How To Fix The Error Code PF For LG Dryer

(Many of the links in this article redirect to a specific reviewed product. Your purchase of these products through affiliate links helps to generate commission for Storables.com, at no extra cost. Learn more)

Are you facing the dreaded PF error code on your LG dryer? Don’t worry, we’ve got you covered!

Power failures can be quite frustrating, especially when they interrupt your laundry routine. If your LG dryer is displaying the PF error code, it means that a power failure or power outage has occurred. But fear not, for we are here to guide you through the steps to fix this issue and get your dryer up and running again.

How to Fix the PF Error Code

When the PF error code appears on your LG dryer, follow these simple steps to resolve the issue:

1. Check the Power Supply: Ensure that the power cord is securely connected to both the dryer and the electrical outlet. Make sure there is no damage to the power cord or the outlet.
2. Reset the Dryer: Unplug the dryer from the electrical outlet and wait for approximately one minute. Then, plug it back in and try running a cycle. This simple reset might be all you need to clear the error code.
3. Ensure Proper Voltage: Make sure your dryer is receiving the correct voltage. Most electric dryers require a 240-volt power supply. If the voltage is incorrect, consult a professional electrician to rectify the issue.
4. Check the Breaker: Inspect the circuit breaker or fuse box. If the circuit breaker has tripped or a fuse has blown, reset the breaker or replace the fuse to restore power to the dryer.
5. Consider a Dedicated Circuit: If you frequently experience power failures or PF errors, it might be beneficial to have a dedicated circuit installed specifically for your dryer. This can help prevent power fluctuations or overloading that can trigger the error code.

Understanding the PF Error Code

The PF error code stands for “Power Failure,” indicating that the dryer has detected a loss of electrical power. This can be caused by various reasons, such as a power outage, voltage irregularities, or issues with the power supply to the dryer.

When a power failure occurs, the dryer automatically stops running and the PF error code is displayed on the control panel. This is a safety feature designed to protect your appliance from potential damage that could result from surges or drops in power.

By displaying the PF error code, your LG dryer is informing you that it has detected a power interruption and needs attention.

Check the power supply and make sure the dryer is plugged in securely. Reset the circuit breaker and ensure the vent is not blocked. If the issue persists, contact a professional for further assistance.

Conclusion

Dealing with a power failure and the accompanying PF error code on your LG dryer can be frustrating, but it’s usually a minor issue that can be resolved quickly. By following the troubleshooting steps outlined above, you should be able to get your dryer back to its normal working condition in no time.

If the problem persists or you encounter any other issues with your LG dryer, it’s always advisable to consult the manufacturer’s manual or seek assistance from a qualified technician.

Remember, tackling these minor setbacks is just a part of maintaining and caring for your appliances. Happy drying!