How To Install Franklin Brass Towel Ring

(Many of the links in this article redirect to a specific reviewed product. Your purchase of these products through affiliate links helps to generate commission for Storables.com, at no extra cost. Learn more)

Introduction

Welcome to this step-by-step guide on how to install a Franklin Brass towel ring. Adding a towel ring to your bathroom can not only provide a convenient place to hang towels but also add a touch of style and functionality to your space. Whether you’re a seasoned DIYer or a beginner looking to tackle a home improvement project, installing a Franklin Brass towel ring is a relatively simple task that can be done in just a few steps.

In this guide, we will walk you through the installation process, from gathering the necessary tools and materials to securing the towel ring in place. We’ll provide detailed instructions and tips to ensure a successful and sturdy installation.

Before we get started, it’s important to note that this guide is specifically for installing a Franklin Brass towel ring. It’s always a good idea to refer to the manufacturer’s instructions that come with your specific towel ring model for any variations or additional steps.

Now, let’s gather our tools and materials and dive into this installation guide!

Step 1: Gather the necessary tools and materials

Before you begin the installation process of your Franklin Brass towel ring, it’s essential to gather all the tools and materials you will need. Having everything ready beforehand will help streamline the installation and prevent any unnecessary delays. Here are the tools and materials you will need:

• Franklin Brass towel ring kit (including mounting bracket and hardware)
• Drill
• Tape measure
• Pencil or marker
• Screwdriver (Phillips or flathead, depending on the screws provided)
• Level
• Wall anchors (if needed)
• Optional: Stud finder (if you plan to mount the towel ring on a stud)

Make sure to check the Franklin Brass towel ring kit for any additional tools or hardware specific to the model you have purchased. It’s always a good idea to double-check the instructions provided by Franklin Brass to ensure you have everything you need.

Once you have gathered all the necessary tools and materials, find a suitable work area where you can comfortably complete the installation without any obstructions. Now that you have everything ready, let’s move on to preparing the installation area.

Step 2: Prepare the installation area

Before you begin installing the Franklin Brass towel ring, it’s important to prepare the installation area to ensure a smooth and secure mounting. Follow these steps to prepare the area:

1. Clean the wall: Start by cleaning the wall where you plan to install the towel ring. Remove any dirt, grime, or residue using a mild cleaning solution and a clean cloth. This step will ensure that the mounting surface is clean and free from any obstruction that could affect the adhesion of the towel ring.
2. Identify the location: Determine the ideal location for the towel ring. Consider the height and accessibility that will be comfortable for you and other users. Keep in mind that the towel ring should be easily reachable, preferably near a sink or shower area.
3. Check for studs: Use a stud finder to locate any studs in the wall within the desired installation area. If you’re able to mount the towel ring directly onto a stud, it will provide extra stability. Mark the location of the studs with a pencil for reference. If there are no studs available or they don’t align with your desired location, you’ll need to use wall anchors to secure the mounting bracket.
4. Measure and mark: Use a tape measure and a pencil to measure and mark the exact position where you plan to install the towel ring. Double-check the measurements and ensure that the markings align with your desired location and any studs you have identified.

By preparing the installation area properly, you will ensure a secure and visually pleasing installation. The next step is to mark the mounting location accurately — let’s move on to step 3.

Step 3: Mark the mounting location

Now that you have prepared the installation area, it’s time to mark the precise location where you will mount the Franklin Brass towel ring. Follow these steps to mark the mounting location accurately:

1. Place the mounting bracket: Take the mounting bracket included in your Franklin Brass towel ring kit and hold it against the wall in the desired location. Ensure that it is level and aligned with any studs you have identified or your marked measurements.
2. Mark the screw holes: Once the bracket is in the correct position, use a pencil or marker to mark the screw holes on the wall. This will indicate where you will need to drill or insert wall anchors for secure mounting. Take your time to ensure that the marks are precise and aligned with the bracket.
3. Double-check the positioning: Before moving forward, double-check the positioning of the marked holes with a level. This will ensure that the towel ring will be properly aligned and not slanted when mounted. Make any necessary adjustments if the markings appear to be off-level.

By marking the mounting location accurately, you will ensure a proper and visually pleasing installation of your Franklin Brass towel ring. With the locations marked, you are ready to move on to the next step: installing the mounting bracket.

Step 4: Install the mounting bracket

With the mounting location marked, it’s time to install the mounting bracket for your Franklin Brass towel ring. Follow these steps to securely install the bracket:

1. Drill pilot holes: If you’re mounting the towel ring onto studs, use a drill with an appropriate bit to drill pilot holes into the marked screw hole locations. Make sure to use a bit that is slightly smaller than the screws provided in the Franklin Brass towel ring kit. This will help prevent any splitting or damage to the wall.
2. Insert wall anchors (if necessary): If you’re not mounting the towel ring onto studs or if the pilot holes are too large for the screws, you’ll need to insert wall anchors. Follow the manufacturer’s instructions for the specific type of wall anchors you are using. Typically, this involves inserting the anchors into the pilot holes using a hammer or screwdriver handle.
3. Attach the mounting bracket: Align the mounting bracket with the pilot holes or wall anchors, then use a screwdriver to secure it in place. If you’re using wall anchors, make sure they are fully tightened against the wall.
4. Double-check the level: Before proceeding, verify that the mounting bracket is level using a bubble level. Adjust if necessary to ensure that the towel ring will hang straight.

By properly installing the mounting bracket, you will lay the foundation for a sturdy and secure towel ring installation. Once the bracket is in place, you are ready to move on to the next step: attaching the towel ring to the bracket.

When installing a Franklin Brass towel ring, make sure to use the provided template for accurate placement. Use a level to ensure it is straight, and secure it with the included hardware for a sturdy installation.

Step 5: Attach the towel ring to the bracket

Now that the mounting bracket is securely installed, it’s time to attach the towel ring to the bracket. Follow these steps to complete this process:

1. Remove the towel ring from the packaging: Take the towel ring out of the packaging and ensure that all the necessary components, such as the mounting plate and screws, are included.
2. Position the towel ring: Hold the towel ring over the mounting bracket and align the screw holes on the back of the towel ring with the corresponding holes on the bracket.
3. Insert and tighten the screws: Insert the screws provided into the screw holes on the back of the towel ring. Use a screwdriver to tighten the screws, ensuring that the towel ring is securely attached to the bracket. Take care not to overtighten the screws to avoid damaging the towel ring or bracket.

With the towel ring properly attached to the mounting bracket, you’re one step closer to a fully installed Franklin Brass towel ring. However, there’s one more important step to ensure its stability: securing the towel ring in place. Let’s move on to the next step.

Step 6: Secure the towel ring in place

After attaching the towel ring to the bracket, it’s crucial to ensure that it is properly secured in place. Follow these steps to secure the towel ring:

1. Tighten the set screw (if applicable): Some Franklin Brass towel ring models have a set screw that needs to be tightened to secure the towel ring to the bracket. Locate the set screw, usually located underneath or at the base of the towel ring, and use an Allen wrench or a small screwdriver to tighten it. This will prevent the towel ring from coming loose over time.
2. Test the stability: Give the towel ring a gentle tug to check its stability. If it feels loose or wobbly, use a screwdriver to tighten the screws on the bracket that secure the towel ring. Ensure that the screws are tightened enough to hold the towel ring firmly in place.
3. Verify the alignment: Take a step back and visually inspect the towel ring and bracket to ensure that they are aligned and straight. Use a level to make any adjustments if needed, ensuring that the towel ring hangs correctly.

By properly securing the towel ring in place, you can enjoy its functionality without worrying about it becoming loose or unstable. Now that the towel ring is securely installed, let’s move on to the final step: testing its stability.

Step 7: Test the towel ring’s stability

After completing the installation of the Franklin Brass towel ring, it’s important to test its stability to ensure that it can securely hold towels without any risk of falling or coming loose. Follow these steps to test the towel ring’s stability:

1. Hang a towel on the ring: Take a towel and hang it on the towel ring to simulate real-world usage. Make sure the towel is evenly distributed on the ring.
2. Gently tug the towel: Give the towel a gentle tug to gauge the stability of the towel ring. It should remain securely in place without any excessive movement or wobbling.
3. Check for any loose components: While testing the towel ring’s stability, inspect the mounting bracket, screws, and towel ring itself for any signs of looseness. If anything feels loose, use a screwdriver to tighten the necessary components.

If the towel ring passes the stability test and remains secure with the towel hanging, then you have successfully installed the Franklin Brass towel ring. However, if you encounter any issues during the stability test or notice any signs of looseness, it may indicate that the installation needs adjustment or further tightening. Revisit the previous steps to ensure that the towel ring is securely mounted.

Now that you have tested the towel ring’s stability, it’s time to step back and enjoy your newly installed Franklin Brass towel ring!

Step 8: Enjoy your newly installed Franklin Brass towel ring

Congratulations! You have successfully installed your Franklin Brass towel ring. It’s now time to step back and enjoy the benefits of your new addition to the bathroom. Here are a few things to keep in mind as you start using your towel ring:

1. Hang towels with care: When hanging towels on the towel ring, make sure to do so with care and avoid overloading it. This will help maintain the towel ring’s stability and prevent any unnecessary strain.
2. Regular maintenance: It’s a good practice to regularly clean and maintain your towel ring to keep it looking its best. Wipe it down with a damp cloth and mild cleaning solution to remove any dirt or residue. Avoid using harsh chemicals or abrasive cleaners that may damage the finish.
3. Upgrade other bathroom accessories: If you’re happy with the result of your Franklin Brass towel ring installation, consider upgrading other bathroom accessories to match and create a cohesive look. Franklin Brass offers a wide range of bathroom hardware options, including towel bars, toilet paper holders, and robe hooks.
4. Share the joy: If you’re pleased with your new towel ring, don’t hesitate to share your success with others. Recommend the Franklin Brass brand to friends and family who may be looking for reliable and stylish bathroom hardware solutions.

By following these tips, you can ensure that your newly installed Franklin Brass towel ring continues to enhance your bathroom experience for years to come.

We hope this step-by-step guide has been helpful in guiding you through the process of installing your Franklin Brass towel ring. Remember to read and follow the manufacturer’s instructions that come with your specific towel ring model for any variations or additional steps.

Enjoy your new towel ring and the convenience it brings to your bathroom!

Conclusion

Installing a Franklin Brass towel ring is a straightforward process that can add both functionality and style to your bathroom. By carefully following the steps outlined in this guide, you can successfully install the towel ring and enjoy its benefits for years to come.

We began by gathering the necessary tools and materials, ensuring that everything is in place before starting the installation. Preparing the installation area and marking the mounting location are crucial steps that help ensure a smooth and secure installation. Installing the mounting bracket and attaching the towel ring to it provide the foundation for a stable and reliable towel-hanging solution.

Securing the towel ring, testing its stability, and enjoying the final results are important aspects of the installation process. By closely following the steps outlined in this guide, you can ensure that your Franklin Brass towel ring is securely mounted and ready to hold your towels with confidence.

Remember to perform regular maintenance to keep your towel ring looking its best and consider expanding your bathroom hardware with other Franklin Brass products for a cohesive and stylish bathroom design.

We hope you have found this guide helpful and that your experience with your newly installed Franklin Brass towel ring brings you joy and convenience for years to come. Enjoy your beautifully organized and functional bathroom!