How To Clean Stove Burners With Baking Soda

(Many of the links in this article redirect to a specific reviewed product. Your purchase of these products through affiliate links helps to generate commission for Storables.com, at no extra cost. Learn more)

Introduction

Cleaning stove burners can be a daunting task. Over time, these burners accumulate grease, food residue, and stubborn stains, causing them to lose their efficiency and potentially emit unpleasant odors. However, with the right materials and a simple cleaning process, you can transform your dirty stove burners into sparkling clean ones.

This article will guide you through a step-by-step process on how to clean stove burners using a common household ingredient – baking soda. Baking soda is a versatile and effective cleaning agent that can tackle even the toughest stains. By following these instructions, you can restore the shine and functionality of your stove burners, all without using harsh chemicals.

Before we begin, it’s important to gather the necessary materials. Here’s what you’ll need:

Materials Needed

• Baking soda
• Dish soap
• Warm water
• A small bowl or container
• A sponge or scrub brush
• A clean cloth or paper towel

Now that you have everything you need, let’s get started with the cleaning process.

Materials Needed

• Baking soda: Baking soda, or sodium bicarbonate, is a natural cleaning agent that is gentle yet effective in removing stains and grease.
• Dish soap: Choose a dish soap that is mild and non-abrasive to avoid damaging the burners.
• Warm water: Warm water will help dissolve the baking soda and loosen the grime on the burners.
• A small bowl or container: You will need a container to mix the baking soda paste.
• A sponge or scrub brush: A sponge or scrub brush will be used to apply the baking soda paste and scrub away the dirt and stains.
• A clean cloth or paper towel: A clean cloth or paper towel will be used to wipe away the paste and dry the burners after cleaning.

These materials are readily available in most households, making it convenient and cost-effective to clean your stove burners using baking soda.

Now that you have gathered all the necessary materials, let’s move on to the step-by-step process of cleaning your stove burners with baking soda.

Step 1: Removing the Burners

Before you begin cleaning the stove burners, it’s important to ensure your safety. Make sure that the stove is turned off and cool to the touch. If you had recently used the stove, allow it to cool down completely before proceeding.

To remove the burners, carefully lift or pull them out from their designated spots on the stovetop. The method of removal may vary depending on the type of stove you have. Some burners may be attached with screws or clips, while others simply lift out.

If you are unsure about how to remove the burners, refer to your stove’s user manual for specific instructions. Alternatively, you can search for the make and model of your stove online to find tutorials or videos that demonstrate the removal process.

Once you have successfully removed the burners, place them on a flat and stable surface to begin the cleaning process. This can be a countertop or sink, as long as it offers a comfortable working space.

With the burners safely removed, we can now move on to the next step of creating a baking soda paste.

Step 2: Creating a Baking Soda Paste

Now that the burners are removed and ready for cleaning, the next step is to create a baking soda paste that will effectively remove grease and stains.

In a small bowl or container, combine baking soda and a few drops of dish soap. The dish soap will help enhance the cleaning power of the baking soda. Gradually add warm water to the mixture and stir well until you achieve a smooth and thick paste-like consistency.

The baking soda paste is a powerful cleaning agent that will help break down tough stains and grease buildup on the burners. It is also non-abrasive, making it safe to use on various stove burner materials.

Once you have created the baking soda paste, you are ready to move on to the next step of actually cleaning the stove burners.

To clean stove burners with baking soda, make a paste with baking soda and water, apply it to the burners, let it sit for 20 minutes, then scrub with a sponge and rinse.

Step 3: Cleaning the Stove Burners

With the baking soda paste ready, it’s time to start cleaning the stove burners.

Take a small amount of the baking soda paste and apply it directly onto the surface of each burner. Make sure to cover the entire surface, focusing on areas with stubborn stains or grease buildup.

Using a sponge or scrub brush, gently scrub the baking soda paste into the burner surface in a circular motion. The abrasive properties of the baking soda will help loosen the dirt and grime, while the dish soap will work to break down any grease.

Continue scrubbing until you begin to see the dirt and stains lifting from the burner surface. Pay extra attention to the areas around the burner holes, as debris tends to accumulate there.

If you encounter particularly tough stains, you can let the baking soda paste sit on the burner surface for a few minutes to allow it to penetrate and break down the grime further.

As you clean each burner, remember to rinse the sponge or scrub brush regularly to remove the loosened dirt and prevent cross-contamination.

Once you have thoroughly scrubbed each burner, it’s time to move on to the next step of soaking the burners.

Step 4: Soaking the Burners

After cleaning the stove burners with the baking soda paste, the next step involves soaking the burners to further loosen any remaining dirt and stains.

Create a mixture of warm water and dish soap in a sink or a basin. The amount of dish soap you use will depend on the size of your sink or basin, but a few generous squeezes should be sufficient.

Submerge the cleaned burners in the warm soapy water, making sure they are fully covered. Allow them to soak for around 15-30 minutes. This soaking process will help soften any remaining grime and make it easier to remove.

During this time, you can take the opportunity to clean the burner knobs, control panel, or any other removable parts of the stove using the same baking soda paste that you used earlier. Simply apply a small amount of the paste, scrub gently, and then rinse thoroughly with water.

After the soak, remove the burners from the soapy water and give them a gentle scrub to further loosen any stubborn dirt. Rinse them with clean water to remove any soap residue.

Now that the burners are thoroughly soaked and rinsed, we can move on to the next step of scrubbing and rinsing.

Step 5: Scrubbing and Rinsing

After soaking the burners, it’s time to give them a final scrubbing to remove any remaining dirt and residue.

Using a sponge or scrub brush, gently scrub the burners once again. Pay close attention to any areas where stubborn stains or grease may still be present. The combination of the baking soda paste and the soak should have loosened most of the grime, making it easier to remove at this stage.

Rinse the scrubbed burners with clean water to wash away the loosened dirt and residue. You can do this under running water or by using a basin filled with water. Make sure to rinse the burners thoroughly to ensure they are free from any cleaning agents.

After rinsing, inspect the burners to ensure that they are clean and free from any remaining stains or residue. If necessary, repeat the scrubbing and rinsing process until the burners look sparkling clean.

Once you are satisfied with the cleanliness of the burners, it’s time to move on to the final step of drying and reassembling.

Step 6: Drying and Reassembling

After scrubbing and rinsing the stove burners, it’s crucial to ensure that they are completely dry before reassembling them into the stove.

Using a clean cloth or paper towel, carefully dry each burner, making sure to remove any excess water. Pay special attention to the burner holes and crevices to ensure they are completely dry, as any moisture left behind can lead to rust or damage.

Once the burners are thoroughly dried, you can reassemble them back into their designated spots on the stovetop. Ensure they are positioned correctly and securely in place.

Before turning on the stove, take a moment to clean the external surfaces and the control panel with a damp cloth to remove any residual baking soda or dirt. Wipe them dry afterwards to prevent water damage or streaks.

Finally, it’s time to turn on the stove and test the burners to ensure they are working properly. You’ll notice that the clean burners not only enhance the appearance of your stove, but also improve its overall functionality and efficiency.

By following these six easy steps, you can effectively clean your stove burners using baking soda. Not only is baking soda a natural and safe cleaning agent, but it is also readily available in most households, making it a convenient and cost-effective solution.

Regularly maintaining and cleaning your stove burners will not only extend their lifespan but also contribute to a healthier and more pleasant cooking experience. So, don’t wait any longer – give your stove burners the attention they deserve and enjoy cooking on a sparkling clean stovetop!

Do you have any other cleaning tips or tricks? Share them with us in the comments below!

Sources:
– https://www.goodhousekeeping.com/home/cleaning/tips/a32776/how-to-clean-stove-burners/
– https://blog.mollymaid.com/2021/02/15/how-to-clean-stove-burners/

Conclusion

Cleaning stove burners is essential to maintain their efficiency and prolong their lifespan. With the help of baking soda, you can easily and effectively remove grease, stains, and dirt from your stove burners without the use of harsh chemicals.

In this article, we discussed a step-by-step process for cleaning stove burners using baking soda. We learned how to remove the burners, create a baking soda paste, clean the burners, soak them, scrub and rinse, and finally, dry and reassemble them. Following these steps will leave your stove burners sparkling clean and ready for use.

Baking soda is a versatile cleaning agent that is not only safe but also cost-effective. It effortlessly removes tough stains and grease buildup, restoring the shine and functionality of your stove burners. Additionally, by using baking soda, you avoid exposing yourself and your family to harsh chemicals that may be present in commercial cleaning products.

Remember to prioritize safety when cleaning stove burners. Always ensure that the stove is turned off and cooled down before removing the burners. Also, make sure to follow the specific instructions for your stove model as outlined in the user manual.

Regular cleaning and maintenance of your stove burners will not only keep them looking their best but also contribute to a healthier cooking environment. So, take the time to clean your stove burners using baking soda regularly, and enjoy a clean and efficient cooking experience.

We hope that this article has provided you with valuable insights and practical tips for cleaning your stove burners. If you have any other cleaning tips or tricks, feel free to share them with us in the comments below!

Sources:
– https://www.goodhousekeeping.com/home/cleaning/tips/a32776/how-to-clean-stove-burners/
– https://blog.mollymaid.com/2021/02/15/how-to-clean-stove-burners/