How To Reset Maytag Dryer

(Many of the links in this article redirect to a specific reviewed product. Your purchase of these products through affiliate links helps to generate commission for Storables.com, at no extra cost. Learn more)

Introduction

A Maytag dryer is an essential appliance in any household, providing the convenience of quickly drying your clothes. However, just like any electronic device, it may experience occasional glitches or malfunctions. One common issue you may encounter is when your Maytag dryer stops working or fails to start altogether. This can be frustrating, especially if you have a pile of laundry waiting to be dried.

Fortunately, many dryer models, including Maytag, are equipped with a reset button that can help resolve minor issues and get your dryer up and running again. Resetting your Maytag dryer is a simple step you can take to troubleshoot and resolve potential problems without the need for professional assistance.

In this article, we will guide you through the step-by-step process of resetting your Maytag dryer. Whether your dryer has suddenly stopped working, is displaying error codes, or is simply not functioning as it should, these steps will help you reset it and, hopefully, get it back in working order.

Before we begin, it’s important to note that these instructions are meant for Maytag dryers specifically. If you have a different brand or model, the reset process may vary. Refer to your dryer’s user manual or contact the manufacturer for detailed instructions.

Step 1: Unplug the Dryer

The first and most crucial step in resetting your Maytag dryer is to ensure it is safely disconnected from the power supply. Unplugging the dryer will prevent any potential electrical shocks or accidents while you perform the reset.

To unplug the dryer, locate the power cord attached to the back of the appliance. Follow the cord until you find the outlet it is plugged into. Gently and firmly pull the plug out of the outlet, ensuring you do not yank or tug on the cord excessively. Be careful not to damage the cord or the outlet in the process.

If you have a gas dryer, make sure to turn off the gas supply before proceeding. Locate the gas valve and turn it to the “Off” position. This step is crucial for your safety and the proper functioning of the dryer.

Once the dryer is completely disconnected from the power source or gas supply, ensure that the control panel and all buttons are not responsive. This confirms that the dryer is truly unplugged.

Now that your Maytag dryer is safely disconnected, you can move on to the next step in the reset process.

Step 2: Locate the Control Panel

After ensuring that your Maytag dryer is safely unplugged, the next step is to locate the control panel. The control panel is where you’ll find the buttons and settings that allow you to operate the dryer.

In most Maytag dryers, the control panel is located on the top or front of the appliance. It may be a digital panel with a display screen or a simple panel with physical buttons. Look for a section on the front or top of the dryer that is dedicated to controlling and adjusting the settings.

If you’re having trouble finding the control panel, consult your dryer’s user manual or refer to the manufacturer’s website for visual guides or diagrams specific to your model.

Once you’ve located the control panel, take a moment to familiarize yourself with the different buttons and settings. Most Maytag dryers have standard options such as “Power,” “Start,” “Cycle Selection,” and temperature control. Understanding how the control panel functions will make it easier to navigate and perform the reset.

Now that you’ve located the control panel, it’s time to move on to the next step in resetting your Maytag dryer.

Step 3: Access the Reset Button

With the control panel of your Maytag dryer identified, it’s time to locate the reset button. The reset button is a small, recessed button typically found on the control panel or near the power cord area.

The placement of the reset button may vary depending on the model of your Maytag dryer. It’s important to refer to your dryer’s user manual or check the manufacturer’s website for specific instructions on finding the reset button for your particular model.

Typically, the reset button will be labeled or indicated with a small icon. It may be labeled as “Reset,” “Restart,” or have a symbol resembling an arrow in a circular motion. Take a moment to visually scan the control panel and surrounding area for any indication of the reset button.

If you’re unable to locate the reset button, try removing the control panel cover. The cover can usually be removed by gently prying it off with a flathead screwdriver or by following the instructions provided in your dryer’s user manual.

Once you’ve accessed the reset button, ensure that you have the necessary tools to press it. A small pen, paperclip, or toothpick can be used to press the reset button. Make sure the tool you choose is clean and won’t damage the button or the control panel.

Now that you know where to find the reset button, you’re ready to move on to the next step and perform the reset.

Step 4: Press the Reset Button

Now that you have located the reset button on your Maytag dryer, it’s time to perform the reset. Pressing the reset button will help clear any minor glitches or errors that may be causing your dryer to malfunction.

Using the tool you have chosen, whether it’s a pen, paperclip, or toothpick, gently press and hold down the reset button. Apply slight pressure and hold it for a few seconds, typically around 10 to 15 seconds. This will allow the reset process to initiate.

During this time, you may notice indicators such as lights flashing or the control panel going through a reset sequence. These are normal indications that the reset process is taking place.

Make sure to hold down the reset button until you see or feel a response from the control panel. This can vary depending on your specific Maytag dryer model, but it can include a beep sound, a message on the display screen, or a change in the indicator lights.

Once you have completed the reset process by holding down the reset button for the specified time, release the button and wait for a few seconds. This allows the dryer to complete the reset and recalibrate its system.

Now that you have successfully pressed the reset button, it’s time to move on to the next step and reconnect your Maytag dryer to the power supply.

Step 5: Plug in the Dryer

After performing the reset on your Maytag dryer, the next step is to plug it back into the power supply. This will restore the electrical connection and allow the dryer to receive the necessary power to function properly.

Take the power cord of the dryer and locate the power outlet that you previously unplugged it from in Step 1. Ensure that the outlet is easily accessible and in good working condition.

Gently guide the plug of the dryer’s power cord into the outlet, making sure that it fits securely and snugly. Avoid forcing the plug into the outlet as this may cause damage to the plug or outlet.

Once the plug is fully inserted into the outlet, give it a gentle tug to ensure that it is securely connected. This will help prevent any accidental disconnections while the dryer is in use.

For gas dryers, it’s also important to turn on the gas supply valve after plugging in the dryer. Locate the gas valve and turn it to the “On” position. This step ensures that the necessary gas supply is available for the dryer’s operation.

With the dryer now plugged in and the power supply restored, you’re ready to move on to the final step and test the dryer to see if the reset has resolved the issue.

To reset a Maytag dryer, unplug the dryer for a few minutes, then plug it back in. This can help reset the control board and resolve minor issues.

Step 6: Test the Dryer

After following the previous steps and resetting your Maytag dryer, it’s time to test it to see if the issue has been resolved. Testing the dryer will help you determine if the reset has successfully resolved any minor glitches or malfunctions.

To test the dryer, there are a few key things you can do:

1. Power On

Press the power button on the control panel to turn on the dryer. Check if the control panel lights up and if the dryer displays any error codes or messages. If the control panel responds and there are no error indications, proceed to the next step.

2. Select a Cycle

Choose a drying cycle and adjust the settings as desired. For example, select a normal drying cycle and set the appropriate heat level and drying time. Ensure that the selected cycle matches your laundry needs.

3. Start the Dryer

Press the start button on the control panel to initiate the drying cycle. Listen for the sound of the dryer running and check if the drum starts rotating. Observe if the dryer is heating up and if the air vents are functioning properly.

4. Observe Drying Performance

Monitor the drying process and observe if the clothes are drying properly. Pay attention to any unusual noises, excessive vibrations, or abnormal behavior. If the dryer is functioning as expected and the clothes are drying effectively, it indicates that the reset has resolved the issue.

If, after testing, you notice that the dryer is still not working correctly or experiencing the same issue, you may need to consult a professional technician or contact Maytag customer support for further assistance.

With the dryer successfully tested, you have completed the process of resetting your Maytag dryer. By following these steps, you have taken a proactive approach to resolving minor issues and ensuring the optimal performance of your appliance.

Conclusion

Resetting your Maytag dryer can be a simple and effective way to troubleshoot and resolve minor issues that may arise during its operation. By following the step-by-step process outlined in this article, you can reset your dryer and potentially get it back in working order without the need for professional assistance.

Throughout the reset process, it’s crucial to prioritize your safety by unplugging the dryer and, if applicable, turning off the gas supply before proceeding. Take the time to locate the control panel and reset button, ensuring that you have the necessary tools and understanding of how the buttons and settings function.

Pressing the reset button allows the dryer to clear any minor glitches or errors that may be causing malfunctions. Afterward, you can safely plug the dryer back into the power supply or turn on the gas supply for gas dryers.

Finally, test the dryer by powering it on, selecting a cycle, and starting the drying process. Observe its performance, ensuring that it heats up properly, rotates the drum, and effectively dries your clothes. If the issue persists, it might be necessary to seek assistance from a professional technician or contact Maytag customer support.

Remember to consult your dryer’s user manual or the manufacturer’s website for specific instructions related to your Maytag dryer model.

By taking the initiative to reset your Maytag dryer, you’ve demonstrated your ability to troubleshoot and address minor issues. This simple process can save you time and money by avoiding unnecessary service calls and keeping your dryer running smoothly for years to come.

We hope this guide has helped you successfully reset your Maytag dryer and resolve any issues you may have encountered. Happy drying!