How To Attach Ring Doorbell Without Screws

(Many of the links in this article redirect to a specific reviewed product. Your purchase of these products through affiliate links helps to generate commission for Storables.com, at no extra cost. Learn more)

Introduction

The Ring Doorbell is a popular smart home device that adds an extra layer of security to your home. It allows you to monitor your front door and receive notifications on your smartphone whenever someone is at your doorstep. However, one common challenge many users face is how to attach the Ring Doorbell without screws.

While the traditional method of attaching the Ring Doorbell involves drilling holes and using screws, there are alternative methods you can explore that offer a screw-free installation. These methods not only save you the hassle of drilling into your walls or door frame but also allow for easier removal or repositioning of the Doorbell if needed.

In this article, we will explore four different methods for attaching your Ring Doorbell without screws. Whether you are renting a property and cannot make permanent modifications or simply prefer a more flexible installation option, these methods will provide you with alternatives for securing your Ring Doorbell.

Method 1: Using Adhesive Mounting Tape

One of the easiest and most convenient ways to attach your Ring Doorbell without screws is by using adhesive mounting tape. This method requires no drilling or permanent modifications to your door or wall.

Here’s a step-by-step guide on how to attach your Ring Doorbell using adhesive mounting tape:

1. Clean the Surface: Start by cleaning the area where you plan to mount the Doorbell. Use a mild cleaner to remove any dirt, dust, or grease that may affect the adhesive’s grip.
2. Prepare the Mounting Tape: Cut the adhesive mounting tape into appropriate lengths for the back of your Ring Doorbell. Make sure to use a strong adhesive suitable for outdoor use.
3. Apply the Tape: Remove the protective film from one side of the mounting tape and firmly press it onto the back of the Doorbell. Ensure that the tape covers the entire back surface evenly.
4. Position the Doorbell: Decide on the desired location for your Ring Doorbell and hold it against the door or wall. Make sure it is level and align it according to your preference.
5. Attach the Doorbell: Remove the protective film from the other side of the mounting tape and carefully press the Doorbell against the surface. Apply firm pressure to ensure a secure bond.
6. Test the Attachment: Gently tug on the Doorbell to ensure it is firmly attached. Give it a few minutes to set and then test its stability by pressing on it lightly.

It’s important to note that the adhesive mounting tape method may not be suitable for all surfaces, especially those with uneven or textured surfaces. Additionally, extreme weather conditions or high temperatures may affect the adhesive’s strength. Regularly inspect the attachment and reapply the tape if necessary to maintain a secure installation.

Using adhesive mounting tape provides a non-invasive and temporary solution for attaching your Ring Doorbell without screws. It allows for easy removal and repositioning, making it an ideal choice for renters or those who frequently rearrange their smart home setup.

Method 2: Using Velcro Strips

If you’re looking for a removable and reusable method to attach your Ring Doorbell without screws, using Velcro strips is a great option. Velcro strips provide a secure hold while giving you the flexibility to remove or reposition the Doorbell as needed.

Here’s a step-by-step guide on how to attach your Ring Doorbell using Velcro strips:

1. Clean the Surface: Start by cleaning the area where you plan to mount the Ring Doorbell. Use a mild cleaner to remove any dirt, dust, or grease that may affect the adhesion of the Velcro strips.
2. Prepare the Velcro Strips: Cut the Velcro strips into appropriate lengths for attaching the Doorbell to the surface. Ensure that you have both the hook and loop sides of the Velcro.
3. Attach the Strips: Remove the backing from one side of the hook Velcro strip and press it firmly onto the back of the Doorbell. Repeat the same process with the loop Velcro strip, applying it to the desired mounting location.
4. Position the Doorbell: Align the Doorbell with the mounted Velcro strip on the surface. Make sure it is level and positioned according to your preference.
5. Secure the Doorbell: Press the Doorbell against the Velcro strip on the surface, allowing the hooks and loops to interlock and securely hold the device in place.
6. Test the Attachment: Give the Doorbell a gentle tug to ensure it is securely attached. Check its stability and adjust if needed.

Velcro strips are a versatile option that allows for easy removal and reattachment of your Ring Doorbell without causing any damage to your door or wall. They provide a strong hold and can withstand regular use, making them an ideal choice for those who prefer a temporary but secure installation.

Additionally, using Velcro strips allows you to easily remove the Doorbell for charging or maintenance, without the need to unscrew it from the wall. Just detach the Doorbell from the Velcro and reattach it when you’re ready.

However, keep in mind that extreme weather conditions or high temperatures may affect the adhesion of the Velcro. Regularly inspect the attachment and replace the Velcro strips if they start to lose their grip.

You can use strong double-sided adhesive tape to attach your Ring Doorbell without screws. Make sure to clean the surface thoroughly before applying the tape for a secure hold.

Method 3: Using Command Strips

If you’re looking for a reliable and damage-free method to attach your Ring Doorbell without screws, consider using Command Strips. Command Strips offer a strong hold and easy removal without leaving any residue or damage on your door or wall.

Here’s a step-by-step guide on how to attach your Ring Doorbell using Command Strips:

1. Clean the Surface: Start by cleaning the area where you plan to mount the Ring Doorbell. Use a mild cleaner to remove any dirt, dust, or grease that may affect the adhesion of the Command Strips.
2. Prepare the Command Strips: Remove one side of the Command Strip from its backing and attach it to the designated spot on the back of the Doorbell. Repeat the process for the remaining Command Strips.
3. Position the Doorbell: Align the Doorbell with the mounted Command Strips on the surface. Make sure it is level and positioned according to your preference.
4. Secure the Doorbell: Press the Doorbell against the Command Strips, ensuring they securely adhere to the surface.
5. Hold and Wait: Apply firm pressure on the Doorbell for about 30 seconds to ensure a strong bond between the Command Strips and the surface.
6. Test the Attachment: Give the Doorbell a gentle tug to check if it is securely attached. Verify its stability and adjust if needed.

Command Strips are designed to be removable without causing any damage or leaving residue behind. When you need to remove the Doorbell, simply peel off the Command Strips from the surface, following the removal instructions provided by the manufacturer.

It’s important to note that Command Strips have weight limits, so make sure to use the appropriate size and number of strips based on the weight of your Ring Doorbell model. Regularly check the adhesive strength of the Command Strips and replace them if they become loose or weakened.

By utilizing Command Strips, you can enjoy a secure and hassle-free attachment of your Ring Doorbell without the need for screws, making it a great option for renters or those who prefer a non-permanent installation.

Method 4: Using a Mounting Bracket

If you’re looking for a more secure and permanent method to attach your Ring Doorbell without screws, using a mounting bracket is a reliable option. A mounting bracket provides a sturdy base for your Doorbell and allows for easy installation.

Here’s a step-by-step guide on how to attach your Ring Doorbell using a mounting bracket:

1. Choose a Mounting Location: Select a suitable location for your Ring Doorbell. Ensure that it has a flat and stable surface and is easily accessible for wiring.
2. Attach the Mounting Bracket: Position the mounting bracket on the chosen location and mark the holes for the screws. Use a drill and appropriate screws to securely attach the bracket to the surface.
3. Prepare the Doorbell: Remove the cover of your Ring Doorbell and locate the screw holes on the back. Ensure that the wiring is properly connected according to the manufacturer’s instructions.
4. Align and Install: Align the screw holes on the Doorbell with the corresponding holes on the mounting bracket. Insert screws through the holes and tighten them to secure the Doorbell to the bracket.
5. Test the Installation: Once the Doorbell is attached to the mounting bracket, test its stability by gently tugging on it. Verify that it is securely in place and properly functioning.

Using a mounting bracket provides a secure and long-lasting installation for your Ring Doorbell. It ensures that your device is properly positioned and offers stability even in harsh weather conditions.

Keep in mind that this method requires drilling holes in your wall or door frame, which may not be suitable for those who prefer a non-permanent or temporary installation. Also, ensure that you follow the manufacturer’s instructions and guidelines when using a mounting bracket.

This method is ideal for homeowners who want a reliable and secure attachment of their Ring Doorbell without relying on adhesives or removable methods. It offers peace of mind knowing that your device is firmly installed and can withstand the test of time.

Conclusion

Attaching your Ring Doorbell without screws is possible with various alternative methods that offer convenience, flexibility, and security. By exploring these methods, you can find the best solution for your needs, whether you’re a renter who can’t make permanent modifications or simply prefer a temporary installation.

We discussed four different methods:

• Using Adhesive Mounting Tape: This method offers a quick and easy installation without drilling or permanent modifications. However, it may not be suitable for all surfaces or extreme weather conditions.
• Using Velcro Strips: Velcro strips provide a removable and reusable option, allowing for easy removal and repositioning of the Doorbell. They offer a strong hold but may be affected by extreme temperatures.
• Using Command Strips: Command Strips provide a reliable and damage-free solution for attaching your Doorbell. They allow for easy removal without leaving any residue or damage behind.
• Using a Mounting Bracket: A mounting bracket offers a secure and permanent installation for your Doorbell. This method requires drilling holes, making it ideal for homeowners who desire stability and longevity.

When selecting the method that works best for you, consider factors such as the surface you’ll be attaching the Doorbell to, your need for flexibility or permanence, and the level of convenience you prefer. Always follow the manufacturer’s instructions for your specific Ring Doorbell model.

Remember to regularly inspect the attachment to ensure it remains secure and make any necessary adjustments or replacements if needed. Safety and functionality are key when it comes to securing your Ring Doorbell without screws.

Now that you have a better understanding of the different methods available, you can confidently choose the one that suits your needs and enjoy the added convenience and security that your Ring Doorbell brings to your home.