How To Make A Tic Tac Toe Toilet Paper Holder

(Many of the links in this article redirect to a specific reviewed product. Your purchase of these products through affiliate links helps to generate commission for Storables.com, at no extra cost. Learn more)

Introduction

Are you looking for a fun and unique way to store your toilet paper? Look no further than a tic tac toe toilet paper holder! This creative and playful design will not only provide a practical solution for holding your toilet paper rolls, but will also add a touch of whimsy to your bathroom decor.

In this article, we will guide you through the step-by-step process of creating your very own tic tac toe toilet paper holder. With just a few materials and some basic woodworking skills, you can bring this fun and functional piece to life.

Not only will this DIY project help you keep your bathroom organized, but it can also be a great conversation starter when guests visit your home. So, grab your tools and let’s get started!

Materials Needed

Before you begin, gather the following materials:

• 1 piece of wood, preferably pine or plywood, measuring 12×12 inches
• Sandpaper (medium and fine grit)
• Paint or stain in your desired color
• Paintbrush or foam brush
• Measuring tape
• Pencil
• Saw (circular saw or miter saw)
• Drill with drill bits
• Wood glue
• Toilet paper holder rod
• Screws
• Hanging hardware (if needed)

These materials can be easily found at your local hardware or home improvement store. Make sure to choose a wood piece that is sturdy enough to hold the weight of multiple toilet paper rolls. Additionally, select a paint or stain color that complements your bathroom decor.

Once you have gathered all the materials, you are ready to move on to the next step – measuring and cutting the wood for your tic tac toe toilet paper holder.

Step 1: Measure and Cut the Wood

Start by measuring and marking the wood according to the following dimensions:

• Cut two strips of wood measuring 12 inches in length and 2 inches in width.
• Cut two strips of wood measuring 10 inches in length and 2 inches in width.

Using a measuring tape and pencil, carefully mark the measurements on the wood. Double-check your measurements to ensure accuracy.

Once you have marked the wood, use a saw (circular saw or miter saw) to cut along the marked lines. Take your time and use caution while operating the saw. If needed, you can use clamps to secure the wood in place during the cutting process.

After cutting the wood, you should have four strips with the specified dimensions. These will serve as the base and sides of your tic tac toe toilet paper holder.

With the wood pieces cut and ready, it’s time to move on to the next step – sanding and painting the wood.

Step 2: Sand and Paint the Wood

Before assembling the tic tac toe toilet paper holder, it’s important to sand the wood to ensure a smooth and polished finish. Follow these steps:

1. Start with medium-grit sandpaper (about 120 grit) and sand each piece of wood thoroughly. Pay close attention to the edges and corners, as they tend to be rougher.
2. Once you’ve sanded the wood with medium-grit sandpaper, switch to fine-grit sandpaper (about 220 grit) and sand the wood again. This will help achieve a smoother surface.
3. After sanding, wipe away any dust or debris with a clean cloth or tack cloth.

Now that the wood is sanded and smooth, it’s time to add some color! Choose a paint or stain color that matches your bathroom decor or go for a bold contrast. Here’s how to paint the wood:

1. Use a paintbrush or foam brush to apply an even coat of paint or stain to each piece of wood. Make sure to cover the front, back, and sides.
2. Allow the first coat to dry completely according to the manufacturer’s instructions.
3. If desired, apply a second coat of paint or stain for a more vibrant or opaque finish. Allow it to dry completely as well.

Once the paint or stain has dried, you’ll have beautifully colored wood pieces ready for the next step – attaching the tic tac toe design.

When making a Tic Tac Toe Toilet Paper Holder, ensure that the slots for the toilet paper rolls are evenly spaced to allow for easy access and a balanced appearance.

Step 3: Attach the Tic Tac Toe Design

Now that you have your painted wood pieces, it’s time to add the tic tac toe design. This will give your toilet paper holder a playful and interactive element. Follow these steps:

1. Using a pencil and ruler, create a tic tac toe grid on one of the 12×12-inch wood pieces. Divide the piece into nine equal squares, measuring approximately 4×4 inches each.
2. Once you have drawn the grid, decide on a pattern or design for the X’s and O’s. You can use pre-cut wooden or plastic letters, or you can paint them directly onto the wood using stencils.
3. If using pre-cut letters, apply a small amount of wood glue to the back of each letter and press it firmly onto the appropriate square of the tic tac toe grid.
4. If painting the letters, use a fine-tip brush or a stencil to carefully paint the X’s and O’s onto the wood. Allow the paint to dry completely before moving on.

Once the tic tac toe design is attached and dry, you’re ready for the next step – attaching the toilet paper holder itself.

Step 4: Attach the Toilet Paper Holder

Now that your tic tac toe design is in place, it’s time to attach the toilet paper holder rod. Follow these steps:

1. Measure and mark the center of one of the 10-inch wood strips.
2. Using a drill with an appropriate drill bit, drill a hole at the marked center point. The hole should be slightly larger than the diameter of the toilet paper holder rod.
3. Apply a small amount of wood glue to the inside of the drilled hole.
4. Insert one end of the toilet paper holder rod into the hole and press it firmly into the wood, ensuring it is securely in place.
5. Allow the wood glue to dry completely, following the manufacturer’s instructions.
6. If desired, you can reinforce the attachment by drilling screws into the sides of the wood strips, securing the toilet paper holder rod.

With the toilet paper holder rod attached, your tic tac toe toilet paper holder is almost complete. Now, let’s move on to the final step – hanging or placing the holder in your desired location.

Step 5: Hang or Place the Holder in the Desired Location

Now that your tic tac toe toilet paper holder is fully assembled, it’s time to find the perfect spot for it in your bathroom. Follow these steps to hang or place the holder:

1. If you plan to hang the holder on the wall, use a measuring tape and pencil to mark the desired location. Make sure it is at a convenient height and easily accessible.
2. Install the appropriate hanging hardware according to the type of wall you have (e.g., wall anchors, screws, adhesive hooks).
3. Hang the tic tac toe toilet paper holder onto the installed hardware, ensuring it is level.
4. If you prefer not to hang the holder, you can simply place it on a countertop, vanity, or shelf in your bathroom.
5. Add toilet paper rolls to the holder, strategically placing X’s and O’s in the tic tac toe grid for added visual appeal.

With the tic tac toe toilet paper holder in place, you can now enjoy its functionality and playful design. It’s a great way to add a unique touch to your bathroom decor while keeping your toilet paper rolls organized and easily accessible.

Remember to regularly refill the holder with fresh toilet paper rolls and enjoy the fun and functionality it brings to your bathroom!

Conclusion

Congratulations on creating your very own tic tac toe toilet paper holder! This DIY project has provided you with a unique and playful way to store your toilet paper rolls while adding a touch of whimsy to your bathroom decor.

By measuring and cutting the wood, sanding and painting it, attaching the tic tac toe design, and securing the toilet paper holder rod, you have created a functional and eye-catching piece. Whether you choose to hang it on the wall or place it on a countertop, your tic tac toe toilet paper holder is sure to be a conversation starter with your guests.

Remember to regularly refill the holder with toilet paper rolls and rearrange the X’s and O’s in the tic tac toe grid for a fun and interactive visual element. You can even involve your family and friends in a friendly game of tic tac toe while in the bathroom!

We hope you enjoyed this DIY project and that your tic tac toe toilet paper holder brings a smile to your face every time you reach for a roll. Have fun with your new creation and continue exploring your creativity through other crafts and projects.

Happy crafting and happy toileting!