How To Remove Battery From IPhone 5 Without A Screwdriver

(Many of the links in this article redirect to a specific reviewed product. Your purchase of these products through affiliate links helps to generate commission for Storables.com, at no extra cost. Learn more)

Introduction

Welcome to the comprehensive guide on how to remove the battery from an iPhone 5 without a screwdriver. Whether you’re replacing a worn-out battery or simply need to disconnect the power source for troubleshooting, this step-by-step tutorial will walk you through the process with ease. By following these instructions, you can safely and efficiently remove the battery from your iPhone 5 without the need for a screwdriver, saving you time and hassle.

With the right tools and a bit of patience, you can successfully complete this task and gain access to the iPhone’s battery compartment. So, let’s dive in and learn how to remove the battery from your iPhone 5, empowering you to take control of your device’s maintenance and repairs.

Step 1: Gather Necessary Tools

Before beginning the battery removal process, it’s essential to gather the necessary tools to ensure a smooth and successful operation. Here’s a list of the tools you’ll need:

• Plastic spudger or opening tool: This tool will help you safely pry open the iPhone 5 without causing damage to the casing or screen.
• Suction cup: A suction cup is essential for lifting the screen and creating a small gap, allowing access to the internal components of the iPhone.
• Tri-point screwdriver: This specialized screwdriver is used to remove the two pentalobe screws located at the bottom of the iPhone 5.
• Adhesive strips: These strips are helpful for resealing the iPhone after the battery replacement and ensuring a secure fit.
• Plastic card: A thin, flexible plastic card can aid in separating the adhesive securing the battery to the iPhone’s casing.
• Tweezers: Precision tweezers can assist in disconnecting small connectors and components within the iPhone.
• Microfiber cloth: Keeping a microfiber cloth handy is useful for cleaning the iPhone’s internal components and removing any dust or debris.

By having these tools at your disposal, you’ll be well-equipped to proceed with the battery removal process, minimizing the risk of damage to your iPhone and ensuring a successful outcome.

Step 2: Power Off the iPhone 5

Before beginning the battery removal process, it’s crucial to power off your iPhone 5 to prevent any potential electrical hazards and ensure the safety of the operation. Here’s how to power off your device:

1. Press and hold the power button located on the top edge of your iPhone 5.
2. After a few seconds, a “slide to power off” message will appear on the screen.
3. Swipe the slider from left to right to power off your device completely.

Once your iPhone 5 is powered off, you can proceed with the battery removal process without the risk of electrical interference. This simple yet essential step sets the stage for a safe and efficient battery removal procedure, ensuring that you can work on your device with peace of mind.

Step 3: Remove the Two Pentalobe Screws

With the iPhone 5 powered off, the next step is to remove the two pentalobe screws located at the bottom edge of the device. These screws secure the front panel to the rear case and must be removed to access the internal components, including the battery. Here’s how to remove the pentalobe screws:

1. Using a tri-point screwdriver, carefully unscrew the two pentalobe screws located on either side of the charging port at the bottom of the iPhone 5.
2. Place the screws in a secure location to prevent misplacement during the battery removal process.

By removing these screws, you’ll be one step closer to accessing the iPhone 5’s battery and proceeding with the removal process. It’s important to handle the screws with care and keep them in a safe place to ensure they can be reinstalled correctly after the battery replacement.

You can remove the battery from an iPhone 5 without a screwdriver by using a plastic opening tool or a guitar pick to carefully pry the battery out of its housing. Be gentle and take your time to avoid damaging the battery or the phone.

Step 4: Use a Suction Cup to Lift the Screen

After removing the pentalobe screws, the next step is to use a suction cup to carefully lift the screen of the iPhone 5, creating a small gap that allows access to the internal components. Here’s how to use a suction cup to lift the screen:

1. Position the suction cup near the Home button of the iPhone 5, ensuring that it is firmly attached to the screen.
2. Gently pull upward on the suction cup while holding the iPhone down with one hand to create a slight gap between the front panel and the rear case.
3. Insert a plastic spudger or opening tool into the gap, being careful not to apply too much pressure, and gently work your way around the edges to release the clips securing the front panel to the rear case.
4. Once the clips are released, carefully open the iPhone by swinging the display up from the left side, similar to the back cover of a book.

Using the suction cup and a gentle prying tool, you can effectively lift the screen of the iPhone 5, gaining access to the internal components, including the battery. This step sets the stage for disconnecting the battery and proceeding with its removal.

Step 5: Disconnect the Battery

With the iPhone 5’s screen lifted, the next crucial step is to disconnect the battery to ensure safe handling during the removal process. Here’s how to disconnect the battery from the iPhone 5:

1. Lift the battery connector bracket: Using a small Phillips screwdriver, carefully remove the screws securing the battery connector bracket in place.
2. Set the screws aside in a secure location to prevent misplacement.
3. Disconnect the battery: Gently lift the battery connector bracket and use a plastic spudger or opening tool to carefully disconnect the battery connector from the logic board. Ensure that you apply even pressure and avoid using excessive force to prevent damage to the connector or the logic board.

By disconnecting the battery, you’re taking a crucial step in ensuring the safety and integrity of the battery removal process. This step prepares the iPhone 5 for the final phase of the battery removal process, allowing you to proceed with confidence and precision.

Step 6: Remove the Battery

After disconnecting the battery, the final step is to remove the battery from the iPhone 5. Here’s how to safely remove the battery from your device:

1. Release the adhesive securing the battery: Using a plastic card or opening tool, gently pry up the battery from the adhesive securing it to the iPhone’s casing. Take care to apply even pressure and avoid bending or puncturing the battery.
2. Slowly lift the battery: Once the adhesive is released, carefully lift the battery from the iPhone, ensuring that no cables or components are obstructing its removal.
3. Inspect the battery: Before proceeding with a replacement, inspect the old battery for any signs of damage, swelling, or corrosion. If the battery shows any of these signs, it’s crucial to handle it with care and dispose of it properly according to local regulations for electronic waste.

By following these steps, you can safely remove the battery from your iPhone 5, paving the way for a replacement or any necessary maintenance. With the old battery removed, you can proceed with installing a new battery or addressing any other internal components that require attention.

With the battery removal process completed, you now have the knowledge and confidence to maintain and repair your iPhone 5’s power source without the need for a screwdriver, empowering you to take control of your device’s maintenance and extend its lifespan.