How Do You Put The Toilet Paper Into A Kohler Kelston Oil Rubbed Bronze Toilet Paper Holder

(Many of the links in this article redirect to a specific reviewed product. Your purchase of these products through affiliate links helps to generate commission for Storables.com, at no extra cost. Learn more)

Introduction

Welcome to our guide on how to properly install and use the Kohler Kelston Oil Rubbed Bronze Toilet Paper Holder. This stylish and functional accessory will add a touch of elegance to your bathroom while keeping your toilet paper easily accessible.

Installing a toilet paper holder may seem like a simple task, but it’s important to ensure that it is done correctly to prevent any mishaps or damage. In this article, we will walk you through the step-by-step process of installing and using the Kohler Kelston Oil Rubbed Bronze Toilet Paper Holder.

Whether you’re a DIY enthusiast or a novice, this guide is designed to provide detailed instructions to help you complete the installation successfully. So let’s get started! Make sure you have all the necessary tools and supplies ready before you begin.

Step 1: Gathering the necessary tools and supplies

Before you begin installing the Kohler Kelston Oil Rubbed Bronze Toilet Paper Holder, it’s essential to gather all the tools and supplies you’ll need. Having everything on hand will make the installation process smooth and efficient. Here’s a list of what you’ll need:

• Phillips head screwdriver
• Measuring tape or ruler
• Pencil or marker
• Level
• Drill
• Drill bit suitable for your wall type
• Wall anchors (if needed)
• Screws
• Toilet paper holder mounting hardware (included with the Kohler Kelston Oil Rubbed Bronze Toilet Paper Holder)

Once you have gathered all the tools and supplies, double-check to ensure that you have everything you need. It’s always better to be prepared before starting the installation process.

Now that you have all the necessary tools and supplies, you’re ready to move on to the next step: preparing the Kohler Kelston Oil Rubbed Bronze Toilet Paper Holder for installation.

Step 2: Preparing the Kohler Kelston Oil Rubbed Bronze Toilet Paper Holder

Before you can install the Kohler Kelston Oil Rubbed Bronze Toilet Paper Holder, it’s important to prepare it for installation. This step involves unpacking the holder and familiarizing yourself with its components.

Start by removing the toilet paper holder from its packaging. Be careful not to damage any of the parts during this process. Once the holder is unpacked, take a moment to inspect it for any visible defects or damage. If you notice any issues, contact the manufacturer for assistance or a replacement.

Next, locate the mounting hardware that is included with the Kohler Kelston Oil Rubbed Bronze Toilet Paper Holder. This hardware typically consists of screws, anchors, and any additional components needed for installation. Check that all the necessary hardware is present and in good condition.

Now, refer to the instruction manual or the guidelines provided by Kohler to identify the specific parts of the holder. This will help you understand how the pieces fit together and ensure that you install it correctly.

Take note of any special instructions or recommendations provided by the manufacturer. This may include guidelines on where to position the holder, how to align it with other bathroom accessories, or any specific care instructions for maintaining the oil rubbed bronze finish.

With the holder unpacked, the mounting hardware checked, and a clear understanding of the parts, you’re now ready to proceed to the next step: inserting the toilet paper roll into the holder.

Step 3: Inserting the toilet paper roll into the holder

Now that you have prepared the Kohler Kelston Oil Rubbed Bronze Toilet Paper Holder, it’s time to insert the toilet paper roll into the holder. This step is relatively straightforward, but it’s important to do it correctly to ensure that the toilet paper stays securely in place.

Start by locating the horizontal bar that will hold the toilet paper roll. This bar typically extends from the center of the holder and can be easily removed for inserting the toilet paper roll.

To remove the bar, look for small tabs or buttons on either end of the bar. Press or squeeze these tabs/buttons to release the bar from its secured position. Once released, pull the bar out of the holder gently.

Grab a fresh roll of toilet paper and remove any packaging or cardboard tubes. Hold the toilet paper roll horizontally and slide it onto the bar of the Kohler Kelston Oil Rubbed Bronze Toilet Paper Holder, ensuring that the roll is centered and balanced.

Once the toilet paper roll is positioned correctly on the bar, reinsert the bar back into the holder. Make sure to align the bar with the slots or hooks inside the holder. Apply gentle pressure to push the bar all the way in, securing the toilet paper roll in place.

Give the roll a light spin to ensure that it rotates smoothly without any obstructions or misalignment. If you notice any difficulties in the rotation, double-check the positioning of the roll and reseat it if necessary.

With the toilet paper roll successfully inserted and secured in the holder, you’re ready to move on to the next step: securing the toilet paper roll in place.

When installing the toilet paper into a Kohler Kelston Oil Rubbed Bronze Toilet Paper Holder, make sure to insert the paper roll with the loose end hanging over the top for easy access.

Step 4: Securing the toilet paper roll in place

Securing the toilet paper roll in the Kohler Kelston Oil Rubbed Bronze Toilet Paper Holder is an important step to ensure that the roll stays in place and does not unravel. This step involves adjusting the tension of the holder to provide enough resistance to prevent the roll from freely spinning.

First, take a moment to locate the tension adjustment mechanism on the holder. This mechanism is typically located on one or both ends of the horizontal bar. It may be in the form of a small screw or a spring-loaded mechanism.

If you see a screw, use a screwdriver to adjust the tension. Turn the screw clockwise to increase the tension, making it harder for the toilet paper roll to spin freely. Turn the screw counterclockwise to decrease the tension if you find it too difficult to pull the toilet paper.

If the tension adjustment is in the form of a spring-loaded mechanism, gently press the mechanism to increase the tension or release it to decrease the tension. Test the roll by pulling a few sheets of toilet paper to ensure it unrolls smoothly without unraveling too easily.

It’s important to find the right balance of tension. If the tension is too loose, the roll may unravel uncontrollably and create a mess. On the other hand, if the tension is too tight, it may be difficult to pull the toilet paper or cause it to tear.

Take your time to adjust the tension to your preference. Remember, it can be easily readjusted later if needed. Once you are satisfied with the tension, move on to the next step: testing the functionality of the toilet paper holder.</p

Step 5: Testing the functionality of the toilet paper holder

After securing the toilet paper roll in the Kohler Kelston Oil Rubbed Bronze Toilet Paper Holder, it’s important to test its functionality to ensure that it works properly. This step involves checking the stability of the roll, the ease of paper dispensing, and any additional features of the holder.

Start by gently pulling a few sheets of toilet paper from the roll. The paper should unroll smoothly and without resistance. If you encounter any difficulty or notice that the roll is not spinning freely, double-check the tension adjustment from the previous step and make any necessary adjustments.

Next, give the holder a gentle shake or tap to ensure that the roll remains stable and doesn’t easily dislodge. The toilet paper should stay securely in place without falling off the holder or coming loose.

If your Kohler Kelston Oil Rubbed Bronze Toilet Paper Holder has any additional features, such as a cover or lid, test their functionality as well. Open and close the cover to ensure smooth operation and proper closure to protect the toilet paper from moisture or dirt.

Finally, take a step back and admire your newly installed toilet paper holder. Check its overall appearance, making sure it complements the style of your bathroom and adds a touch of elegance to the space.

If you are satisfied with the functionality and the aesthetics of the toilet paper holder, congratulations! You have successfully installed and tested the Kohler Kelston Oil Rubbed Bronze Toilet Paper Holder. Your bathroom now has a stylish and functional accessory that will make your daily routine more convenient.

If you encounter any issues during the testing process or are not fully satisfied with the functionality, double-check the installation steps to ensure that everything has been done correctly. If necessary, consult the instruction manual or contact the manufacturer for further assistance or troubleshooting.

With the functionality of the toilet paper holder tested and confirmed, you can now enjoy the convenience and style it brings to your bathroom. Maintain the holder by periodically cleaning it with a non-abrasive cleaner to keep its oil rubbed bronze finish looking pristine for years to come.

Thank you for following our guide on how to install and use the Kohler Kelston Oil Rubbed Bronze Toilet Paper Holder. We hope this article has been helpful, and we wish you many hassle-free bathroom experiences!

Conclusion

Congratulations! You have successfully navigated the installation and usage of the Kohler Kelston Oil Rubbed Bronze Toilet Paper Holder. By following the steps outlined in this guide, you have not only added a stylish and functional accessory to your bathroom but also ensured that your toilet paper is easily accessible.

Remember, when installing the toilet paper holder, it is crucial to gather all the necessary tools and supplies beforehand. This will make the installation process smoother and more efficient. Take your time to prepare the holder, familiarize yourself with its components, and ensure that you have all the required hardware.

Inserting the toilet paper roll into the holder is a simple process, but be mindful of centering the roll and properly reinserting the horizontal bar. By doing so, you will ensure that the toilet paper roll rotates smoothly and remains securely in place.

Securing the toilet paper roll’s tension is an important step to prevent it from unraveling. Adjust the tension to your preference, finding the right balance that allows for easy dispensing without the roll spinning too freely or being too difficult to pull.

Testing the functionality of the toilet paper holder is the final step. Pull a few sheets of toilet paper to ensure smooth unrolling and verify that the roll remains stable. If your holder has additional features, such as a cover or lid, make sure they operate smoothly as well.

With everything successfully tested, you can now admire the Kohler Kelston Oil Rubbed Bronze Toilet Paper Holder in your bathroom. Its sleek design and functionality will undoubtedly enhance your bathroom experience.

Remember to periodically clean the holder with a non-abrasive cleaner to maintain its beautiful oil rubbed bronze finish. By doing so, you can enjoy the elegance and convenience of the holder for years to come.

Thank you for following our installation and usage guide for the Kohler Kelston Oil Rubbed Bronze Toilet Paper Holder. We hope this article has been informative and helpful, and we wish you many enjoyable moments in your bathroom with your new accessory.