How To Fix The Error Code EB For Whirlpool Oven & Range

(Many of the links in this article redirect to a specific reviewed product. Your purchase of these products through affiliate links helps to generate commission for Storables.com, at no extra cost. Learn more)

Is Your Whirlpool Oven and Range Experiencing the EB: Runaway Temperature Error Code? Here’s How to Fix It

There’s nothing more frustrating than preparing a delicious meal, only to be disrupted by a cryptic error code on your Whirlpool oven and range. One error code that may leave you scratching your head is the EB: Runaway Temperature code. But fear not! As an expert in appliance troubleshooting, I’m here to guide you through this issue and help you get back to cooking in no time.

Understanding the EB: Runaway Temperature Error Code

The EB: Runaway Temperature error code on your Whirlpool oven and range indicates that the oven’s internal temperature is exceeding the safe limit. This can be caused by a malfunctioning temperature sensor or a faulty control board. When this error occurs, the oven will automatically shut down to prevent any potential safety hazards.

To fix the error code EB on a Whirlpool oven or range, try resetting the appliance by unplugging it for a few minutes and then plugging it back in. If the error persists, consult the user manual for troubleshooting steps or contact Whirlpool customer service for assistance.

Fixing the EB: Runaway Temperature Error Code

Now that you know what the EB: Runaway Temperature error code means, it’s time to tackle the issue head-on. Here are the steps to fix it:

1. Turn off the power: Start by disconnecting the power to your Whirlpool oven and range. You can do this by either unplugging it from the wall or flipping the circuit breaker.
2. Allow the oven to cool down: Leave the oven untouched for at least 30 minutes to ensure that it has completely cooled down.
3. Inspect the temperature sensor: Open the oven door and locate the temperature sensor. It is usually located at the back of the oven, near the top. Check for any visible damage or signs of wear. If you notice any issues, the temperature sensor may need to be replaced.
4. Check the control board: If the temperature sensor appears to be in good condition, the problem may lie with the control board. Carefully remove the control panel cover to access the control board. Look for any visible signs of damage or loose connections. If necessary, contact a professional technician to assess and repair the control board.
5. Restore power and test: After inspecting and potentially repairing the temperature sensor or control board, reconnect the power to your oven and range. Turn it on and test if the EB: Runaway Temperature error code still persists. If the error code is gone, you’re good to go! If not, it’s time to reach out to Whirlpool’s customer service or consult with a professional technician for further assistance.

Remember, the steps provided are general guidelines and may vary depending on your specific Whirlpool oven and range model. Always refer to the owner’s manual for precise instructions and safety precautions.

Dealing with error codes can be frustrating, but by following these troubleshooting steps, you can resolve the EB: Runaway Temperature error code on your Whirlpool oven and range. Don’t let a simple error code keep you from enjoying your culinary adventures. Happy cooking!