How To Turn On Elkay Water Fountain

(Many of the links in this article redirect to a specific reviewed product. Your purchase of these products through affiliate links helps to generate commission for Storables.com, at no extra cost. Learn more)

Introduction

Welcome to our guide on how to turn on an Elkay water fountain. Elkay is a well-known brand in the industry, offering high-quality water fountains that are perfect for both indoor and outdoor spaces. Whether you have just installed a new Elkay water fountain or are trying to figure out how to turn on an existing one, this article will provide you with a step-by-step guide to get your fountain up and running.

An Elkay water fountain is not only a functional addition to any space but also a stylish one. It provides instant access to clean and refreshing water for anyone who needs a quick sip. Before we get into the details of turning on the water fountain, let’s quickly go over the tools you will need and ensure that you have everything ready before starting the process.

Step 1: Gather the necessary tools

Before you begin, it’s important to gather all the necessary tools and equipment to ensure a smooth and hassle-free process. Here’s what you’ll need:

• Screwdriver: Depending on the model of your Elkay water fountain, you may need a screwdriver to access certain components or panels.
• Power source: Ensure that there is a nearby power source available for the water fountain to be plugged into. This could be a standard electrical outlet or a dedicated power supply specifically for the fountain.
• User manual: It’s always a good idea to have the user manual handy. This will provide you with specific instructions and troubleshooting tips for your particular model.

Once you have gathered all the necessary tools, you are ready to move on to the next step: locating the power switch.

Step 2: Locate the power switch

Locating the power switch is an essential step in turning on your Elkay water fountain. The power switch is usually located in a convenient and accessible place, but it may vary depending on the model. Here are a few common places to look for the power switch:

• Side panels: Some Elkay water fountains have side panels that can easily be opened or removed. Check the sides of the fountain to see if there are any panels that conceal the power switch.
• Underside: In certain models, the power switch may be located on the bottom or underside of the water fountain. You might have to turn the fountain upside down or look underneath to find the switch.
• Front or back panel: Many Elkay water fountains have a front or back panel that can be opened. Check these areas to see if the power switch is located behind one of them.

If you are still having trouble locating the power switch, refer to the user manual for your specific model. The manual will provide detailed instructions and illustrations to help you find the power switch.

Once you have successfully located the power switch, it’s time to move on to the next step: turning on the Elkay water fountain.

Step 3: Turn on the Elkay water fountain

Now that you have located the power switch, it’s time to turn on your Elkay water fountain. Follow these steps:

1. Ensure that the power switch is in the “off” position. This is usually indicated by the switch being in the downward or “off” position.
2. Plug the water fountain into a nearby power source. Make sure the power cord is securely connected and that the outlet is functioning.
3. Flip the power switch to the “on” position. This is usually done by pushing the switch upward or to the “on” position. You may hear a click or see a light indicator when the switch is turned on.

Once the power switch is turned on, the Elkay water fountain should start functioning. You may hear the sound of the water pump activating, and water should begin flowing from the fountain’s spout or bubbler.

If the water fountain does not turn on or there is no water flow, double-check that the power source is working and that the power switch is in the correct position. If the issue persists, refer to the user manual for troubleshooting tips or contact the Elkay customer support for further assistance.

With the water fountain turned on, you can now move on to the next step: adjusting the water flow and temperature (if applicable).

To turn on an Elkay water fountain, look for the power button or switch located near the bottom of the fountain. Press the button or flip the switch to activate the water flow.

Step 4: Adjust water flow and temperature (if applicable)

After successfully turning on your Elkay water fountain, you may have the option to adjust the water flow and temperature to your liking. Not all models will have this feature, so skip this step if it is not applicable to your fountain. If your fountain does have adjustable settings, here’s how you can make the necessary adjustments:

1. Refer to the user manual to identify the location of the water flow and temperature controls. These controls can usually be found near the spout or on the side of the fountain.
2. To adjust the water flow, locate the flow control knob or lever. Gradually turn the knob or move the lever to increase or decrease the water flow. You may need to experiment with different settings to find the flow that suits your preferences.
3. If your water fountain has a temperature control feature, look for the temperature control knob or button. Adjust the temperature according to your preference by turning the knob or pressing the button. Some models may offer options for cold, room temperature, or hot water.

It’s important to note that adjusting the water flow and temperature should be done carefully to avoid any potential damage to the fountain or discomfort to users. Follow the instructions provided in the user manual and make small, incremental changes until you achieve the desired flow and temperature.

Once you have made the necessary adjustments, it’s time to move on to the final step: testing the water fountain.

Step 5: Test the water fountain

After turning on the Elkay water fountain and making any necessary adjustments, it’s important to test the fountain to ensure that it is functioning properly. Follow these steps to test the water fountain:

1. Place a cup or your hand under the spout or bubbler of the water fountain.
2. Activate the water flow by pressing the corresponding button or pushing the bubbler down.
3. Observe the water flow and check for any issues such as weak flow, water leakage, or unusual sounds. If you notice any problems, refer to the troubleshooting section of the user manual or contact the Elkay customer support for assistance.
4. Check the water temperature if your fountain has a temperature control feature. Ensure that the water is at the desired temperature level.
5. Take a sip of the water to ensure that it tastes clean and fresh. If there are any unusual tastes or odors, it may indicate a problem with the filtration system or water source. Refer to the user manual for instructions on maintaining and cleaning the fountain.

If everything looks and tastes fine during the testing phase, congratulations! Your Elkay water fountain is now ready to provide refreshing drinks to anyone in need. Remember to periodically clean and maintain the fountain according to the manufacturer’s recommendations to ensure its longevity and optimal performance.

With these simple steps, you can confidently turn on and enjoy the benefits of your Elkay water fountain. Cheers to clean and refreshing hydration!

Conclusion

Turning on an Elkay water fountain is a straightforward process that enables you to enjoy clean, refreshing hydration in any space. By following the simple steps outlined in this guide, you can effortlessly activate your water fountain and make any necessary adjustments to suit your preferences. Whether it’s in an office, school, park, or any other setting, an Elkay water fountain provides a convenient and eco-friendly solution to quench your thirst.

Remember to gather the necessary tools, locate the power switch, and plug in the fountain before flipping the switch to the “on” position. If applicable, don’t forget to adjust the water flow and temperature to your liking, ensuring a personalized experience. Lastly, test the fountain by examining the water flow, checking the temperature, and tasting the water for freshness.

If you encounter any issues during the process or have concerns about the functionality of your Elkay water fountain, always refer to the user manual or seek assistance from the Elkay customer support team. Proper maintenance and occasional cleaning are essential to keep your water fountain in optimal condition, providing clean and great-tasting water for years to come.

Now that you have the knowledge and confidence to turn on your Elkay water fountain, go ahead and enjoy the benefits of having instant access to refreshing hydration. Stay hydrated, stay healthy, and enjoy the convenience and elegance of your Elkay water fountain!