How Do I Reset My Blink Outdoor Camera

(Many of the links in this article redirect to a specific reviewed product. Your purchase of these products through affiliate links helps to generate commission for Storables.com, at no extra cost. Learn more)

Introduction

Welcome to the world of home security and surveillance! In this fast-paced and ever-changing world, it’s important to ensure the safety of our homes and loved ones. Luckily, with advancements in technology, we have access to a wide range of home security systems to provide us with peace of mind.

One popular and highly effective option is the Blink Outdoor Camera. With its easy installation process, wireless connectivity, and motion detection capabilities, it’s a top choice for many homeowners. However, there may come a time when you need to reset your Blink Outdoor Camera for various reasons, such as troubleshooting issues or changing your home network.

In this article, we will walk you through the process of resetting your Blink Outdoor Camera. We will guide you step by step, ensuring that you can easily navigate through the procedure. So, without further ado, let’s dive in and explore how you can reset your Blink Outdoor Camera.

Step 1: Checking the Camera Status

Before proceeding with any troubleshooting steps or reset procedures, it’s essential to check the status of your Blink Outdoor Camera. This will help you identify any potential issues and determine whether a reset is actually needed.

To check the camera status:

1. Make sure the camera is powered on and connected to a steady power source. Check the power cable and ensure it’s securely plugged in.
2. Check the Wi-Fi connection of the camera. Ensure that it’s connected to your home network and has a stable internet connection. If needed, move the camera closer to the Wi-Fi router to ensure a strong signal.
3. Inspect the camera’s LED light. If it’s solid blue, it indicates that the camera is properly connected and functioning. If the LED light is blinking red, it could indicate low battery or network connectivity issues.
4. Verify if the camera lens is clean and free from obstructions. Dust or physical obstructions can impact the camera’s functionality.
5. Ensure that the Blink app on your smartphone is up to date. A outdated app version could cause compatibility issues and affect the camera’s performance.

If you have completed these checks and everything seems to be in order, then a reset may not be necessary. However, if you are experiencing persistent issues with your Blink Outdoor Camera, it’s time to move on to the next step and power cycle the camera.

Step 2: Power Cycling the Blink Outdoor Camera

Power cycling is a simple yet effective technique to troubleshoot many electronic devices, including the Blink Outdoor Camera. It involves turning off the camera, disconnecting it from the power source, and then reconnecting it after a brief period. This process helps refresh the camera’s internal systems and resolves minor connectivity issues.

To power cycle your Blink Outdoor Camera, follow these steps:

1. Locate the power cable connected to the camera and unplug it from the power source or outlet.
2. Wait for at least 10 seconds to ensure that the camera fully powers down.
3. After the waiting period, plug the power cable back into the camera and ensure it’s securely connected.
4. Wait for the camera to power up completely. You will know it’s ready when the LED light stops blinking and turns solid blue.
5. Check the camera’s functionality by accessing the Blink app on your smartphone. Monitor the live feed or perform any desired actions to ensure that the camera is working properly.

Power cycling the Blink Outdoor Camera often resolves minor issues and restores its functionality. However, if the camera continues to exhibit problems, it may be necessary to perform a reset through the Blink app, which we will explain in the next step.

To reset your Blink Outdoor camera, press and hold the reset button on the back of the camera for 10 seconds. The LED light will flash blue, indicating that the reset is complete.

Step 3: Resetting the Blink Outdoor Camera through the App

If power cycling doesn’t resolve the issues with your Blink Outdoor Camera, the next step is to perform a reset through the Blink app. Resetting the camera will erase all its settings and configurations, allowing you to start fresh and re-establish a connection with your home network.

To reset your Blink Outdoor Camera through the app, follow these instructions:

1. Open the Blink app on your smartphone and log in to your account.
2. Select the desired Blink Outdoor Camera from the list of devices.
3. Go to the Camera Settings or Device Settings option, usually accessible through a gear or cog icon.
4. Look for the option to Reset or Factory Reset the camera. The location may vary depending on the app version, but it’s typically found under Advanced Settings or Device Info.
5. Confirm your decision to reset the camera when prompted. Keep in mind that this action will erase all settings, recorded footage, and configurations associated with the camera.
6. Wait for the reset process to complete. This can take a few minutes.
7. Once the reset is finished, go through the setup process again to connect the camera to your home network.

After performing a reset, your Blink Outdoor Camera should be ready to use. Remember to set up any desired settings, such as motion detection sensitivity and recording preferences, to tailor it to your specific needs.

If the camera still doesn’t function properly or if you encounter any difficulties during the reset process, it may be necessary to perform a hard reset, which is explained in the next step.

Step 4: Performing a Hard Reset on the Blink Outdoor Camera

If power cycling and resetting through the Blink app didn’t resolve the issues with your Blink Outdoor Camera, a hard reset might be necessary. A hard reset is a more extensive reset that will completely restore the camera to its factory settings, erasing all configurations and connections.

Before proceeding with a hard reset, keep in mind that this action is irreversible and will delete all your camera’s settings, recorded footage, and configurations. Make sure you have a backup of any important data before proceeding.

To perform a hard reset on your Blink Outdoor Camera, follow these steps:

1. Locate the reset button or hole on the back or bottom of the camera. It’s usually a small pinhole marked with “Reset.”
2. Using a paperclip or a similar tool, press and hold the reset button for at least 20 seconds.
3. While still holding the reset button, unplug the camera from the power source.
4. Continue holding the reset button for another 20 seconds.
5. Plug the camera back into the power source while keeping the reset button pressed.
6. Hold the reset button for an additional 20 seconds.
7. Release the reset button and wait for the camera to restart. This process may take a couple of minutes.
8. Once the camera has restarted, go through the initial setup process to connect it to your home network again.

By performing a hard reset, you will completely restore your Blink Outdoor Camera to its factory settings. This should resolve any persistent issues and allow you to start fresh with a clean setup.

However, if the camera still doesn’t function properly even after a hard reset, it may indicate a hardware malfunction. In such cases, it’s advisable to reach out to the Blink support team for further assistance.

Conclusion

Resetting a Blink Outdoor Camera can be a valuable troubleshooting tool when faced with connectivity or functionality issues. Throughout this article, we have guided you through the steps needed to reset your Blink Outdoor Camera, starting with checking the camera’s status, power cycling it, resetting through the Blink app, and performing a hard reset if necessary.

Remember, before diving into a reset, make sure to check the camera’s status, power source, and connectivity. Power cycling is often an effective first step, as it refreshes the camera’s internal systems. If issues persist, resetting through the Blink app can help resolve any software-related problems. In rare cases, a hard reset may be necessary to completely restore the camera to its factory settings.

By following these steps, you can ensure that your Blink Outdoor Camera is functioning optimally and providing you with the security and peace of mind you desire. As technology continues to advance, it’s important to stay updated on the latest troubleshooting techniques and utilize the resources available to maintain the efficiency of your home security system.

If you encounter any difficulties during the reset process or experience persistent issues with your Blink Outdoor Camera, don’t hesitate to reach out to Blink’s support team for further assistance. They have the expertise to address any concerns and provide you with the necessary guidance.

We hope this article has been informative and helpful in guiding you through the process of resetting your Blink Outdoor Camera. Remember, a well-maintained and properly reset camera ensures that you can enjoy the benefits of a reliable home security system.