How To Lower Levolor Window Blinds

(Many of the links in this article redirect to a specific reviewed product. Your purchase of these products through affiliate links helps to generate commission for Storables.com, at no extra cost. Learn more)

Introduction

Welcome to our comprehensive guide on how to lower Levolor window blinds. Levolor is a well-known brand that produces high-quality and stylish window blinds. However, there may come a time when you need to adjust the length of your Levolor blinds to better suit your window or room. Fortunately, lowering Levolor window blinds is a relatively straightforward process that can be done with a few simple steps.

In this article, we will walk you through the process of lowering Levolor window blinds, providing you with step-by-step instructions and helpful tips along the way. Whether you’re looking to create a more comfortable and aesthetically pleasing environment in your home or office, this guide will assist you in achieving your desired window blind height.

Before we dive into the details, let’s take a look at the tools and materials you’ll need for this project.

Tools and Materials Required

Before you begin the process of lowering your Levolor window blinds, gather the following tools and materials:

• Measuring tape or ruler
• Pliers
• Scissors
• Screwdriver
• Replacement cord (if necessary)

Having these tools and materials on hand will ensure that you have everything you need to successfully complete the task. Once you have gathered these items, it’s time to move on to the step-by-step process of lowering your Levolor window blinds.

Step 1: Removing the Blinds

The first step in lowering Levolor window blinds is to remove them from the window. Follow these instructions:

1. Use a screwdriver to remove any mounting brackets or hardware that are securing the blinds to the window frame. Set the screws aside for later use.
2. If your blinds have a valance or decorative top cover, gently remove it by sliding it off the front of the blinds or by detaching any clips or brackets holding it in place.
3. Next, locate the blinds’ cord lock mechanism, usually positioned on the right side of the blinds. Use pliers to loosen the cord lock and release the blinds. Slowly lower the blinds down, making sure to hold onto them to prevent any sudden falls.
4. If your blinds are equipped with a tilt mechanism, make sure to adjust it to its fully open position before lowering the blinds completely.
5. Once the blinds are fully lowered, detach any remaining cords or strings from the bottom rail of the blinds. Carefully remove the blind slats from the bottom rail by sliding them out one by one. Set them aside in a safe place.
6. If you need to adjust or replace the cords, now is the right time to do so. Measure and cut the cords to the desired length, ensuring that they are long enough to reach the bottom of the blinds when reassembled.

With the blinds successfully removed and the cords adjusted if necessary, you’re ready to proceed to the next step: adjusting the cord length.

Step 2: Adjusting the Cord Length

Now that you have removed the Levolor window blinds from the window and prepared the cords, it’s time to adjust their length. Follow these steps:

1. Starting at the bottom rail of the blinds, locate the lift cords. Depending on the style of your blinds, there may be multiple lift cords.
2. Using the pliers, carefully untie or remove any knots securing the cords to the bottom rail.
3. Measure the desired length for the blinds by extending the cords downward. Remember to factor in any extra length needed for knot tying and securing the cords to the bottom rail.
4. Using scissors, cut the cords to the measured length. Be sure to cut all the cords to the same length to ensure even lifting of the blinds.
5. Once the cords are cut to the desired length, tie secure knots at the bottom of each cord to prevent fraying and unraveling.
6. If you’re replacing the cords, carefully feed the new cords through the holes in the bottom rail, ensuring that they are aligned with the existing cord holes.
7. Once the cords are in place, tie knots at the ends of the cords to secure them to the bottom rail.

With the cord length adjusted or replaced, you can now move on to the next step: reattaching the blinds.

To lower Levolor window blinds, simply pull the cord or use the wand to tilt the slats downward. If the blinds are cordless, gently push down on the bottom rail to lower them.

Step 3: Reattaching the Blinds

After adjusting the cord length, it’s time to reattach the Levolor window blinds. Follow these simple steps:

1. Take the blind slats that were set aside earlier and slide them back one by one into the ladder tape or cord loops at the top of the blinds. Ensure that each slat is properly aligned and seated securely in place.
2. If necessary, reposition any tilt rods or control wand mechanisms to their appropriate slots or holders on the blinds.
3. Once the slats are in place, thread the lift cords through the holes in the slats, ensuring that the cords are evenly spaced and aligned.
4. With the lift cords threaded through the slats, reattach or tie a secure knot on each cord near the last slat to prevent the cords from slipping out.
5. With the blinds fully reassembled, gently lift them up to test the smoothness of the cord operation. Ensure that the blinds can be raised and lowered without any obstructions or entanglements.
6. If necessary, adjust the knots on the lift cords to fine-tune the height setting of the blinds.

With the blinds securely reattached and the lift cords properly adjusted, it’s time for the final step: testing and making any necessary adjustments.

Step 4: Testing and Final Adjustments

Now that you have reattached the Levolor window blinds, it’s important to test their functionality and make any final adjustments as needed. Follow these steps:

1. Gently raise the blinds by pulling the lift cords. Ensure that the blinds smoothly and evenly lift up without any resistance or uneven movement.
2. Lower the blinds back down and observe the cord length to ensure that the blinds are at the desired height. If necessary, adjust the knots on the lift cords to fine-tune the height setting.
3. If your Levolor blinds have a tilting mechanism, test it out to ensure that the blinds tilt open and close smoothly. Adjust the tilt mechanism if necessary.
4. Make sure that all cords and mechanisms are properly aligned and secured within the blinds. Check for any loose or dangling cords that may pose a safety hazard.
5. Reattach any valance or decorative top cover that was removed earlier, ensuring that it fits securely and complements the newly adjusted blinds.
6. Step back and admire your newly lowered Levolor window blinds, enjoying the improved aesthetics and functionality they provide.

Congratulations! You have successfully lowered your Levolor window blinds. By following these steps and making any necessary adjustments, you have achieved the desired height for your blinds, creating a more comfortable and visually appealing environment in your space.

Remember, always exercise caution when working with blinds and make sure to follow the manufacturer’s instructions for your specific blinds model. If you encounter any difficulties or are unsure about any steps, it’s recommended to consult a professional or contact the Levolor customer support for assistance.

Thank you for using our guide on how to lower Levolor window blinds. We hope this article has been helpful in your home improvement journey.

Conclusion

Lowering Levolor window blinds is a simple yet effective way to customize the height and functionality of your window treatments. Whether you need to adjust the blinds for better privacy, light control, or simply to achieve a more aesthetically pleasing look, following the steps outlined in this guide will help you achieve the desired results.

By removing the blinds, adjusting the cord length, reattaching the blinds, and making any necessary final adjustments, you can successfully lower your Levolor window blinds with ease. Just remember to work carefully, follow the manufacturer’s instructions, and ensure that all cords, mechanisms, and components are properly aligned and secured.

With your newly lowered Levolor window blinds, you can enjoy improved functionality and create a more comfortable and visually appealing environment in your home or office. Whether you’re upgrading your space or simply looking for a quick DIY project, this guide has provided you with the necessary steps and tips to achieve your desired window blind height.

Thank you for choosing our comprehensive guide on how to lower Levolor window blinds. We hope that the information provided has been valuable and that you have found success in adjusting your Levolor blinds to fit your needs. Should you have any further questions or concerns, don’t hesitate to reach out to Levolor customer support or consult a professional for assistance. Happy blinds adjusting!