How To Store Shark Flexstyle

(Many of the links in this article redirect to a specific reviewed product. Your purchase of these products through affiliate links helps to generate commission for Storables.com, at no extra cost. Learn more)

Introduction

When it comes to keeping your home clean and dust-free, the Shark Flexstyle vacuum is a reliable and powerful tool. But what happens when you’re done cleaning? Storing your Shark Flexstyle properly is crucial to maintain its performance and extend its lifespan.

Proper storage not only ensures that your vacuum stays in optimal condition but also makes it more convenient to access whenever you need it. In this article, we will guide you through the step-by-step process of storing your Shark Flexstyle vacuum to keep it in top shape.

Whether you’re storing your Shark Flexstyle for a short period or for an extended duration, these valuable tips will help you keep it clean, safe, and ready to go whenever you need to tackle another cleaning session.

Step 1: Clean the Shark Flexstyle

Before you can properly store your Shark Flexstyle vacuum, it’s essential to ensure that it is clean and free from any debris. Follow these steps to clean your vacuum thoroughly:

1. Unplug the vacuum: Before you start cleaning, always make sure that your Shark Flexstyle is unplugged to avoid any accidents.
2. Empty the dust cup: The first thing you want to do is empty the dust cup. Remove it from the vacuum by pressing the release button, then hold it over a trash bin and empty the contents.
3. Remove any tangled hair or debris: Inspect the brush roll and remove any tangled hair, fibers, or debris that may have accumulated. You can use a pair of scissors or your hands (while wearing protective gloves) to remove these obstructions.
4. Clean the brush roll: Once you have removed the tangled hair and debris, it’s time to clean the brush roll. Use a pair of scissors or a brush to gently remove any remaining debris. If necessary, you can also remove the brush roll for a more thorough cleaning.
5. Wipe down the exterior: Take a damp cloth or sponge and wipe down the exterior surfaces of the vacuum to remove any dirt or dust. Pay attention to any nooks and crannies that may collect debris.
6. Check the attachments: If your Shark Flexstyle comes with any attachments, take a moment to clean them as well. Run them under water or wipe them down with a damp cloth to remove any debris.

By following these steps, you can ensure that your Shark Flexstyle is clean and ready for storage. Once you’ve completed the cleaning process, you can move on to the next step of detaching and emptying the dust cup.

Step 2: Detach and Empty the Dust Cup

Detaching and emptying the dust cup is an important step in preparing your Shark Flexstyle vacuum for storage. Follow these instructions to ensure you do it correctly:

1. Turn off the vacuum: Before you begin, make sure the vacuum is turned off and unplugged to avoid any accidents.
2. Locate the dust cup: The dust cup is usually located at the front or bottom of the vacuum. Consult your vacuum’s user manual if you’re unsure.
3. Press the release button: Look for the release button on the dust cup and press it to detach it from the vacuum. This step may vary depending on the model of your Shark Flexstyle.
4. Empty the dust cup: Once the dust cup is detached, take it to a trash bin and empty the contents. Be sure to dispose of the debris properly.
5. Clean the dust cup: After emptying the dust cup, rinse it with water to remove any remaining dirt or residue. Let it dry completely before reattaching it to the vacuum.

By detaching and emptying the dust cup, you remove any accumulated dirt and ensure that your Shark Flexstyle is ready for storage. In the next step, we will discuss how to remove and clean the filters of your vacuum.

Store Shark Flexstyle by hanging it on a hook or hanger to prevent creasing and maintain its shape. Avoid folding or cramming it into a tight space to prevent damage to the fabric.

Step 3: Remove and Clean the Filters

To maintain the performance of your Shark Flexstyle vacuum, it’s important to regularly clean and maintain the filters. Follow these steps to remove and clean the filters:

1. Turn off the vacuum: Before you start, make sure the vacuum is turned off and unplugged.
2. Locate the filters: The Shark Flexstyle vacuum usually has two types of filters: a foam filter and a felt filter. Refer to your vacuum’s user manual to locate them.
3. Remove the foam filter: In most models, the foam filter is located inside the dust cup area. Gently pull it out and set it aside.
4. Remove the felt filter: The felt filter is usually located near the motor or in a separate compartment. Carefully remove it from its housing.
5. Clean the filters: Rinse both the foam and felt filters under warm water to remove any dirt and debris. Use your fingers to gently squeeze and rinse the filters until the water runs clear.
6. Let the filters dry: After cleaning, allow the filters to air dry completely. It’s important to ensure that they are completely dry before reassembling them.
7. Reinstall the filters: Once the filters are dry, place them back in their respective locations. Ensure they are properly seated and secured before continuing.

Regularly cleaning the filters of your Shark Flexstyle vacuum helps maintain suction power and ensures efficient performance. In the next step, we will discuss how to store your Shark Flexstyle properly.

Step 4: Store the Shark Flexstyle

Now that you have cleaned the Shark Flexstyle vacuum and its filters, it’s time to store it correctly. Follow these steps to ensure your Shark Flexstyle remains safe and protected during storage:

1. Select an appropriate storage location: Choose a dry and clean area for storing your vacuum. Avoid places with extreme temperatures or high humidity that can damage the vacuum.
2. Wrap the power cord: Start by wrapping the power cord neatly around the cord hooks or cord wrap features provided on the vacuum. This prevents the cord from tangling and getting damaged during storage.
3. Secure the accessories: If your Shark Flexstyle vacuum has any additional accessories or attachments, make sure they are stored securely. Wrap them individually or store them in a designated compartment to prevent loss or damage.
4. Cover the vacuum: To protect your Shark Flexstyle from dust and debris, consider using a vacuum storage bag or a breathable cover. This helps to keep the vacuum clean and free from dirt during storage.
5. Store in an upright position: It’s best to store the Shark Flexstyle vacuum in an upright position to prevent damage to the brush roll and other components. If possible, use the provided storage hook or stand to keep it upright.
6. Check on the vacuum periodically: Occasionally, check on your stored Shark Flexstyle to ensure it remains in good condition. Inspect for any signs of damage or pests and address them if necessary.

By following these steps, you can store your Shark Flexstyle vacuum properly and retain its performance for future use.

Conclusion

Properly storing your Shark Flexstyle vacuum is essential for maintaining its performance and extending its lifespan. By following the steps outlined in this article, you can ensure that your vacuum remains in excellent condition and is ready for use whenever you need it.

Start by cleaning the vacuum thoroughly, ensuring that the dust cup is empty and the filters are clean. Detaching and emptying the dust cup removes any debris, while cleaning the filters maintains suction power. Once the cleaning process is complete, it’s time to store the Shark Flexstyle correctly.

Select a suitable storage location that is dry and free from extreme temperatures or humidity. Take care to wrap the power cord neatly and secure any accessories to prevent damage. Consider using a vacuum storage bag or cover to protect the vacuum from dust and debris.

Remember to store the Shark Flexstyle in an upright position to prevent damage to the brush roll and components. Check on the vacuum periodically to ensure it’s in good condition and address any issues promptly.

By following these steps, you can ensure that your Shark Flexstyle vacuum remains in optimal condition, allowing you to maintain a clean and dust-free home for years to come.