How To Reset Sunbeam A Heating Blanket

(Many of the links in this article redirect to a specific reviewed product. Your purchase of these products through affiliate links helps to generate commission for Storables.com, at no extra cost. Learn more)

Introduction

Welcome to the comprehensive guide on how to reset a Sunbeam heating blanket. Sunbeam heating blankets are a popular choice for providing soothing warmth and comfort during the colder months. However, like any electronic device, these blankets can occasionally experience technical issues or glitches that may require a reset.

Performing a reset on your Sunbeam heating blanket is a simple process that can help resolve various problems, such as a blanket not heating up or not functioning properly. In this article, we will walk you through the steps to reset your Sunbeam heating blanket and get it back to its optimal performance.

Before we begin, please note that the reset process may vary slightly depending on the model of your Sunbeam heating blanket. It is always a good idea to consult the manufacturer’s instructions or your product manual for any specific guidelines or warnings.

Now, let’s dive into the step-by-step process of resetting your Sunbeam heating blanket and getting it back to working condition!

Step 1: Unplug the heating blanket

The first step in resetting your Sunbeam heating blanket is to unplug it from the power source. This is an important safety precaution that ensures you won’t accidentally come into contact with any electrical components while performing the reset.

Locate the plug of your heating blanket and gently pull it out from the power outlet. Make sure to firmly grasp the plug and avoid pulling on the cord itself, as this can damage the wiring.

Once the heating blanket is unplugged, take a moment to inspect the cord and plug for any visible signs of damage. If you notice frayed wires, exposed insulation, or any other issues with the cord, it is recommended to discontinue use and seek a replacement or professional repair.

By unplugging the heating blanket, you are ensuring the safety of both yourself and the blanket during the reset process.

Now that you have successfully unplugged the heating blanket, let’s move on to the next step.

Step 2: Remove blankets and bedding

Before proceeding with the reset, it is crucial to remove any additional blankets, bedding, or materials that may be covering the heating blanket. This step is necessary to ensure a proper and thorough reset.

Start by removing any top layers of blankets or comforters that are placed on top of the heating blanket. Set them aside for the time being, as you will need to access the heating blanket directly.

Next, remove any sheets or mattress covers that may be covering the heating blanket. Take care to fold them neatly and set them aside, ensuring they are kept away from any potential hazards or spills.

By removing the layers of blankets and bedding, you will have unobstructed access to the heating blanket itself, making it easier to perform the reset.

It is worth noting that if your heating blanket has any specific cleaning instructions, such as being machine washable, you can take this opportunity to clean it as recommended. However, do ensure that the heating blanket is completely dry before proceeding with the reset process.

With the blankets and bedding removed, you are now ready to move on to the next step of resetting your Sunbeam heating blanket.

Step 3: Locate the reset button

Once you have unplugged the heating blanket and removed the blankets and bedding, the next step is to locate the reset button. The reset button is a small button usually located on the control unit of the heating blanket or on the blanket itself.

Start by examining the control unit of your heating blanket. Look for any buttons or switches that are labeled specifically as “reset” or that have a symbol indicating a reset function. The location of the reset button may vary depending on the model of your Sunbeam heating blanket, so take your time to familiarize yourself with the layout and design of the control unit.

If you cannot find a reset button on the control unit, check the blanket itself. Some models of Sunbeam heating blankets have the reset button integrated into the fabric or near the connectors. Carefully inspect the edges and corners of the blanket for any small buttons or switches.

If you are still unable to locate the reset button, consult the manufacturer’s instructions or refer to your product manual for specific guidance. They should provide you with the exact location of the reset button for your particular model.

Once you have successfully identified the reset button, you are ready to proceed to the next step of resetting your Sunbeam heating blanket.

Unplug the Sunbeam A Heating Blanket from the power source. Remove the controller and then plug the blanket back in. Reattach the controller and set it to your desired heat level.

Step 4: Press and hold the reset button

Now that you have located the reset button on your Sunbeam heating blanket, it’s time to move on to the reset process itself. This step involves pressing and holding the reset button to initiate the reset.

Before pressing the reset button, make sure your heating blanket is still unplugged. This is a critical safety precaution to avoid any potential electrical shocks or accidents during the reset.

Once you are certain the heating blanket is unplugged, place your finger or thumb on the reset button. You will typically need to press and hold the button for approximately 5-10 seconds, but the exact duration may vary based on the model of your Sunbeam heating blanket.

While holding the reset button, you may notice some indication that the reset process is in progress. This can be a flashing light on the control unit or a change in the display. However, it’s important to note that some models may not have any visible indication of the reset process.

Continue to hold the reset button for the specified duration, ensuring a steady and consistent pressure. This allows the heating blanket to reset its internal components and settings, resolving any potential issues that may have been causing it to malfunction.

After the specified duration, you can proceed to the next step of releasing the reset button and testing the heating blanket.

Note: If your Sunbeam heating blanket does not have a physical reset button, the reset process might involve a combination of button presses or different steps. In such cases, refer to the manufacturer’s instructions or your product manual for the specific reset procedure.

Step 5: Release the reset button

After holding the reset button on your Sunbeam heating blanket for the specified duration, it’s time to release the button and move on to the next step.

Gently lift your finger or thumb off the reset button, ensuring a smooth release. Give the heating blanket a moment to respond to the reset process and recalibrate its internal settings.

Once you have released the reset button, it’s a good idea to visually inspect the control unit or the blanket for any changes or indications that the reset was successful. Look for any changes in the display, lights, or indicators on the control unit. If your heating blanket was showing any error codes or malfunctions, these should now be cleared.

Keep in mind that some models may not have any visible indication after the reset, but rest assured that the internal components have been reset and the blanket is ready for testing.

With the reset button released, you can proceed to the final step of testing your Sunbeam heating blanket to ensure it is functioning properly.

Note: If after releasing the reset button, the issues persist, it may be necessary to repeat the reset process or consult the manufacturer’s instructions for troubleshooting steps specific to your model.

Step 6: Test the heating blanket

After completing the reset process for your Sunbeam heating blanket, it’s essential to test it to ensure that it is functioning properly. This step will verify whether the reset has successfully resolved any issues that were affecting the blanket’s performance.

Begin by plugging the heating blanket back into a power outlet. Ensure that the plug is securely inserted and that there are no loose connections.

Once the heating blanket is plugged in, locate the control unit and set it to your desired heat setting. Most Sunbeam heating blankets come with adjustable heat settings, typically controlled by a dial or buttons on the control unit. Select your preferred level of warmth and allow the blanket a few moments to heat up.

During this testing phase, pay close attention to the functioning of the blanket. Check if it is heating up properly and evenly across the surface. Also, ensure that any additional features, such as timers or auto-shutoff, are working as intended.

If you had any specific issues with the heating blanket before the reset, check whether those issues have been resolved. For example, if the blanket wasn’t heating up evenly or was overheating, verify if these problems have been rectified after the reset.

Furthermore, it’s a good practice to try out different heat settings to ensure the versatility and functionality of the heating blanket. Test if you can easily adjust the temperature to your desired comfort level and if the blanket maintains that temperature consistently.

If, after testing the heating blanket, you find that it is functioning properly and providing the desired warmth, congratulations! Your reset was successful, and your Sunbeam heating blanket is ready to be used.

However, if you encounter any persisting issues or discover new problems during the testing phase, it may be necessary to repeat the reset process or consider seeking further assistance from the manufacturer or a professional technician.

By following these six steps – unplugging the heating blanket, removing blankets and bedding, locating the reset button, pressing and holding the reset button, releasing the reset button, and testing the heating blanket – you can effectively reset your Sunbeam heating blanket and restore its optimal performance.

Conclusion

Resetting your Sunbeam heating blanket can be a simple and effective solution for resolving common issues and restoring its functionality. By following the step-by-step guide outlined in this article, you can easily reset your heating blanket and enjoy its soothing warmth and comfort once again.

Remember to always prioritize safety by unplugging the heating blanket before starting the reset process and taking necessary precautions to avoid electrical accidents.

Locating the reset button and following the specific instructions provided by the manufacturer for your model is crucial to ensure a successful reset. If you’re unable to locate the reset button or encounter any difficulties, referring to the manufacturer’s instructions or contacting customer support can provide further assistance.

After releasing the reset button, take the time to test the heating blanket and verify its proper functioning. Checking for even heat distribution, monitoring additional features, and adjusting the heat settings will help ensure that the reset has resolved any previous issues.

If you encounter ongoing or new issues even after attempting the reset process, it may be necessary to consider professional help or contact the manufacturer for further guidance and troubleshooting.

Resetting your Sunbeam heating blanket is a practical and cost-effective solution to revive its performance. By following these steps and taking proper care of your heating blanket, you can continue to enjoy its warmth and comfort for many cozy nights to come.

Remember to consult your product manual or manufacturer’s instructions for any specific guidelines or warnings related to your Sunbeam heating blanket model. The information provided in this article serves as a general guide but may vary based on the specific product.

Stay warm, stay cozy, and enjoy the comfort provided by your Sunbeam heating blanket!