DIY Guide To Installing A Kitchen Pot Filler With Touchless Technology

(Many of the links in this article redirect to a specific reviewed product. Your purchase of these products through affiliate links helps to generate commission for Storables.com, at no extra cost. Learn more)

Introduction

Installing a kitchen pot filler with touchless technology can be a fantastic upgrade for any home, enhancing both functionality and aesthetics. This guide will walk you through the step-by-step process of installing a pot filler, focusing on the touchless models that offer convenience and modern design. Whether you're a seasoned DIY enthusiast or a beginner, this comprehensive guide will help you navigate the installation process with ease.

Why Install a Touchless Pot Filler?

A touchless pot filler is a game-changer in the kitchen. Imagine not having to lug heavy pots filled with water from the sink to the stove. With a pot filler, you can fill your pots right on the stove, saving you time and effort. Plus, touchless technology means you won't have to worry about dirty hands contaminating your faucet. It's a win-win for hygiene and convenience. Not to mention, a sleek pot filler can add a modern touch to your kitchen, making it look more sophisticated and high-end. So, if you're looking to upgrade your kitchen, a touchless pot filler is a smart choice.

Tools and Materials Needed

Before diving into the installation, it's essential to gather all the necessary tools and materials. Here’s a list of what you’ll need:

• Touchless Pot Filler Faucet: Choose a model that fits your kitchen design and plumbing setup.
• Adjustable Wrench: For disconnecting water supply lines.
• Basin Wrench: For removing old faucet connections.
• Phillips-Head Screwdriver: For various mounting screws.
• Channel Locks: For securing old faucet connections.
• Teflon Tape: For ensuring watertight connections.
• Mounting Bracket: Included with the pot filler faucet.
• Screws and Washers: Provided with the faucet or purchased separately.
• Level: To ensure proper alignment.
• Bucket and Towels: For catching water during disconnections.
• Power Drill (Optional): For drilling into tile or stone if necessary.

Preparation

Step 1: Shut Off Water Supply

The first and most critical step is to shut off the water supply lines. Locate the shut-off valves under your sink and turn them clockwise to stop the water flow. Open the faucet to drain any remaining water from the lines. This precautionary measure prevents water from spilling during the installation process.

Step 2: Disconnect Water Supply Lines

Using an adjustable wrench, disconnect both hot and cold water supply lines from the shut-off valves or directly from the old faucet. Have a bucket or container ready to catch any water that might still be in the lines. Keep a towel handy to clean up any spills.

Step 3: Remove Old Faucet

Not all faucets are secured in place the same way. Some may have a large locknut from the underside of the sink, while others use a threaded rod with a nut securing it to a mounting plate on the underside of the sink. Use channel locks to loosen any locknuts or nuts holding the old faucet in place. Once loose, you should be able to remove the old faucet entirely.

Step 4: Prepare Mounting Bracket

The mounting bracket for your touchless pot filler faucet usually comes with the package. Identify the mounting bracket and ensure it is properly aligned with your sink's plumbing setup. Secure the mounting bracket to the wall stud using screws provided with the faucet.

Step 5: Install Mounting Bracket

Using a level, ensure that the mounting bracket is perfectly level along its vertical scale. This is crucial for maintaining proper alignment and preventing any water leaks during operation. Once aligned, tighten the screws securely.

Step 6: Install Inlet Housing

The inlet housing should be wrapped with Teflon tape in the direction of the threads fully two to three times. This ensures a watertight connection when you thread it onto the 1/2” inlet. Leave the inlet housing cover in place until you install the pot filler tap.

Step 7: Install Pot Filler Tap

Remove the inlet housing cover and install the pot filler tap onto the trim piece with its centering pin positioned on top right. Fully extend and articulate the arm to ensure it is securely fastened to the inlet housing. Using a 10mm Allen key, firmly tighten the inlet housing.

Step 8: Secure Pot Filler Trim Piece

Insert the pot filler trim piece into the inlet housing using a 10mm Allen key. Ensure it is securely fastened by tightening it firmly.

Step 9: Apply Paste for Watertight Connection

Apply paste onto the inside thread of both pipes (inlet housing and faucet) before screwing them together. This provides an additional layer of protection against leaks.

Step 10: Mount Pot Filler Faucet

Mounting screws usually come with your touchless pot filler faucet kit. Use these screws along with washers provided to secure your new faucet onto its mounting bracket. Make sure they are tightened securely but not over-tightened as this could damage surrounding surfaces like tile or stone.

Installing Touchless Technology

Step-by-Step Guide for Touchless Installation

1. Mount Control Box: Fasten the battery-powered control box inside your cabinet using two screws provided with your touchless faucet kit.

2. Connect Water Supply Lines: Plug water supply lines into push-to-connect fittings along top and bottom of control box.

3. Connect Power Line: Plug power line into corresponding fitting on control box.

4. Connect Data Cable: Plug data cable into fitting on control box if applicable for advanced features like temperature control or sensor activation.

5. Install Battery: Insert battery into control box according to manufacturer’s instructions.

6. Adjust Water Temperature Setting: Adjust water temperature setting according to preference using controls on control box if applicable.

7. Snap Counterbalance Weight: Snap counterbalance weight onto hose connected to retractable spray head ensuring proper alignment and preventing hose sagging during use.

8. Test Faucet: Open shut-off valves under sink allowing water flow through newly installed touchless pot filler faucet ensuring proper operation without leaks or issues.

Additional Tips & Considerations

Winterization for Outdoor Use

If you plan on using your galley pot filler tap outdoors during winter months where temperatures drop below freezing point, ensure proper winterization procedures are followed:

1. Turn off water supply lines disconnecting hot and cold supply hoses from under sink area.

2. Open handle draining any remaining water from system completely before disconnection.

3. Release set screw securing handle allowing full access underneath sink area for thorough cleaning maintenance purposes only!

4 Remove cartridge replacing it with new one if necessary following manufacturer’s guidelines provided within user manual documentation included within packaging materials received upon purchase date!

5 Reassemble entire system ensuring all connections secure watertight seals maintained throughout process completion stages!

Maintenance & Cleaning

Regular maintenance cleaning practices should be adhered strictly preserving finish longevity lifespan overall performance efficiency levels expected from high-quality touchless kitchen appliances installed within residential commercial settings alike!

For matte polished stainless steel finishes recommended regular cleaning soft wet cloths avoiding detergents harsh chemicals potentially damaging surface coatings applied during manufacturing process stages!

Conclusion

Installing a kitchen pot filler with touchless technology enhances both functionality aesthetics within modern kitchens today By following detailed step-by-step guide outlined above ensuring all necessary precautions taken throughout installation process completion stages successfully achieved desired outcomes expected from high-quality touchless kitchen appliances installed within residential commercial settings alike!

Whether seasoned DIY enthusiast beginner alike following comprehensive guide provided herein will help navigate complex installation processes effortlessly ensuring seamless integration new appliances existing kitchen layouts seamlessly integrated harmoniously coexisting together beautifully enhancing overall living experiences enjoyed daily basis moving forward