How To Clean A Samsung Top Load Washer

(Many of the links in this article redirect to a specific reviewed product. Your purchase of these products through affiliate links helps to generate commission for Storables.com, at no extra cost. Learn more)

Introduction

Welcome to our guide on how to clean a Samsung top load washer! Keeping your washing machine clean is essential for maintaining its efficiency and prolonging its lifespan. Over time, detergent residue, dirt, and grime can build up inside the drum, causing odors and affecting the machine’s performance. By following a few simple steps, you can ensure that your Samsung top load washer stays clean and fresh.

Before we dive into the cleaning process, it’s important to note that different Samsung models may have specific instructions and features. Therefore, it’s always best to consult your washer’s user manual for any guidelines or precautions specific to your machine. With that in mind, let’s get started!

Note: Before cleaning the washer, ensure that it’s unplugged and disconnected from the power source for your safety.

In the sections below, we’ll go through the step-by-step process of cleaning your Samsung top load washer, covering both the exterior and interior areas of the machine. This comprehensive guide will help you remove residue, eliminate odors, and keep your washer in optimal condition. Let’s begin by preparing for the cleaning process.

Preparing for Cleaning

Before you start cleaning your Samsung top load washer, it’s important to gather the necessary supplies. Here’s what you’ll need:

1. A clean, lint-free cloth or sponge
2. Mild detergent or a specialized washing machine cleaner
3. Vinegar or bleach (optional)
4. A toothbrush or small brush for hard-to-reach areas
5. A towel or rag to protect the floor

Once you have all the supplies ready, follow these steps to prepare your washer for cleaning:

1. Empty the drum: If there are any items in the washer, remove them and ensure that the drum is completely empty before starting the cleaning process.
2. Set the water temperature: Select the appropriate water temperature setting depending on the type of cleaning agent you’ll be using. Hot water is generally effective for removing stains and odors, but be sure to check the manufacturer’s recommendations.
3. Remove loose dirt: Use a clean cloth or sponge to wipe away any loose dirt or debris from the exterior of the washer.
4. Protect the floor: Place a towel or rag beneath the machine to protect the floor and catch any drips or spills during the cleaning process.

Once you’ve completed these steps, you’re ready to move on to cleaning the exterior of your Samsung top load washer. Let’s dive in!

Cleaning the Exterior

Keeping the exterior of your Samsung top load washer clean not only improves its appearance but also helps prevent dirt and grime from entering the interior components. Follow these steps to clean the exterior:

1. Dampen a clean, lint-free cloth or sponge with water.
2. Add a small amount of mild detergent to the cloth or sponge.
3. Gently scrub the exterior surfaces of the washer, including the control panel, lid, and sides.
4. Pay extra attention to areas with visible stains or spills.
5. Rinse the cloth or sponge with clean water and wring out any excess moisture.
6. Wipe away any soapy residue from the washer’s exterior.
7. Dry the surfaces thoroughly with a clean, dry cloth.

If there are stubborn stains or marks on the exterior, you can try using a specialized stainless steel cleaner or a mixture of equal parts vinegar and water. Apply the cleaner or vinegar solution to a cloth and gently rub the affected areas. Rinse with clean water and dry thoroughly.

Remember to avoid using abrasive cleaners, harsh chemicals, or rough scrubbing tools that may scratch or damage the surface of your washer. Additionally, never spray water directly onto the control panel or other electronic components.

Once you’ve completed cleaning the exterior of your Samsung top load washer, it’s time to move on to cleaning the drum. Let’s continue!

Cleaning the Drum

The drum of your Samsung top load washer is where all the cleaning magic happens. Over time, detergent residue, fabric softener, and dirt can accumulate inside the drum, leading to unpleasant odors and affecting the performance of your machine. Here’s how you can clean the drum:

1. Fill the drum with hot water: Start by filling the drum with hot water until it’s approximately three-quarters full. The hot water helps to loosen and dissolve any residue.
2. Add detergent or a specialized washing machine cleaner: Add a small amount of mild detergent or a washing machine cleaner to the water. Follow the instructions on the cleaner’s packaging for the appropriate amount.
3. Start the wash cycle: Close the lid and select a wash cycle with the longest duration and highest water level setting. This will allow the cleaning solution to circulate throughout the drum.
4. Let the cycle complete: Allow the wash cycle to complete, including the rinse and spin cycles.
5. Wipe the drum: Once the cycle is finished, open the lid and use a clean cloth or sponge to wipe down the interior surfaces of the drum, removing any remaining residue or grime.
6. Rinse the drum: Fill the drum with clean water and run a rinse only cycle to remove any leftover detergent or cleaner. This step will help prevent any potential skin irritation caused by the cleaning agents.

For added freshness, you can add a cup of vinegar during the rinse cycle. The vinegar helps to remove any lingering odors and leaves the drum smelling clean and fresh.

After cleaning the drum, it’s important to remove any residual water from the machine. To do this, leave the lid open for a few hours or overnight to allow the drum to air dry. This will help prevent the growth of mold or mildew inside the washer.

With the drum now clean, it’s time to tackle any remaining residue and odors. Keep reading to learn how to remove stubborn buildup and eliminate unwanted smells.

Removing Residue and Odor

If you notice stubborn residue or lingering odor in your Samsung top load washer, don’t worry! There are a few methods you can try to remove buildup and freshen up your machine:

1. Vinegar and Baking Soda Method: Start by adding two cups of white vinegar to the drum. Run a wash cycle using hot water and select the highest water level. After the cycle is complete, sprinkle half a cup of baking soda inside the drum and run another hot water wash cycle. This method helps remove residue and neutralize odors.
2. Bleach Method: If your washer is resistant to bleach, check the manufacturer’s guidelines before proceeding. Add one cup of bleach to the drum and run a wash cycle using hot water. Make sure to select the highest water level to ensure thorough cleaning. Bleach can be effective in killing bacteria and eliminating strong odors.
3. Specialized Washing Machine Cleaner: If you prefer a ready-made solution, you can use a specialized washing machine cleaner. Follow the instructions on the packaging to determine the appropriate amount and method of application.

After using any of these methods, it’s essential to rinse the drum thoroughly by running a rinse-only cycle with hot water. This step helps remove any leftover cleaning agents and prevents skin irritation.

For regular maintenance, it’s a good idea to leave the lid open between uses to allow the drum to dry out. This helps prevent the growth of mold and mildew. Additionally, wiping down the drum and other components with a clean cloth after each use can help minimize the accumulation of residue and dirt.

Now that you’ve tackled residue and odor, let’s move on to cleaning the dispenser tray of your Samsung top load washer.

To clean a Samsung top load washer, run a cleaning cycle with a washing machine cleaner or a mixture of vinegar and baking soda to remove any residue and odors. Wipe down the exterior and door seal regularly to prevent mold and mildew buildup.

Cleaning the Dispenser Tray

The dispenser tray of your Samsung top load washer is where you add detergent, fabric softener, and other laundry additives. Over time, residue and buildup can accumulate in the tray, leading to clogs, odors, and ineffective dispensing. Here’s how you can clean the dispenser tray:

1. Remove the dispenser tray: Start by pulling out the dispenser tray from the washer. Most Samsung top load washers have removable trays that can be easily accessed.
2. Disassemble the tray: If your dispenser tray has multiple compartments, disassemble them by removing any removable parts, such as the detergent compartment or fabric softener insert. Check the user manual for guidance on disassembling your specific dispenser tray.
3. Wash the tray: Rinse the dispenser tray under warm water to remove any loose residue. Use a small brush or toothbrush to scrub the tray, focusing on the compartments and any hard-to-reach areas. You can also use a mild detergent or a mixture of vinegar and water for a deeper clean.
4. Remove stubborn residue: If there are any stubborn residue or stains that won’t come off easily, soak the tray in a solution of equal parts vinegar and warm water. Let it sit for a few minutes to loosen the residue, then scrub again.
5. Rinse and dry: After cleaning the dispenser tray, rinse it thoroughly under running water to remove any leftover cleaning solution or residue. Allow the tray to air dry completely before reassembling and inserting it back into the washer.

Regularly cleaning the dispenser tray helps ensure that detergents and fabric softeners are properly dispensed, preventing clogs and maintaining the efficiency of your washer.

Now that you’ve cleaned the dispenser tray, it’s time to address another crucial component of your Samsung top load washer – the filter.

Cleaning the Filter

The filter in your Samsung top load washer is responsible for trapping lint, debris, and other foreign objects to prevent them from clogging the drain system. Regularly cleaning the filter is essential to maintain the washer’s performance and prevent drainage issues. Here’s how you can clean the filter:

1. Locate the filter: The filter is usually located at the bottom front of the machine behind a small panel. Look for the filter access panel and open it.
2. Prepare for water drainage: Place a towel or a shallow container beneath the filter access area to catch any water that may spill out during the cleaning process.
3. Remove the filter: Unscrew or unclip the filter cover to remove it from the machine. Be cautious as water may be present in the filter compartment.
4. Clean the filter: Rinse the filter under running water to remove any debris or lint. Use a soft brush or toothbrush to gently scrub away any stubborn residue. Ensure that all the trapped materials are completely removed.
5. Inspect the filter compartment: While the filter is removed, inspect the filter compartment for any debris or buildup. Clean the compartment using a damp cloth or sponge, making sure to wipe away any residue.
6. Reinstall the filter: Once the filter and compartment are clean and dry, reinstall the filter and securely fasten the filter cover or panel.

It’s recommended to clean the filter every 2-3 months or more frequently if you notice any drainage issues or excessive lint buildup. Keeping the filter clean will not only prevent potential clogs but also help maintain the efficiency and longevity of your Samsung top load washer.

Now that you’ve cleaned the filter, let’s move on to learn how to maintain a clean washer for optimal performance.

Maintaining a Clean Washer

In addition to periodic cleaning, there are several steps you can take to maintain a clean Samsung top load washer on an ongoing basis. By incorporating these practices into your laundry routine, you can ensure optimal performance and longevity of your machine:

1. Use the right amount of detergent: Avoid using excessive amounts of detergent as it can lead to residue buildup. Follow the manufacturer’s recommendations for detergent dosage based on load size and soil level.
2. Choose the correct cycle: Select the appropriate wash cycle for each load to prevent unnecessary strain on the machine. Using the right cycle ensures that clothes are properly cleaned without compromising the washer’s performance.
3. Remove wet laundry promptly: As soon as a cycle is complete, promptly remove the wet laundry from the washer. Leaving damp clothes in the washer for an extended period can contribute to unpleasant odors and mold growth.
4. Leave the lid open: After each use, leave the lid open to allow air circulation and moisture evaporation. This helps prevent the growth of mold and mildew inside the drum.
5. Clean the rubber gasket: If your Samsung top load washer has a rubber gasket around the door, regularly inspect and clean it. Wipe the gasket with a damp cloth to remove any residue or debris, and ensure that it is dry before closing the door.
6. Check for leaks: Routinely inspect the washer for any signs of water leakage. If you notice any leaks or abnormal water flow, promptly address the issue to prevent damage to the machine and surrounding areas.
7. Regularly clean hoses and vents: Occasionally, check and clean the drain hoses and vents to remove any potential clogs or obstructions. Clearing any blockages helps ensure proper water flow and drainage.

By following these maintenance practices, you can keep your Samsung top load washer clean, fresh, and in peak condition for years to come.

Now that you have a comprehensive understanding of how to clean and maintain your Samsung top load washer, you’re all set to enjoy its efficient performance and longevity. Remember to consult your washer’s user manual for any specific instructions or recommendations from the manufacturer. Happy washing!

**Note: The information provided in this article is general in nature. Always refer to the specific guidelines and recommendations provided by the manufacturer for your exact Samsung top load washer model.

Conclusion

Cleaning your Samsung top load washer is essential for maintaining its performance, efficiency, and longevity. By following the steps outlined in this article, you can keep your washer clean, fresh, and odor-free.

Start by preparing for the cleaning process, gathering the necessary supplies, and ensuring that the machine is unplugged and disconnected from the power source. Clean the exterior using a mild detergent and cloth, paying extra attention to stains and spills.

Next, move on to cleaning the drum by filling it with hot water and adding detergent or a washing machine cleaner. Run a wash cycle and wipe down the interior surfaces with a cloth. Rinse the drum thoroughly and leave the lid open to air dry.

To remove stubborn residue and odor, you can use vinegar and baking soda, bleach, or a specialized washing machine cleaner. Rinse the drum thoroughly and allow it to air dry to prevent mold or mildew growth.

Cleaning the dispenser tray is essential to ensure proper dispensing of detergents and softeners. Remove the tray, wash it with warm water and detergent, and rinse it thoroughly before reassembling and placing it back into the machine.

Don’t forget about the filter! Regularly clean the filter to prevent clogs and maintain the washer’s performance. Remove the filter, rinse it, and clean the filter compartment before reinstalling the filter.

In addition to proper cleaning, maintaining a clean washer involves using the right amount of detergent, choosing the correct wash cycle, and removing wet laundry promptly. Leaving the lid open, cleaning the rubber gasket, checking for leaks, and cleaning hoses and vents are also important practices for ongoing maintenance.

By incorporating these cleaning and maintenance practices into your laundry routine, you can ensure that your Samsung top load washer stays in optimal condition for years to come.

Remember to consult your washer’s user manual for any specific instructions or recommendations provided by the manufacturer. Following their guidelines will help you get the best results and avoid any potential damage to your machine.

Now you’re well-equipped to clean your Samsung top load washer effectively and enjoy the benefits of a fresh and efficient laundry experience. Happy washing!