How Install Supco Kegerator Wire Fan

(Many of the links in this article redirect to a specific reviewed product. Your purchase of these products through affiliate links helps to generate commission for Storables.com, at no extra cost. Learn more)

Introduction

Welcome to this comprehensive guide on how to install a Supco wire fan in your kegerator. A kegerator is a fantastic appliance for keeping your favorite beer cold and ready to serve, but sometimes the built-in cooling system may need a little boost. That’s where a wire fan comes in handy. By installing a wire fan, you can improve air circulation inside the kegerator, ensuring a consistently cool temperature and preventing hot spots.

In this article, we will walk you through the step-by-step process of installing a Supco wire fan in your kegerator. The Supco wire fan is a popular choice among kegerator owners due to its durability and effectiveness in enhancing cooling performance.

Before we dive into the installation process, let’s quickly go over the benefits of installing a wire fan in your kegerator:

• Better Temperature Control: By improving air circulation, the wire fan helps maintain a consistent temperature throughout the kegerator, ensuring that your beer stays at the ideal temperature for optimal taste.
• Prevents Hot Spots: Hot spots can occur when cool air is not evenly distributed inside the kegerator. A wire fan helps prevent hot spots by circulating air and preventing temperature variations.
• Energy Efficiency: With a wire fan installed, your kegerator’s cooling system doesn’t have to work as hard to maintain the desired temperature. This can result in energy savings and prolong the lifespan of your kegerator.
• Extend the Lifespan of the Compressor: By promoting air circulation, the wire fan helps reduce the workload on the compressor, leading to less strain and potential prolonging its lifespan.

Now that we understand the benefits of installing a wire fan in your kegerator, let’s move on to the step-by-step installation process. Grab your tools and let’s get started!

Step 1: Gather the Required Materials

Before you begin the installation process, it’s important to gather all the necessary materials. Having everything on hand will help make the installation process smoother and more efficient. Here’s a list of the materials you’ll need:

• Supco wire fan kit: This kit typically includes a wire fan, mounting brackets, and screws.
• Screwdriver: You’ll need a screwdriver to attach the mounting brackets and secure the fan.
• Drill and drill bit: If your kegerator doesn’t have pre-drilled holes for mounting the fan, you’ll need a drill and an appropriate drill bit to create the necessary holes.
• Zip ties or wire clamps: These will be used to secure the wires and ensure they are neatly organized.
• Electrical tape: It’s always a good idea to have electrical tape on hand for any electrical wiring connections.
• Optional: Wire connectors or wire nuts: These can be used for more secure wire connections, but electrical tape can suffice if necessary.

Make sure to double-check the contents of the fan kit box and have all the required tools before proceeding with the installation. Having everything ready will save you time and prevent any frustrating delays during the process.

Once you have gathered all the necessary materials, you’re ready to move on to preparing the kegerator for the installation. This is where you’ll get everything set up and make any necessary adjustments to accommodate the wire fan. Let’s dive into Step 2: Prepare the Kegerator!

Step 2: Prepare the Kegerator

Before installing the wire fan, you need to prepare the kegerator by making some adjustments and ensuring it is ready to accommodate the fan. Follow these steps:

1. Empty the Kegerator: Start by removing all kegs, bottles, and other items from the kegerator. You need a clear space to work with and avoid any potential damage to your beverages during the installation process.
2. Power off the Kegerator: Safely disconnect the kegerator from the power source. This step is crucial to prevent any electrical accidents while working on the installation.
3. Locate the Optimal Fan Placement: Take a moment to determine the best location to install the wire fan inside the kegerator. Ideally, you want to place it in an area where the fan can evenly distribute cold air throughout the entire kegerator. Look for a spot that doesn’t obstruct any shelves or interfere with the keg placement.
4. If Needed, Drill Mounting Holes: Depending on your kegerator model, you may need to drill holes for mounting the fan. Use a drill and an appropriate drill bit to create the necessary holes. Make sure to measure and mark the spots accurately before drilling. Take caution to avoid damaging any internal components or puncturing coolant lines.
5. Clean the Area: Before proceeding, it’s a good idea to clean the area where you’ll be installing the fan. Wipe down any dust or debris to ensure proper adhesion and optimal performance.

Once you have prepared the kegerator, it’s time to move on to the actual installation by attaching the wire fan. In the next step, we’ll guide you through the process of attaching the fan securely. Let’s continue to Step 3: Attach the Fan!

Step 3: Attach the Fan

With the kegerator prepared, it’s time to attach the wire fan. Follow these steps to ensure a secure and proper installation:

1. Align Mounting Brackets: Take the mounting brackets included in the Supco wire fan kit and align them with the pre-drilled holes or the holes you drilled in the previous step. Ensure that the brackets are level and properly positioned.
2. Secure the Mounting Brackets: Once the mounting brackets are aligned, use a screwdriver to insert the screws provided with the kit and secure the brackets to the kegerator. Tighten them firmly to ensure stability, but be careful not to overtighten and damage the kegerator’s interior.
3. Place the Fan on the Mounting Brackets: Carefully place the wire fan onto the mounted brackets. Some wire fans have a sliding mechanism on the brackets to easily secure the fan in place. Make sure the fan sits snugly on the brackets and feels secure.
4. Double-Check Alignment: Take a moment to double-check the alignment of the fan. Ensure that it is centered and positioned properly. Adjust the fan if necessary to achieve optimal placement.
5. Ensure Proper Clearance: Confirm that the fan does not interfere with other components inside the kegerator, such as shelves or kegs. It’s essential to have proper clearance to allow for unobstructed airflow throughout the kegerator.

Once you have successfully attached the wire fan to the kegerator, it’s time to move on to the next step: connecting the wires. In Step 4, we will guide you through the process of connecting the wires securely and professionally. Let’s proceed!

When installing a Supco kegerator wire fan, make sure to carefully follow the manufacturer’s instructions and use the appropriate tools for a secure and proper installation. It’s important to position the fan in a way that allows for optimal air circulation within the kegerator.

Step 4: Connect the Wires

Now that the fan is securely attached to the mounting brackets, it’s time to connect the wires and ensure proper functionality. Follow these steps to connect the wires effectively:

1. Locate the Wire Connections: Take a moment to locate the wire connections on both the fan and the kegerator. The fan will typically have two wires – a positive (red) wire and a negative (black) wire. The kegerator may have a designated wire connection point or a terminal strip for easy wire connection.
2. Strip the Wire Ends: Use wire strippers to carefully strip the insulation off the ends of the fan wires. Strip off approximately 1/4 inch of insulation to expose the bare wire.
3. Prepare the Kegerator Wires: If the kegerator has wire connectors or a terminal strip, prepare the wires by stripping off the appropriate amount of insulation. Match the length to the fan wire ends to ensure a secure connection.
4. Connect the Wires: Connect the positive (red) wire from the fan to the positive wire of the kegerator, and the negative (black) wire from the fan to the negative wire of the kegerator. There are various methods to connect the wires, such as using wire connectors, wire nuts, or twisting the wires together and securing them with electrical tape. Choose a method that provides a secure and safe connection.
5. Secure the Wire Connections: Once the wires are connected, ensure that they are securely fastened and insulated. Use wire connectors, wire nuts, or wrap the connections with electrical tape to protect against any potential electrical hazards.

After connecting the wires, give them a gentle tug to ensure they are tightly secured. It’s crucial to have reliable wire connections to ensure proper functionality of the wire fan.

With the wires connected, it’s time to move on to the next step: mounting the fan within the kegerator. In Step 5, we will guide you through the process of securely mounting the fan to enhance its effectiveness. Let’s continue!

Step 5: Mount the Fan

With the wires securely connected, the next step is to mount the fan within the kegerator. Properly mounting the fan will ensure optimal airflow and cooling performance. Follow these steps to mount the fan:

1. Position the Fan: Carefully position the fan inside the kegerator in the previously determined optimal location. Make sure it is centered and does not obstruct any shelves or kegs.
2. Secure the Fan: Use the provided screws or any appropriate mounting hardware to secure the fan to the kegerator. The mounting brackets provided with the Supco wire fan kit can typically be adjusted to achieve the desired angle and position of the fan.
3. Check for Clearance: Confirm that the mounted fan does not interfere with any other components inside the kegerator. Ensure that there is adequate clearance for unobstructed airflow.
4. Double-Check Stability: Once the fan is mounted, give it a gentle shake to ensure it is securely fastened. If there is any wobbling or instability, adjust the mounting brackets or tighten the screws as necessary.

Properly mounting the fan is essential to ensure efficient cooling and airflow within the kegerator. Take your time to position and secure the fan properly for optimal performance.

With the fan securely mounted, it’s time to move on to the final step: testing the fan to ensure proper operation. In Step 6, we will guide you through the process of testing the fan and making any necessary adjustments. Let’s proceed!

Step 6: Test the Fan

After successfully installing and mounting the fan in your kegerator, it’s crucial to test its operation to ensure proper functionality and performance. Follow these steps to test the fan:

1. Reconnect the Power: Make sure the kegerator is still powered off from Step 2. Reconnect the kegerator to the power source.
2. Power on the Kegerator: Turn on the kegerator and allow it to run for a few minutes to reach its normal operating temperature. This will ensure accurate testing of the fan’s functionality.
3. Monitor Airflow: As the kegerator runs, carefully observe the airflow inside. Pay attention to how the fan circulates the air and if you notice any changes in temperature distribution or hot spots.
4. Listen for Operation: Listen for any unusual noises or vibrations coming from the fan. Ideally, the fan should operate quietly and smoothly without any noticeable disruptions.
5. Check Temperature Stability: Use a thermometer or the kegerator’s built-in temperature display to monitor the temperature stability inside. The fan should help maintain a consistent and desired temperature throughout the kegerator.
6. Make Necessary Adjustments: If you notice any issues or areas for improvement during the testing phase, take note and make the necessary adjustments. This may involve repositioning the fan, adjusting the fan speed, or troubleshooting any wiring or connection problems.

By thoroughly testing the fan, you can ensure that it is operating properly to enhance the cooling performance of your kegerator. If you encounter any difficulties or concerns during the testing phase, consult the manufacturer’s instructions or seek professional assistance.

Congratulations on successfully installing and testing the wire fan in your kegerator! With the improved airflow and temperature control, you can now enjoy your favorite beers at the perfect temperature. Cheers!

Now that you have completed the installation and testing process, feel free to make any necessary adjustments or fine-tune the fan’s positioning to further optimize its performance. Remember to refer back to this guide whenever you need to reinstall or replace the wire fan in the future.

Thank you for following this step-by-step guide on how to install a Supco wire fan in your kegerator. We hope this information has been helpful and that you now have a cooler, more efficient kegerator setup. Enjoy your perfectly chilled beers and happy brewing!

Conclusion

Congratulations! You have successfully installed a Supco wire fan in your kegerator, enhancing its cooling performance and ensuring a consistently cold temperature for your favorite beers. By following this comprehensive guide, you have gained the knowledge and skills to install and test a wire fan in your kegerator effectively.

Throughout the installation process, you learned about the benefits of having a wire fan, including better temperature control, prevention of hot spots, energy efficiency, and extended compressor lifespan. By improving air circulation inside the kegerator, the wire fan helps create an optimal environment for storing and serving your beloved brews.

Remember, it is essential to gather all the required materials before beginning the installation, prepare the kegerator by emptying it and powering it off, and carefully attach the fan and connect the wires. By taking the time to mount the fan securely and test its operation, you have ensured proper functionality and performance.

If, during the testing phase, you encounter any issues or areas for improvement, don’t hesitate to make the necessary adjustments. Proper positioning, wire connections, and temperature stability are key factors in maximizing the efficacy of the wire fan.

We hope this guide has been informative and helpful in guiding you through the process of installing a Supco wire fan in your kegerator. Enjoy the enhanced cooling performance, consistent temperatures, and perfectly chilled beers!

Cheers to your successful kegerator upgrade, and happy brewing!