cleaning results. Once you have completed these preparation steps, you’re ready to move on to the next phase of cleaning – preparing the carpet.

Step 2: Preparing the Carpet

Preparation is key when it comes to achieving the best results with your Bissell Proheat carpet cleaner. Before you start cleaning, it’s important to properly prepare the carpet to ensure effective and thorough cleaning. Follow these steps:

1. Remove Furniture and Objects: Clear the area to be cleaned by removing any furniture, rugs, or objects on the carpet. This will give you a clear and unobstructed path for cleaning.
2. Vacuum the Carpet: Use a quality vacuum cleaner to thoroughly vacuum the carpet. This step is important to remove loose dirt, dust, and debris that could potentially clog the carpet cleaner’s brushes or interfere with the cleaning process.
3. Spot Treat Stains (if necessary): If you have any stubborn stains on the carpet, it’s a good idea to spot-treat them before using the carpet cleaner. Use a suitable stain remover or a recommended carpet cleaning product and follow the instructions provided.
4. Prep High-Traffic Areas: Pay extra attention to high-traffic areas on your carpet, such as hallways or entranceways. These areas often accumulate more dirt and grime, so consider pre-treating them with a carpet cleaning solution or a pre-treatment spray.
5. Protect Baseboards and Furniture Legs: Cover or protect baseboards and furniture legs with plastic or aluminum foil to prevent any contact with the cleaning solution or water that may seep out during the cleaning process.

By properly preparing your carpet, you’ll ensure that the Bissell Proheat carpet cleaner can work efficiently and effectively. Removing furniture and objects, vacuuming, treating stains, and prepping high-traffic areas will lead to a more successful cleaning experience. Once your carpet is prepped, it’s time to move on to the next step – filling the clean water tank.

Step 3: Filling the Clean Water Tank

Now that your Bissell Proheat carpet cleaner and carpet are prepared, it’s time to fill the clean water tank. The clean water tank holds the water that will be used for cleaning your carpets. Follow these steps to ensure proper filling of the clean water tank:

1. Remove the Clean Water Tank: Locate the clean water tank on your Bissell Proheat carpet cleaner. Typically, it is located at the front or top of the machine. Gently lift and remove the tank from the machine to access the fill opening.
2. Check for the Fill Line: Look for the fill line markings on the tank. These markings indicate the maximum amount of water that can be filled into the tank. Do not exceed this fill line to avoid overfilling and potential leaks during operation.
3. Fill with Hot Tap Water: Open your hot water faucet and fill the tank with hot tap water. Using hot water helps to enhance the cleaning effectiveness. However, if your carpet manufacturer recommends using cool water, follow their guidelines instead.
4. Close the Tank: Once the tank is filled with water, securely close the tank by ensuring the cap or lid is properly aligned and tightly sealed. This will prevent any water from leaking during the cleaning process.
5. Reinsert the Clean Water Tank: Carefully place the filled clean water tank back into its position on the carpet cleaner. Ensure that it is seated correctly and securely locked into place.

By properly filling the clean water tank, you’ll have the necessary water supply to effectively clean your carpets. Remember to follow any specific instructions provided by Bissell or your carpet cleaner model for the best results. With the clean water tank filled, you’re now ready to move on to the next step – adding cleaning formula to the tank.

Step 4: Adding Cleaning Formula to the Tank

Adding the appropriate cleaning formula to the clean water tank is an essential step in maximizing the cleaning power of your Bissell Proheat carpet cleaner. The cleaning formula is specifically designed to break down dirt, stains, and odors, leaving your carpets fresh and clean. Follow these steps to add the cleaning formula to the tank:

1. Choose the Right Cleaning Formula: Bissell offers a range of cleaning formulas for different carpet cleaning needs, such as heavy traffic, pet stains, or odor elimination. Select the appropriate cleaning formula for your specific cleaning requirements.
2. Measure the Cleaning Formula: Check the guidelines provided on the cleaning formula bottle to determine the recommended amount to use. It’s important to use the correct ratio of cleaning formula to water for optimal cleaning results.
3. Add the Cleaning Formula: Open the fill opening on the clean water tank and carefully pour the measured cleaning formula into the tank. Take care not to spill the formula or exceed the maximum fill line.
4. Close and Mix: After adding the cleaning formula, securely close the fill opening of the clean water tank. Gently tilt and mix the tank to ensure that the cleaning formula and water are well combined.

Adding the appropriate cleaning formula to the clean water tank will enhance the cleaning power of your Bissell Proheat carpet cleaner. The cleaning formula works in conjunction with the hot water to effectively break down stains and dirt, resulting in cleaner and fresher carpets. With the cleaning formula added, you’re now ready to move on to the next step – operating the Bissell Proheat carpet cleaner.

Always start by thoroughly vacuuming the carpet to remove loose dirt and debris before using the Bissell Proheat Carpet Cleaner. This will ensure a more effective and efficient cleaning process.

Step 5: Operating the Bissell Proheat Carpet Cleaner

Now that you have properly prepared the Bissell Proheat carpet cleaner, including filling the clean water tank and adding the cleaning formula, it’s time to start operating the machine. Follow these steps to effectively use the Bissell Proheat carpet cleaner:

1. Plug in the Machine: Locate a power outlet near the area you plan to clean and plug in the Bissell Proheat carpet cleaner. Make sure the power cord is securely plugged in.
2. Turn on the Machine: Locate the power switch on the machine, usually located near the handle or on the control panel. Flip the switch to the “On” position to start the machine.
3. Select the Cleaning Mode: Most Bissell Proheat models offer different cleaning modes, such as “Deep Clean” or “Express Clean.” Choose the appropriate cleaning mode based on the level of dirt and stains on your carpet.
4. Press the Trigger: The Bissell Proheat carpet cleaner is designed with a trigger mechanism. Hold down the trigger located on the handle to release the cleaning solution and hot water mixture onto the carpet as you move the machine forward.
5. Move the Machine: Begin by pushing the machine slowly forward, allowing the brushes to agitate the carpet and effectively clean the fibers. Release the trigger when moving the machine backward to suction up the dirty water.
6. Overlap Strokes: To ensure thorough cleaning, overlap each pass of the Bissell Proheat machine. This will ensure that no areas are missed and will provide even cleaning across the entire carpet surface.
7. Work in Sections: Divide the room into manageable sections and clean one section at a time. This will help you maintain control over the machine and ensure that you clean the entire area without missing any spots.

As you operate the Bissell Proheat carpet cleaner, pay attention to the water and cleaning solution levels in the tank. Refill the clean water tank and add more cleaning solution as needed. Continue cleaning until you have covered the entire carpeted area.

Remember to follow the specific instructions provided by your Bissell Proheat model, as different models may have additional features or settings. With the Bissell Proheat carpet cleaner in operation, you are now on your way to achieving cleaner and fresher carpets!

Step 6: Cleaning the Carpet

Now that you have your Bissell Proheat carpet cleaner set up and ready for action, it’s time to start cleaning your carpet. Follow these steps for effective and efficient carpet cleaning:

1. Select the Starting Point: Choose a corner of the room as your starting point. This will help you maintain a systematic and organized cleaning process.
2. Begin Cleaning: Start by pressing the trigger to release the cleaning solution and hot water mixture onto the carpet. Slowly push the machine forward, allowing the rotating brushes to penetrate the carpet fibers and loosen dirt and stains.
3. Move in Straight Lines: Keep a steady and consistent pace, moving the machine in straight lines. This will ensure even and thorough cleaning across the entire carpeted area.
4. Overlap Strokes: Overlap each pass of the machine by a few inches to avoid missing any areas. This will ensure that you clean every inch of the carpet effectively.
5. Apply Extra Pressure (if needed): For particularly stubborn stains or high-traffic areas, you may need to apply extra pressure by pressing down on the machine’s handle. This will help to agitate the carpet fibers and provide a deeper clean.
6. Watch for Dirty Water: As you clean, keep an eye on the dirty water being suctioned up into the machine’s dirty water tank. If it becomes full, pause and empty the tank before continuing with the cleaning process.
7. Clean in Sections: Work in small sections, moving gradually across the room. This will help you maintain control over the machine and ensure that you cover the entire carpeted area without missing any spots.
8. Pay Attention to Drying Time: After cleaning, allow the carpet to dry completely before walking or placing furniture back on it. This will prevent any potential damage to the carpet and ensure the best results.

It’s important to note that the drying time can vary depending on factors such as humidity and carpet thickness. It’s best to allow 6 to 12 hours for the carpet to fully dry before resuming regular foot traffic.

By following these steps and maintaining a systematic approach to cleaning, you can achieve thorough and effective results with your Bissell Proheat carpet cleaner. Once you have completed cleaning the entire carpeted area, it’s time to move on to the next step – emptying the dirty water tank.

Step 7: Emptying the Dirty Water Tank

After completing the carpet cleaning process with your Bissell Proheat carpet cleaner, it’s important to properly empty the dirty water tank. This will ensure the longevity and optimal performance of your machine for future cleaning tasks. Follow these steps to empty the dirty water tank:

1. Turn Off the Machine: First, switch off the Bissell Proheat carpet cleaner by pressing the power button or flipping the switch to the “Off” position. This will prevent any accidental spills during the emptying process.
2. Detach the Dirty Water Tank: Locate the dirty water tank on the machine and remove it by gently lifting it upward or pulling the release tab. This will separate the tank from the main unit of the carpet cleaner.
3. Empty Dirty Water: Find a suitable location, such as a sink or toilet, to pour out the dirty water from the tank. Hold the tank over the designated area and carefully empty the contents into the drain, ensuring that you don’t spill any dirty water.
4. Rinse the Dirty Water Tank: Once the tank is emptied, rinse it thoroughly with clean water to remove any residual dirt or debris. This will help maintain the cleanliness of the tank and prevent any odors or buildup.
5. Dry the Tank: After rinsing, towel dry or air dry the dirty water tank before reattaching it to the carpet cleaner. This will prevent any moisture from interfering with the machine’s performance.
6. Reattach the Dirty Water Tank: Once the tank is completely dry, reattach it to the Bissell Proheat carpet cleaner. Ensure that it is securely locked into place to prevent any leaks during future use.

By following these steps, you’ll be able to properly empty and clean the dirty water tank of your Bissell Proheat carpet cleaner. Regularly emptying the dirty water tank after each use will help maintain the cleanliness and functionality of the machine.

With the dirty water tank emptied and cleaned, you have completed the essential steps for carpet cleaning with your Bissell Proheat carpet cleaner. However, to ensure the longevity and effectiveness of your machine, it’s important to follow proper maintenance and care practices, which we will cover in the next step.

Step 8: Maintenance and Care Tips

To keep your Bissell Proheat carpet cleaner in optimal condition and ensure its longevity, it’s essential to follow proper maintenance and care practices. Here are some tips to help you maintain and care for your carpet cleaner:

1. Clean the Brushes and Nozzles: Regularly clean the brushes and nozzles of your machine to prevent any buildup of dirt or debris. Follow the manufacturer’s instructions for removing and cleaning these components.
2. Empty and Rinse the Tanks: After each use, empty and rinse both the clean water tank and the dirty water tank. This will prevent any residue from remaining in the tanks and causing odors or blockages.
3. Inspect and Replace Parts: Regularly inspect the brushes, belts, and other parts of your Bissell Proheat carpet cleaner for signs of wear and tear. Replace any damaged or worn-out parts as necessary to maintain optimal performance.
4. Clean the Machine’s Exterior: Wipe down the exterior of your carpet cleaner with a damp cloth after each use to remove any dirt or cleaning solution residue. This will help keep the machine looking clean and prevent any buildup of grime.
5. Store Properly: When not in use, store your Bissell Proheat carpet cleaner in a cool, dry place where it won’t be exposed to extreme temperatures or moisture. This will help prolong its lifespan and prevent any damage.
6. Follow User Manual Guidelines: Always refer to the user manual that came with your Bissell Proheat carpet cleaner for specific maintenance instructions and guidelines. The manual will provide valuable information on cleaning, troubleshooting, and recommended maintenance practices.
7. Regularly Replace Filters: If your Bissell Proheat carpet cleaner has a filter, make sure to clean or replace it regularly according to the manufacturer’s instructions. This will ensure optimal suction and maintain the machine’s performance.
8. Perform Regular Tune-Ups: Consider scheduling regular tune-ups or professional servicing for your Bissell Proheat carpet cleaner to ensure its robust functionality and longevity. It’s a worthwhile investment to keep your machine in top shape.

By following these maintenance and care tips, you can prolong the life of your Bissell Proheat carpet cleaner and maintain its optimal performance. Taking proper care of your machine will ensure that it continues to deliver excellent carpet cleaning results for years to come.

Congratulations! You have now completed all the essential steps for using and maintaining your Bissell Proheat carpet cleaner. With these instructions in mind, you’ll be able to achieve professional-quality carpet cleaning results right in the comfort of your own home.

Please note that the specific instructions may vary depending on the model of your Bissell Proheat carpet cleaner. Always refer to the user manual for accurate and detailed guidelines.

Conclusion

Congratulations on learning how to effectively use and maintain your Bissell Proheat carpet cleaner! With the proper preparation and step-by-step process outlined in this comprehensive guide, you are well-equipped to tackle any carpet cleaning task and achieve professional-quality results.

Remember, the key to successful carpet cleaning lies in proper preparation, including preparing the Bissell Proheat carpet cleaner, prepping the carpet, filling the clean water tank, and adding the appropriate cleaning formula. Operating the machine with care, cleaning the carpet in an organized manner, and emptying the dirty water tank are also crucial steps. Additionally, practicing regular maintenance and care tips will ensure the longevity and optimal performance of your machine.

Always refer to your specific Bissell Proheat model’s user manual for detailed instructions and guidelines. Each model may have specific features or variations that require careful consideration and adherence to the provided instructions.

By following the information presented in this guide, you can confidently tackle carpet cleaning tasks, knowing that you have the knowledge and understanding to achieve remarkable results. Say goodbye to dirt, stains, and odors, and say hello to cleaner, fresher carpets that will enhance the overall aesthetics and hygiene of your space.

Thank you for reading this guide on how to use a Bissell Proheat carpet cleaner. We hope you found this information helpful and that it empowers you to make the most out of your carpet cleaning efforts.

Happy cleaning!