How To Make A Soap Dispenser Out Of A Jack Daniels Bottle

(Many of the links in this article redirect to a specific reviewed product. Your purchase of these products through affiliate links helps to generate commission for Storables.com, at no extra cost. Learn more)

Introduction

Are you a fan of unique and creative home decor? Do you enjoy repurposing items to give them a new lease of life? If so, you’re going to love this DIY project. In this article, we’ll show you how to make a soap dispenser out of a Jack Daniels bottle, adding a touch of rustic charm to your bathroom or kitchen.

Creating your own soap dispenser not only allows you to showcase your creativity but also helps reduce waste by repurposing an empty bottle. Plus, it adds a personal touch to your space, making it truly one-of-a-kind.

Before we dive into the project, let’s talk about the materials you’ll need.

Materials Needed

Before you get started, gather the following materials:

1. A Jack Daniels bottle (empty and cleaned)
2. A soap dispenser pump
3. A drill with a diamond drill bit
4. Masking tape
5. Water
6. Soap (liquid or foam)
7. Rubber grommet
8. Optional: Sandpaper or glass etching cream

Make sure to prepare a clean and spacious workspace before you begin. Now, let’s move on to the step-by-step process of creating your unique soap dispenser.

Step 1: Prepare the Jack Daniels Bottle

The first step in creating your soap dispenser is to prepare the Jack Daniels bottle. Start by thoroughly cleaning the bottle to remove any residue or labels. You can use warm soapy water or a mild cleaning solution to do this. Make sure to rinse the bottle well and allow it to dry completely.

Next, if you want to add a personal touch to your dispenser, you can choose to sand the bottle’s surface or use glass etching cream to create a frosted effect. This step is optional but can add a unique and decorative element to your soap dispenser.

Once you have the clean and decorated bottle, you can move on to the next step: creating the pump mechanism.

Remember, safety is paramount throughout this process. Wear protective gloves and goggles, and work in a well-ventilated area.

Step 2: Create the Pump Mechanism

Creating the pump mechanism is an important part of making your Jack Daniels soap dispenser functional.

First, take the soap dispenser pump that you have chosen and separate it into its individual components. You should have the pump head, dip tube, and collar.

Next, take the collar and place it on the bottle’s neck, making sure it fits securely. Use masking tape to mark the position where the collar sits firmly on the bottle.

Now, it’s time to drill a hole in the marked spot. Attach a diamond drill bit to your drill and carefully drill through the glass. Keep the glass surface and drill bit wet with water to minimize heat and prevent cracking.

Once the hole is drilled, remove any glass fragments and smooth the edges with sandpaper if necessary. Be careful not to cut yourself on any sharp edges.

Next, insert the rubber grommet into the hole. This will provide a snug fit for the pump mechanism and prevent any leaks. Make sure the grommet is seated securely.

Finally, reassemble the pump mechanism by inserting the dip tube into the collar and placing the pump head on top. Test the pump to ensure it functions properly.

Your soap dispenser is now ready for installation!

When making a soap dispenser out of a Jack Daniels bottle, make sure to thoroughly clean the bottle and remove any labels or residue before assembling the pump mechanism. This will ensure a clean and professional-looking finished product.

Step 3: Install the Pump into the Bottle

Now that you have created the pump mechanism, it’s time to install it into the Jack Daniels bottle.

Take the pump assembly and carefully lower it into the bottle. The dip tube should be submerged in the bottom of the bottle, reaching the desired depth for dispensing the soap.

Ensure that the collar fits securely on the bottle’s neck, with the rubber grommet creating a tight seal around the hole.

Press down firmly to ensure a snug fit, but be careful not to apply too much pressure that could cause the glass to crack.

Once the pump is securely in place, test it by pressing down on the pump head. If the soap is dispensed smoothly, without any leakage, you have successfully installed the pump into the bottle.

Adjust the collar or tighten it if necessary to prevent any excess movement or leaking.

Now that the pump is installed, it’s time to fill the bottle with your chosen soap.

Step 4: Fill the Bottle with Soap

With the pump securely installed, it’s time to fill the Jack Daniels bottle with your preferred soap.

First, choose whether you want to use liquid soap or foam soap. Both options are suitable for this DIY soap dispenser.

If you opt for liquid soap, carefully pour it into the bottle, making sure not to overfill it. Leave some space at the top to prevent overflow when the pump is used.

If you prefer foam soap, you can either purchase pre-made foam soap or create your own by diluting liquid soap with water. Pour the foam soap mixture into the bottle, leaving some room for foam expansion when pumping.

Ensure that the dip tube is fully submerged in the soap. This will allow the pump to draw up the soap and dispense it properly.

Once the bottle is filled with soap, take a moment to clean any spills or drips from the exterior of the bottle. A damp cloth or paper towel should do the trick.

At this stage, your soap dispenser is ready to be tested and used!

Step 5: Test and Use the Soap Dispenser

Now that your DIY Jack Daniels soap dispenser is fully assembled and filled with soap, it’s time to give it a test run and start using it in your bathroom or kitchen.

Press down on the pump head to dispense the soap. Observe how smoothly the soap is released, ensuring that the pump mechanism is working correctly. If you experience any issues, such as the pump not dispensing enough soap or leaking, double-check the installation and make any necessary adjustments.

Once you’re satisfied with the performance of the dispenser, place it in a convenient location near the sink or countertop. It’s important to have it within easy reach for efficient hand washing or dishwashing.

Encourage your family members or guests to use the soap dispenser instead of traditional soap bars to maintain hygiene and cleanliness. Regularly refill the soap as needed to ensure a continuous supply.

Remember, you can always customize your soap dispenser further by adding decorative labels or charms to the bottle. Get creative and make it truly unique!

Enjoy the satisfaction of using an eco-friendly and stylish soap dispenser that you made yourself.

Conclusion

Congratulations on successfully creating your very own soap dispenser out of a Jack Daniels bottle! Not only have you repurposed an item that would have otherwise been discarded, but you have also added a unique and rustic touch to your home decor.

Throughout this DIY project, you have learned how to prepare the Jack Daniels bottle, create the pump mechanism, install the pump into the bottle, fill it with soap, and test the dispenser’s functionality. The end result is a functional and stylish soap dispenser that adds a touch of personality to your bathroom or kitchen.

Remember, you can always experiment with different bottle shapes and designs to suit your preferences. Whether it’s a whiskey bottle, wine bottle, or any other glass container, the possibilities for creating customized soap dispensers are endless.

By making your soap dispenser, you’ve not only showcased your creativity but also contributed to reducing waste and promoting sustainability. Plus, you now have a unique conversation starter that will surely impress your family and friends.

So go ahead, enjoy the convenience, cleanliness, and charm of your homemade soap dispenser. Happy washing!