How To Put Together LG OLED TV Stand

(Many of the links in this article redirect to a specific reviewed product. Your purchase of these products through affiliate links helps to generate commission for Storables.com, at no extra cost. Learn more)

Introduction

Welcome to this comprehensive guide on how to put together the LG OLED TV stand! If you’ve recently purchased an LG OLED TV, you may be wondering how to properly assemble its stand to make the most of your viewing experience. This step-by-step tutorial will walk you through the entire process, ensuring a seamless and stable setup for your new entertainment centerpiece.

Before we dive into the assembly instructions, it’s important to note that the LG OLED TV stand is specifically designed to complement the sleek and modern aesthetic of LG OLED TVs. This stand provides a sturdy base, allowing you to securely place your TV on a flat surface without the need for wall mounting.

Whether you’re a tech-savvy enthusiast or a novice DIYer, assembling the LG OLED TV stand is a straightforward process that can be completed with a few basic tools. So, let’s gather our tools and materials before we begin!

Tools and Materials Needed

Before you start assembling the LG OLED TV stand, make sure you have the following tools and materials on hand:

• Phillips screwdriver
• Flathead screwdriver
• Allen wrench (usually included in the packaging)
• TV stand components (included in the packaging)
• User manual (included in the packaging)

Having these tools and materials readily available will ensure a smooth assembly process and help you avoid any unnecessary delays or frustrations. So, double-check your toolbox and let’s move on to the next step!

Step 1: Unboxing the LG OLED TV Stand

Now that you have gathered all the necessary tools and materials, it’s time to unbox the LG OLED TV stand. Follow these steps:

1. Locate the package containing the TV stand. It is typically labeled and separated from the other components.
2. Carefully open the package using a pair of scissors or a utility knife. Be cautious not to damage any of the contents inside.
3. Once the package is open, remove all the components and place them on a clean and spacious surface. Take your time to ensure that you have accounted for all the parts listed in the user manual.
4. Inspect each component for any signs of damage or defects. If you notice any issues, contact the retailer or manufacturer for assistance or replacement before proceeding with the assembly.

By following these steps, you have successfully unboxed the LG OLED TV stand and ensured that all the components are in proper condition. Now you can move on to the next step of the assembly process.

Step 2: Checking the Components

Now that you have unboxed the LG OLED TV stand, it’s important to carefully inspect each component before proceeding with the assembly process. Follow these steps:

1. Refer to the user manual for a detailed diagram or description of each component.
2. Compare the components you have with the illustrations or descriptions provided in the manual.
3. Check for any missing or damaged parts, such as screws, nuts, or support brackets.
4. If there are missing or damaged parts, reach out to the retailer or manufacturer to request replacements.

By checking the components, you can ensure that you have all the necessary parts for a successful assembly. This step will help you avoid any frustrations or delays that may arise from missing or damaged pieces. Once you have confirmed that all the components are present and in good condition, you can proceed to the next step of the assembly process.

Step 3: Assembling the Base

With all the components checked and ready, it’s time to start assembling the base of the LG OLED TV stand. Follow these steps:

1. Place the base plate on a flat and stable surface. Ensure that the plate faces upward, with the screw holes facing upwards as well.
2. Take the support brackets and attach them to the base plate using the provided screws. Use a Phillips screwdriver to tighten the screws securely.
3. Once the support brackets are attached, position the feet on the base plate according to the user manual’s instructions. Make sure they align with the indicated markers or grooves on the plate.
4. Insert the screws into the holes on the feet and tighten them with a Phillips screwdriver. Ensure that the feet are securely fastened to the base plate.
5. Double-check all the screws and fixings to ensure they are properly tightened and secure.

By following these steps, you have successfully assembled the base of the LG OLED TV stand. The sturdy and stable base will provide a solid foundation for your TV. Now that the base is complete, let’s move on to the next step in the assembly process.

When putting together the stand for your LG OLED TV, make sure to carefully follow the instructions provided in the manual. Double-check that all the parts are included before starting assembly, and take your time to ensure everything is securely fastened.

Step 4: Mounting the Stand Neck

Now that the base is assembled, it’s time to mount the stand neck onto the base of the LG OLED TV stand. Follow these steps:

1. Take the stand neck and align it with the mounting holes on the top of the base plate.
2. Insert the screws provided into the mounting holes and tighten them using a Phillips screwdriver. Make sure the stand neck is securely attached to the base plate.
3. Next, locate the groove or slot on the back of your LG OLED TV.
4. Align the stand bracket on the stand neck with the groove or slot on the TV.
5. Attach the stand bracket to the TV by inserting the included screws into the pre-drilled holes or slots on the TV.
6. Tighten the screws firmly but not overly tight, ensuring a secure connection between the TV and the stand.
7. Double-check all the screws and fixings to ensure they are properly tightened and secure.

By following these steps, you have successfully mounted the stand neck onto the base of the LG OLED TV stand and attached it to your TV. This ensures that your TV is securely held in place and ready for the next step. Now, let’s move on to attaching the TV to the stand.

Step 5: Attaching the TV to the Stand

With the stand neck securely mounted, it’s time to attach your TV to the LG OLED TV stand. Follow these steps:

1. Position your TV face down on a soft and padded surface to prevent any scratches or damage to the screen.
2. Locate the mounting holes or slots on the back of your TV. These holes are usually covered by plastic caps or screw covers.
3. Remove the plastic caps or screw covers from the mounting holes.
4. Align the TV’s mounting holes with the corresponding holes on the stand bracket attached to the stand neck.
5. Insert the included screws through the TV’s mounting holes and into the stand bracket.
6. Using a Phillips screwdriver, tighten the screws securely, ensuring that the TV is firmly attached to the stand bracket.
7. Double-check all the screws and fixings to ensure they are properly tightened and secure.

By following these steps, you have successfully attached your TV to the LG OLED TV stand. The TV is now securely mounted to the stand, providing a stable and secure viewing experience. Now, let’s move on to the final step of the assembly process.

Step 6: Adjusting the TV Position

Now that your TV is securely attached to the LG OLED TV stand, it’s time to adjust its position for optimal viewing. Follow these steps:

1. Carefully lift the TV together with the stand and position it in the desired location.
2. Ensure that the TV is placed on a stable and level surface to prevent any wobbling or instability.
3. If necessary, adjust the angle of the TV by using the tilting mechanism provided. Refer to the user manual for specific instructions on how to adjust the tilt angle.
4. Depending on the model of your LG OLED TV stand, you may also have the option to swivel the TV left or right. If swivel functionality is available, adjust the angle according to your preference.
5. Take a step back and assess the TV’s position to ensure that it is centered and aligned with your viewing area.
6. Make any additional adjustments to the TV’s position or viewing angle until you are satisfied with the result.

By following these steps, you have successfully adjusted the position of your TV on the LG OLED TV stand. Take some time to test different viewing angles and find the position that offers the best viewing experience for you and your family. Congratulations! You have completed the assembly process.

Remember to periodically check the screws and fixings to ensure they remain tightened and secure. Enjoy your new LG OLED TV and the immersive entertainment it brings to your living room!

Conclusion

Congratulations on successfully putting together the LG OLED TV stand! By following this comprehensive guide, you have learned how to unbox the stand, check its components, assemble the base, mount the stand neck, attach the TV to the stand, and adjust the TV’s position for optimal viewing.

The LG OLED TV stand provides a sturdy and stylish support system for your TV, allowing you to enjoy your favorite shows, movies, and games with ease. Its sleek design and secure attachment ensure a stable viewing experience, enhancing the overall aesthetics of your living room.

Remember, it’s important to follow the instructions provided in the user manual and use the recommended tools to ensure precise and safe assembly. Take your time during each step and double-check all the screws and fixings to ensure they are properly tightened and secure.

Once your TV is securely mounted on the stand, feel free to adjust the position, tilt, and swivel angle to find the perfect viewing experience for you and your family. And don’t forget to periodically check the screws and fixings to ensure they remain tight and secure over time.

Now that you know how to put together the LG OLED TV stand, sit back, relax, and enjoy the immersive entertainment it brings to your living room. Spend quality time with loved ones, indulge in your favorite shows, and create memories that will last a lifetime.

Thank you for choosing an LG OLED TV and for trusting this guide to help you assemble its stand. We hope you have found this tutorial helpful and enjoyable. Happy viewing!