How To Fix The Error Code R DH For Samsung Refrigerator

(Many of the links in this article redirect to a specific reviewed product. Your purchase of these products through affiliate links helps to generate commission for Storables.com, at no extra cost. Learn more)

The Dreaded Error Code: r dH

Picture this: you wake up one morning, eager to grab your favorite chilled beverage from the fridge, only to discover that your Samsung refrigerator is flashing a mysterious error code: r dH. Panic sets in. What does it mean? Is it serious? How do you fix it? Take a deep breath, my fellow fridge owner, because I’m here to be your expert guide through this perplexing ordeal.

First, let’s decode the enigmatic r dH error code. In Samsung refrigerators, r dH stands for “Refrigerator Defrost Heater Error.” This error occurs when the defrost heater in your refrigerator malfunctions, causing the temperature in the freezer compartment to rise above normal.

But fear not! Fixing the r dH error code is not as daunting as it may seem. Here’s how you can troubleshoot and resolve this issue:

Check the Defrost Heater Assembly

Beneath the back panel of your freezer, there’s a defrost heater assembly responsible for melting frost buildup on the evaporator coils. Start by unplugging your refrigerator and removing the contents of the freezer.

Now, carefully take off the back panel to access the defrost heater assembly. Inspect the heater for any signs of damage, such as frayed wires or burned-out elements. If you spot any issues, it’s time to replace the defrost heater.

Test the Defrost Thermostat

The defrost thermostat plays a crucial role in regulating the freezer’s temperature and activating the defrost heater when needed. To ensure it’s functioning correctly, use a multimeter to test its continuity.

Disconnect the wires from the defrost thermostat and set your multimeter to the “continuity” or “ohms” setting. Touch the tester’s leads to the thermostat’s terminals. If the multimeter shows no continuity, that means the defrost thermostat has to be replaced.

To fix the error code r dH on a Samsung refrigerator, try resetting the unit by unplugging it for a few minutes and then plugging it back in. If the error persists, check the ice maker and water line for any issues. If necessary, consult the user manual or contact Samsung customer support for further assistance.

Examine the Defrost Sensor

Samsung refrigerators are equipped with a defrost sensor, also known as a defrost bi-metal thermostat. This sensor monitors the temperature of the evaporator coils and helps regulate the defrost cycle.

Locate the defrost sensor by referring to your refrigerator’s manual. Using a multimeter, check its continuity. If the multimeter indicates no continuity, the defrost sensor needs to be replaced.

Call in the Pros

If you’ve followed the steps above and the r dH error code persists, it’s advisable to contact a professional technician. They have the expertise to diagnose and fix more complex issues that may be causing the error, such as faulty control boards or wiring problems.

Remember, refrigerator repairs should always be approached with caution. If you’re uncomfortable working with electrical components or unsure about any steps, it’s best to seek professional help.

In conclusion, the r dH error code on your Samsung refrigerator may initially fill you with dread, but armed with the knowledge and steps outlined above, you can confidently tackle this issue. So, don’t let the error code hold you back from enjoying a perfectly chilled soda or ice cream treat – get to the root of the problem and get your fridge back in prime working order!