How To Reset Whirlpool Dryer

(Many of the links in this article redirect to a specific reviewed product. Your purchase of these products through affiliate links helps to generate commission for Storables.com, at no extra cost. Learn more)

Introduction

Having a Whirlpool dryer that is not working properly can be frustrating. It may not be heating, spinning, or drying your clothes as expected. In some cases, a simple fix can be to reset the dryer, which can help resolve minor issues and get it back to its normal functioning. In this article, we will guide you on how to reset a Whirlpool dryer effortlessly.

Before we dive into the steps, it’s important to note that performing a reset is a basic troubleshooting technique that can be done by most users. However, if you are uncomfortable or unsure about any aspect of the process, it is recommended to seek assistance from a professional technician.

Resetting your Whirlpool dryer is a simple process that involves a few easy steps. By following the instructions below, you can potentially resolve common issues and save yourself the expense and inconvenience of a service call.

Step 1: Unplug the dryer

The first step in resetting your Whirlpool dryer is to ensure that it is completely disconnected from the power source. This is crucial for your safety and to protect the appliance from any electrical surges during the reset process.

Locate the power cord at the back of the dryer and unplug it from the wall outlet. It’s important to physically remove the power source rather than simply turning off the dryer using the power button or control panel. By unplugging the dryer, you are effectively cutting off the electricity supply and allowing the internal systems to reset.

Take a moment to inspect the power cord and the outlet for any visible signs of damage or fraying. If you notice any issues, it is advisable to address them and have a qualified electrician repair or replace the damaged components.

Once you have unplugged the dryer, ensure that the cord is safely secured and not in a position where it can trip someone or become a hazard. Now that the dryer is disconnected from the power source, you can proceed to the next step in the reset process.

Step 2: Locate the reset button

After unplugging the Whirlpool dryer, the next step is to locate the reset button. The reset button is typically located on the control panel or inside the dryer’s cabinet. Its exact placement may vary depending on the model and make of your Whirlpool dryer.

If your dryer has a control panel on the front, look for a small button labeled “Reset” or “Restart.” This button is usually situated alongside other control buttons such as the power button or cycle selection buttons. It may be recessed or have a protective cover to prevent accidental resets.

For some Whirlpool dryers, the reset button might be inside the dryer cabinet. In this case, you will need to open the dryer door and locate the reset button near the door opening or around the lint trap area.

If you are having trouble finding the reset button, refer to the dryer’s user manual or visit the Whirlpool website for specific instructions and diagrams related to your dryer model.

Take a moment to inspect the reset button and make sure it is not damaged or stuck. If you notice any abnormalities, refrain from proceeding with the reset process and contact a professional technician for assistance.

Once you have located the reset button and ensured its functionality, you are ready to move on to the next step of the Whirlpool dryer reset process.

Step 3: Press and hold the reset button

With the Whirlpool dryer unplugged and the reset button located, it’s time to proceed to the next step: pressing and holding the reset button.

Using your finger or a suitable tool, gently press and hold down the reset button. The duration for which you need to hold the button may vary depending on the model and make of your Whirlpool dryer. Generally, holding the button for 5 to 10 seconds should be sufficient.

As you press and hold the reset button, you may feel a slight clicking or resistance. This is normal and indicates that the internal components are resetting to their default settings. It’s important to ensure a firm and steady pressure on the reset button throughout this step.

While holding the reset button, you may also notice some effects on the dryer, such as the control panel turning off or a reset indicator light flashing. These changes are part of the reset process and are meant to indicate that the internal systems are being reset.

During this step, make sure to maintain focus and keep an eye on the reset button and any accompanying indicators or changes on the dryer. This will help you determine whether the reset is successful and provide feedback on the status of the reset process.

After holding the reset button for the designated time, you can proceed to the next step to complete the Whirlpool dryer reset.

To reset a Whirlpool dryer, unplug it for 5 minutes, then plug it back in. If the issue persists, check the circuit breaker and ensure the door is securely closed. If problems continue, consult the user manual or contact Whirlpool customer support.

Step 4: Release the reset button

Now that you have held the reset button for the required duration, it’s time to release it. This step is crucial as it allows the Whirlpool dryer to complete the reset process and re-establish its default settings.

Simply remove your finger or the tool from the reset button and let go. You may feel a slight click or release as you release the button, indicating that the reset process has been completed.

After releasing the reset button, take a moment to observe any changes in the dryer’s control panel or indicators. You may notice that the control panel turns back on, or the indicator lights stop flashing. These signs suggest that the reset has been successful, and the dryer is ready to be plugged back in.

During this step, it’s important to exercise patience and allow the reset process to complete fully. Avoid interrupting the process or attempting to restart the dryer immediately after releasing the reset button.

By releasing the reset button, you have effectively signaled to the Whirlpool dryer that it needs to reinitialize and revert to its default settings. This prepares it for the next step in the reset process: plugging the dryer back in.

Step 5: Plug the dryer back in

After successfully releasing the reset button, it’s time to reconnect the Whirlpool dryer to the power source. This step allows the dryer to regain access to electricity and power up its systems.

Take the power cord of the dryer and plug it securely into a functioning wall outlet. Ensure that the plug fits snugly into the outlet and that there are no loose connections.

Before proceeding, it’s essential to verify that the wall outlet is supplying electricity. You can do this by plugging in another electronic device and confirming that it powers on. If there is no power in the outlet, it may indicate a separate electrical issue that needs to be addressed by a qualified electrician.

Once you have plugged the dryer back in, perform a quick visual check of the power cord to ensure there is no damage or wear. If you notice any signs of damage, it is crucial to address them before proceeding further.

With the dryer firmly connected to the power source, you are now ready to move on to the final step of the reset process: testing the dryer to ensure it is functioning correctly.

Step 6: Test the dryer

After plugging the Whirlpool dryer back in, the final step is to test its functionality to ensure that the reset has resolved the issues you were experiencing. Testing the dryer will help you determine if it is now operating as expected.

Start by selecting a drying cycle and adjusting any desired settings such as temperature or time. Close the dryer door securely and press the start button or activate the cycle using the control panel.

Observe the dryer as it begins the drying cycle. Look for signs of normal operation, such as the drum spinning, the heating element activating, and the control panel responding to your inputs. Pay attention to any unusual noises, error messages, or error codes that may appear.

If the dryer is now functioning properly and completing the drying cycle without any issues, it indicates that the reset was successful, and the problems you were facing have been resolved.

However, if you notice that the dryer is still not operating correctly or experiencing the same issues as before the reset, it may indicate a more significant problem. In this case, it is advisable to contact a professional technician or Whirlpool customer support for further assistance.

Testing the dryer after the reset ensures that you have successfully resolved any minor issues and can now continue to use your Whirlpool dryer without any interruptions or malfunctions.

Conclusion

Resetting a Whirlpool dryer can be a straightforward solution to minor issues that may disrupt its normal operation. By following the step-by-step process outlined in this article, you can easily reset your dryer and potentially resolve the problems you were encountering.

Remember, it’s important to unplug the dryer before proceeding with the reset process to ensure your safety and protect the appliance from electrical surges. Additionally, locating and pressing the reset button, holding it for the designated time, and then releasing it allows the dryer’s internal systems to reset and revert to their default settings.

Once the reset is complete, plugging the dryer back in and testing its functionality will confirm whether the issues have been resolved. If the dryer is now operating normally, you can continue to enjoy its efficient and reliable performance.

However, if the problems persist or if any new issues arise, it is advisable to seek assistance from a professional technician or Whirlpool customer support. They will be able to provide specialized guidance and diagnose any underlying problems that may require further attention.

By taking the time to reset and troubleshoot your Whirlpool dryer, you can potentially save time and money on unnecessary repairs or service calls. Remember to refer to the user manual specific to your dryer model or consult the Whirlpool website for additional information and instructions.

With these steps and guidelines in mind, you can confidently reset your Whirlpool dryer and get it back to working efficiently, ensuring that your laundry routine is uninterrupted and hassle-free.